The bes2600 driver is a fork of the upstream cw1200 driver
(drivers/net/wireless/st/cw1200/, ST-Ericsson, Dmitry Tarnyagin
2010-2011). The fork's file headers have three GPL-compliance issues:
1. NO SPDX-License-Identifier on any of 48 source files (cw1200
mainline has them on all 25). kernel.org-mandated since 2017.
2. Original "Copyright (c) 2010, ST-Ericsson" lines stripped from
all files inherited from cw1200, replaced with
"Copyright (c) 2010, Bestechnic" — factually impossible
(Bestechnic did not author the 2010 work) and a GPL-2.0 §1
attribution-preservation violation.
3. The "GPL version 2 as published by the Free Software Foundation"
boilerplate paragraph is redundant alongside SPDX and is the
legacy form modern kernel sources have replaced.
This patch corrects all three for the 48 .c/.h files in bes2600/:
- Adds `// SPDX-License-Identifier: GPL-2.0-only` (or `/* ... */`
for headers) as line 1 of every file.
- Restores `Copyright (c) 2010, ST-Ericsson` + `Author: Dmitry
Tarnyagin <dmitry.tarnyagin@lockless.no>` as the FIRST copyright
chain entry on all 22 files derived from cw1200 (bh.{c,h},
debug.{c,h}, fwio.{c,h}, hwio.{c,h}, main.c, pm.{c,h},
queue.{c,h}, scan.{c,h}, sta.{c,h}, txrx.{c,h}, wsm.{c,h}).
- Keeps `Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.` as
the SECOND chain entry where Bestechnic genuinely contributed.
- Notes "Derived from cw1200_sdio.c" + ST-Ericsson copyright on
bes2600_sdio.c (heavy derivation, not a literal rename).
- Notes "Replaces hwbus.h from cw1200/" + ST-Ericsson copyright
on sbus.h.
- Preserves the prism54/islsm authorship chain on main.c and
bes2600.h (Michael Wu 2006 + Jean-Baptiste Note 2004-2006).
- Drops the GPL-2.0 boilerplate paragraph in favour of SPDX.
No code changes — only file-header comment blocks. Module build is
unaffected (verified by header-only diff scope).
This is a prerequisite for any kernel.org submission attempt. The
existing MODULE_LICENSE("GPL") + MODULE_AUTHOR(Tarnyagin@stericsson.com)
declarations were already present and are unchanged here; the
mismatch between MODULE_AUTHOR and the (since-corrected) per-file
copyrights is now resolved.
The shipped factory calibration file bes2600_factory.txt on PineTab2
(danctnix linux-firmware 0.3.5_2023.0209) contains 30 calibration
fields: head (3), iq/xtal (3), 2.4G power 11n (5), 5G power 11n (15),
bt (4). The file terminates with '%%\n' directly after edr_power.
When STANDARD_FACTORY_EFUSE_FLAG is defined at compile time the driver
assembles STANDARD_FACTORY with an extra select_efuse_flag section
appended and expects 31 sscanf matches (FACTORY_MEMBER_NUM=31):
__STANDARD_FACTORY + \"##select_efuse_flag\\nselect_efuse:%hx\\n\"
+ \"%%%%\\n\"
The PineTab2 factory.txt has no select_efuse_flag section, so sscanf
stops after field 30 and factory_parse() returns -1 with:
bes2600_factory.txt parse fail
read and check bes2600/bes2600_factory.txt error
factory cali data get failed.
This was latent until the preceding patch (use request_firmware() for
factory.txt read) fixed the path bug that masked the parse failure.
Default STANDARD_FACTORY_EFUSE_FLAG to n. The flag remains overridable
at build time (make STANDARD_FACTORY_EFUSE_FLAG=y ...) for chips /
firmware packages that do ship the select_efuse_flag section.
Also: the wsm_save_factory_txt_to_mcu() prototype in wsm.h was
inconsistently wrapped in a conditional that keyed on
STANDARD_FACTORY_EFUSE_FLAG, but the function definition in wsm.c and
the call site in sta.c are ungated. With the flag now defaulting to
n, the gcc -Werror=missing-prototypes flag breaks the build. Drop the
conditional wrapper around the prototype — the function exists and is
used regardless of the factory-parse flag.
Tested-on: PineTab2 (BES2600WM + RK3566) running linux-pinetab2
6.19.10-danctnix1-1. With the flag defaulted off, factory_parse()
succeeds on the shipped factory.txt, factory_cali_data is populated,
and dmesg no longer shows the parse-fail / read-and-check-error /
factory-cali-data-get-failed sequence.
Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>
test0r
Julian