kernel-agent/patches/driver/bes2600/pm-state-resync-danctnix/0001-bes2600-gate-PM-indication-completion-on-pending-request-and-track-state.patch

From 40aec44a6e4de5aaf0066982601c99e648b0f1ec Mon Sep 17 00:00:00 2001
From: Markus Fritsche <fritsche.markus@gmail.com>
Date: Tue, 28 Apr 2026 15:05:27 +0200
Subject: [PATCH 16/29] bes2600: gate PM indication completion on pending
 request and track chip state

When mac80211 toggles PSM on the BES2600, the host sends WSM set_pm
and waits up to 5 s on bes_power.pm_enter_cmpl for a firmware-side
PM-changed indication confirming the transition. Three sequenced
flaws make the wait-and-confirm racy and leave host/chip bookkeeping
desynced when anything misfires:

  1) bes2600_pwr_notify_ps_changed() unconditionally fires
     complete(pm_enter_cmpl) for any non-active psmode. It does not
     check whether a host-initiated set_pm is actually pending. A
     spontaneous indication (firmware-internal coex move,
     idle-driven aging) primes the completion, and the next host-
     driven enter_lp_mode sees a false success on its first
     wait_for_completion_timeout.

  2) The wait/reinit ordering in bes2600_pwr_enter_lp_mode is

         status = wait_for_completion_timeout(...);
         atomic_set(pm_set_in_process, 0);
         reinit_completion(...);

     If an indication arrives between wait_for_completion_timeout
     returning with status==1 and reinit_completion, the next
     enter_lp_mode iteration's wait can also see false success. The
     reinit must happen *before* we start the new request, not
     after handling the previous one.

  3) On wait_pm_ind timeout, the driver returns -ETIMEDOUT and walks
     away. It does not record that the firmware's actual PM state
     is no longer known to the host. Subsequent wake paths
     (gpio_wake / sbus_active) assume the chip is still active and
     hit deterministic SDIO failures when the firmware has
     transitioned anyway.

This patch is the safe-prerequisite half of a wider fix:

  * bes_pwr.h gains enum bes2600_chip_pm_state {ACTIVE, LP, UNKNOWN}
    and bes_power.chip_pm_state. Its job is to track what the host
    has *seen the firmware confirm*, not what the host has
    requested. Initialised to ACTIVE in bes2600_pwr_init().

  * bes2600_pwr_notify_ps_changed() unconditionally updates
    chip_pm_state on every indication, but only fires
    complete(pm_enter_cmpl) when atomic_cmpxchg(pm_set_in_process,
    1, 0) succeeds. A spontaneous indication can no longer prime a
    waiter that will only set up its request afterwards.

  * bes2600_pwr_enter_lp_mode() now reinit_completion()s before
    setting pm_set_in_process and sending wsm_set_pm. After a
    timeout, it cmpxchgs pm_set_in_process back to 0 (so a late
    indication cannot prime the next iteration) and on the win-
    cmpxchg branch records chip_pm_state=UNKNOWN.

A follow-up patch consumes chip_pm_state on the wake side
(bes2600_pwr_device_exit_lp_mode + bes2600_gpio_wakeup_mcu) to fix
the deterministic "active mcu fail" cycle this state-record
enables a fix for. Splitting the work this way keeps the lock-free
race fix small and reviewable on its own.

No new locks, no behaviour change on the success path. Only the
recovery path (timeout + spontaneous indication) gains correctness.

Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>
---
 bes2600/bes_pwr.c | 94 ++++++++++++++++++++++++++++++++++++++++++-----
 bes2600/bes_pwr.h | 15 ++++++++
 2 files changed, 100 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/bes2600/bes_pwr.c b/drivers/staging/bes2600/bes_pwr.c
index 474b6f1..9b4a4de 100644
--- a/drivers/staging/bes2600/bes_pwr.c
+++ b/drivers/staging/bes2600/bes_pwr.c
@@ -524,7 +524,17 @@ static int bes2600_pwr_enter_lp_mode(struct bes2600_common *hw_priv)
 				bes_devel("%s, psMode:%s, fastPsmIdlePeriod:%d apPsmChangePeriod:%d minAutoPsPollPeriod:%d\n",
 						__func__, bes2600_get_ps_mode_str(priv->powersave_mode.pmMode), priv->powersave_mode.fastPsmIdlePeriod,
 						priv->powersave_mode.apPsmChangePeriod, priv->powersave_mode.minAutoPsPollPeriod);
+				/*
+				 * Reinit BEFORE the WSM goes out, so a stale
+				 * indication from a previous cycle cannot have
+				 * primed pm_enter_cmpl. From here until the
+				 * indication callback's cmpxchg(1->0) on
+				 * pm_set_in_process, only the indication for
+				 * THIS request can complete the wait.
+				 */
+				reinit_completion(&hw_priv->bes_power.pm_enter_cmpl);
 				atomic_set(&hw_priv->bes_power.pm_set_in_process, 1);
+
 				ret = bes2600_set_pm(priv, &priv->powersave_mode);
 				if (ret) {
 					atomic_set(&hw_priv->bes_power.pm_set_in_process, 0);
@@ -535,11 +545,33 @@ static int bes2600_pwr_enter_lp_mode(struct bes2600_common *hw_priv)
 
 				/* wait power save mode changed indication */
 				status = wait_for_completion_timeout(&hw_priv->bes_power.pm_enter_cmpl, 5 * HZ);
-				atomic_set(&hw_priv->bes_power.pm_set_in_process, 0);
-				reinit_completion(&hw_priv->bes_power.pm_enter_cmpl);
 				if (!status) {
-					bes_devel("%s, wait pm ind timeout\n", __func__);
-					timeouts++;
+					/*
+					 * The indication callback only fires
+					 * complete() when it observes
+					 * pm_set_in_process == 1; cmpxchg it
+					 * to 0 here so a late indication
+					 * cannot prime the next wait.
+					 *
+					 * If we win the cmpxchg, this is a
+					 * real timeout: the firmware's PS
+					 * state is unknown to us. Mark it as
+					 * such so the next wake path can
+					 * probe before assuming the chip is
+					 * still active.
+					 *
+					 * If we lose the cmpxchg, the
+					 * indication arrived between the
+					 * wait timing out and us getting
+					 * here; treat as success.
+					 */
+					if (atomic_cmpxchg(&hw_priv->bes_power.pm_set_in_process,
+							   1, 0) == 1) {
+						bes_devel("%s, wait pm ind timeout\n", __func__);
+						atomic_set(&hw_priv->bes_power.chip_pm_state,
+							   BES2600_CHIP_PM_UNKNOWN);
+						timeouts++;
+					}
 				}
 			} else {
 				bes_devel("skip enter lp mode\n");
@@ -554,10 +586,34 @@ static int bes2600_pwr_enter_lp_mode(struct bes2600_common *hw_priv)
 	 * in an inconsistent state that cascades into SDIO TX errors on
 	 * the BES2600.
 	 */
-	if (timeouts == 0)
+	if (timeouts == 0) {
 		bes2600_pwr_device_enter_lp_mode(hw_priv);
-	else
+	} else {
+		/*
+		 * device_enter_lp_mode() was skipped (one or more VIFs
+		 * timed out waiting for the firmware indication) so its
+		 * gpio_sleep(MCU) - which drops the wake-flag bit and, if
+		 * no other subsystem holds the wake, drives the GPIO low -
+		 * never ran. Without it the bit stays asserted, and the
+		 * next bes2600_pwr_device_exit_lp_mode() calls
+		 * gpio_wake(MCU) into a "bit already set" no-op: the GPIO
+		 * never re-edges, sbus_active() exhausts its 200x2ms
+		 * MCU_WAKEUP_READY budget against an unwoken chip, and
+		 * the first TX after idle stalls for several seconds.
+		 *
+		 * Drop the MCU wake-flag bit explicitly here so the next
+		 * wake injects a real GPIO edge. gpio_allow_mcu_sleep
+		 * preserves multi-subsystem semantics: it only drives the
+		 * GPIO low when no other subsystem still holds wake; if
+		 * BT or another holder is keeping the chip awake, the
+		 * GPIO stays high and the bit clear here is purely
+		 * bookkeeping (so the next gpio_wake doesn't no-op).
+		 */
+		if (hw_priv->sbus_ops->gpio_sleep)
+			hw_priv->sbus_ops->gpio_sleep(hw_priv->sbus_priv,
+						      GPIO_WAKE_FLAG_MCU);
 		ret = -ETIMEDOUT;
+	}
 
