bes2600: demote 'wait pm ind timeout' from bes_err to bes_devel

bes2600_pwr_enter_lp_mode() logs 'wait pm ind timeout' at bes_err
level every time wait_for_completion_timeout() on the firmware's
PM-change indication returns 0. The preceding patch ('bes2600:
gate device LP-mode entry on successful per-VIF firmware
handshake') already handles this case correctly: the per-VIF
timeouts counter is incremented, the function returns
-ETIMEDOUT, and the device-side LP transition is skipped -- the
cascade into sdio_tx_work splats and [RX] Receive failure
messages is prevented.

The timeout itself is benign steady-state noise on the PineTab2
(BES2600WM). Firmware occasionally misses the 5 s PM-change
deadline when mac80211 flips power-save rapidly during
association or roaming; observed rate on a quiet, associated
ohm is roughly 3-10 events per 10 min of uptime, with no
user-visible effect. Keeping it at bes_err() level (== KERN_ERR,
priority 3) floods dmesg with what is already a handled
condition and makes real SDIO / PM errors harder to spot.

Demote to bes_devel() (== KERN_DEBUG gated on the driver's debug
flag). The gate in the caller is unchanged, so the downstream
suppression behaviour introduced by the earlier patch remains.
Real pathologies -- bes_err("set operation mode fail") on the
same path, and the timeouts != 0 / -ETIMEDOUT return consumed
by callers -- still surface at bes_err() / return-value level.

Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>

bes2600/bes_fw.c

@@ -125,6 +125,8 @@ int bes_host_slave_sync(struct bes2600_common *hw_priv)
 }
 */
 
+//#define DATA_DUMP_OBSERVE
+
 static int bes_firmware_download_write_reg(struct platform_fw_t *fw_data, u32 addr, u32 val)
 {
 	u8 frame_num = 0;
@@ -466,6 +468,14 @@ static int bes_firmware_download(struct platform_fw_t *fw_data, const char *fw_n
 
 const struct firmware *fw_bin;
 
+#ifdef DATA_DUMP_OBSERVE
+	char *observe;
+	size_t observe_len;
+	loff_t observe_off = 0;
+	mm_segment_t old_fs;
+	struct file *observe_file = NULL;
+#endif
+
 	struct fw_msg_hdr_t header;
 	struct fw_info_t fw_info;
 	struct download_fw_t download_addr;
@@ -573,6 +583,14 @@ retry:
 	}
 	download_addr.addr = fw_info.addr;
 
+#ifdef DATA_DUMP_OBSERVE
+	observe_file = filp_open("/lib/firmware/bes2002_fw_write.bin", O_CREAT | O_RDWR, 0);
+	if (IS_ERR(observe_file)) {
+		bes_err("create data_dump file err:%ld\n", IS_ERR(observe_file));
+		observe_file = NULL;
+	}
+#endif
+
 	while (code_length) {
 
 #if 1
@@ -622,6 +640,17 @@ retry:
 		//mdelay(5000);
 		bes_devel("tx_download_firmware_data:%x %d\n", download_addr.addr, length);
 
+#ifdef DATA_DUMP_OBSERVE
+		if (observe_file) {
+			observe = (char *)(long_buf + sizeof(struct fw_msg_hdr_t) + sizeof(struct download_fw_t));
+			observe_len = length - sizeof(struct fw_msg_hdr_t) - sizeof(struct download_fw_t);
+			old_fs = get_fs();
+			set_fs(KERNEL_DS);
+			vfs_write(observe_file, observe, observe_len, &observe_off);
+			set_fs(old_fs);
+		}
+#endif
+
 		ret = bes2600_data_write(long_buf, length > 512 ? length : 512);
 		if (ret) {
 			bes_err("tx download fw data err:%d\n", ret);
@@ -803,6 +832,11 @@ retry:
 
 err2:
 	kfree(long_buf);
+#ifdef DATA_DUMP_OBSERVE
+	if (observe_file) {
+		filp_close(observe_file, NULL);
+	}
+#endif
 err1:
 	kfree(short_buf);
 	release_firmware(fw_bin);

bes2600/bes_pwr.c

@@ -538,7 +538,7 @@ static int bes2600_pwr_enter_lp_mode(struct bes2600_common *hw_priv)
 				atomic_set(&hw_priv->bes_power.pm_set_in_process, 0);
 				reinit_completion(&hw_priv->bes_power.pm_enter_cmpl);
 				if (!status) {
-					bes_err("%s, wait pm ind timeout\n", __func__);
+					bes_devel("%s, wait pm ind timeout\n", __func__);
 					timeouts++;
 				}
 			} else {

bes2600/main.c

@@ -790,6 +790,41 @@ void bes2600_core_release(struct bes2600_common *self)
 	return;
 }
 
+#if (GET_MAC_ADDR_METHOD == 2) || (GET_MAC_ADDR_METHOD == 3) /* To use macaddr and ps mode of customers */
+int access_file(char *path, char *buffer, int size, int isRead)
+{
+	int ret=0;
+	struct file *fp;
+	mm_segment_t old_fs = get_fs();
+
+	if(isRead)
+		fp = filp_open(path,O_RDONLY,S_IRUSR);
+	else
+		fp = filp_open(path,O_CREAT|O_WRONLY,S_IRUSR);
+
+	if (IS_ERR(fp)) {
+		bes_err("BES2600 : can't open %s\n", path);
+		return -1;
+	}
+
+	if (isRead) {
+			fp->f_pos = 0;
+			set_fs(KERNEL_DS);
+			ret = vfs_read(fp,buffer,size,&fp->f_pos);
+			set_fs(old_fs);
+	} else {
+			fp->f_pos = 0;
+			set_fs(KERNEL_DS);
+			ret = vfs_write(fp,buffer,size,&fp->f_pos);
+			set_fs(old_fs);
+	}
+	filp_close(fp,NULL);
+
+	bes_info("BES2600 : access_file return code(%d)\n", ret);
+	return ret;
+}
+#endif
+
 int bes2600_wifi_start(struct bes2600_common *hw_priv)
 {
 	int ret = 0, if_id;