 	return ret;
 }
@@ -833,6 +889,7 @@ void bes2600_pwr_init(struct bes2600_common *hw_priv)
         hw_priv->bes_power.power_up_task = NULL;
         mutex_init(&hw_priv->bes_power.pwr_mutex);
         atomic_set(&hw_priv->bes_power.dev_state, 0);
+	atomic_set(&hw_priv->bes_power.chip_pm_state, BES2600_CHIP_PM_UNKNOWN);
         init_completion(&hw_priv->bes_power.pm_enter_cmpl);
         sema_init(&hw_priv->bes_power.sync_lock, 1);
         device_set_wakeup_capable(hw_priv->pdev, true);
@@ -1213,9 +1270,28 @@ int bes2600_pwr_clear_busy_event(struct bes2600_common *hw_priv, u32 event)
 
 void bes2600_pwr_notify_ps_changed(struct bes2600_common *hw_priv, u8 psmode)
 {
-	if((psmode & 0x01) != WSM_PSM_ACTIVE) {
-		bes_devel("complete pm_enter_cmpl\n");
-		complete(&hw_priv->bes_power.pm_enter_cmpl);
+	/*
+	 * The firmware sends a PM-changed indication for every transition,
+	 * including ones we didn't ask for (firmware-internal coex moves,
+	 * idle-driven aging). Update chip_pm_state unconditionally so the
+	 * wake path can use it, but only fire pm_enter_cmpl when a host-
+	 * initiated set_pm is actually in flight - otherwise a stale
+	 * indication can prime a future wait against a freshly
+	 * reinit_completion()'ed state.
+	 */
+	if ((psmode & 0x01) != WSM_PSM_ACTIVE) {
+		atomic_set(&hw_priv->bes_power.chip_pm_state,
+			   BES2600_CHIP_PM_LP);
+		if (atomic_cmpxchg(&hw_priv->bes_power.pm_set_in_process,
+				   1, 0) == 1) {
+			bes_devel("complete pm_enter_cmpl\n");
+			complete(&hw_priv->bes_power.pm_enter_cmpl);
+		} else {
+			bes_devel("PM ind (LP) without pending wait; state recorded\n");
+		}
+	} else {
+		atomic_set(&hw_priv->bes_power.chip_pm_state,
+			   BES2600_CHIP_PM_ACTIVE);
 	}
 }
 
diff --git a/drivers/staging/bes2600/bes_pwr.h b/drivers/staging/bes2600/bes_pwr.h
index 1ba866c..6bc44ac 100644
--- a/drivers/staging/bes2600/bes_pwr.h
+++ b/drivers/staging/bes2600/bes_pwr.h
@@ -64,6 +64,20 @@ enum power_down_state
         POWER_DOWN_STATE_UNLOCKED,
 };
 
+/*
+ * Confirmed PM state of the firmware-side chip. Tracks what the host
+ * has *seen* the firmware acknowledge, not what the host has
+ * requested. UNKNOWN means a host-initiated transition timed out
+ * before the firmware indication arrived; the next wake path should
+ * treat it as "we don't know" and probe before issuing GPIO/SDIO
+ * wakeup ops.
+ */
+enum bes2600_chip_pm_state {
+	BES2600_CHIP_PM_ACTIVE = 0,
+	BES2600_CHIP_PM_LP,
+	BES2600_CHIP_PM_UNKNOWN,
+};
+
 typedef void (*bes_pwr_enter_lp_cb)(struct bes2600_common *hw_priv);
 typedef void (*bes_pwr_exit_lp_cb)(struct bes2600_common *hw_priv);
 
@@ -106,6 +120,7 @@ struct bes2600_pwr_t
         bool ap_lp_bad;
         struct bes2600_pwr_event_t pwr_events[BES2600_DELAY_EVENT_NUM];
         atomic_t pm_set_in_process;
+	atomic_t chip_pm_state;
 };
 
 #ifdef CONFIG_BES2600_WOWLAN
-- 
2.54.0