bes2600: enable CONFIG_BES2600_TESTMODE by default + fix bit-rotted testmode plumbing

The driver implements a mac80211 testmode_cmd operation that dispatches
to a set of vendor commands (GET_TX_POWER_LEVEL, GET_TX_POWER_RANGE,
SET_SNAP_FRAME, TSM_STATS, GET_ROAM_DELAY, GET_STREAM, etc) plus the
BES2600 RF-test path (bes2600_vendor_rf_cmd → firmware
patch_wifi_testMode). The testmode handlers and the .testmode_cmd
binding in struct ieee80211_ops are conditionally compiled under
CONFIG_BES2600_TESTMODE, which previously defaulted to n.

Flip the Makefile default from n to y so wifi_testmode_cmd.o is
included in the build and the .testmode_cmd op is populated. On the
PineTab2 target kernel (linux-pinetab2 6.19.10-danctnix1, built with
CONFIG_NL80211_TESTMODE=y) this exposes the BES2600 RF-test surface
through the standard nl80211 testmode interface ('iw phy0 ...').

This also makes visible two classes of bit-rot that had accumulated
while nobody was building with CONFIG_BES2600_TESTMODE=y:

1. sta.c contains ~41 calls to bes2600_info() / bes2600_err() /
   bes2600_warn() / bes2600_dbg() / bes2600_err_with_cond() - a
   legacy log-macro family carrying a BES2600_DBG_* subsystem-id
   first argument. Neither the macros nor any of the BES2600_DBG_*
   constants are defined anywhere in the tree. The same call pattern
   appears under #if defined(BES2600_DETECTION_LOGIC) in hwio.c and
   under CONFIG_BES2600_ITP in itp.c, both normally disabled.

   Add minimal shim macros to bes_log.h that rewire the calls onto
   the existing bes_info() / bes_err() / bes_warn() / bes_devel()
   family (ignoring the subsystem id). Define BES2600_DBG_SBUS,
   BES2600_DBG_DOWNLOAD, BES2600_DBG_ITP and BES2600_DBG_TEST_MODE
   as 0 constants for documentation / grep.

2. bes2600_start_stop_tsm(), bes2600_get_tsm_params(), and
   bes2600_get_roam_delay() are declared in sta.c with external
   linkage but have no prototype in any header. All callers live in
   sta.c (inside bes2600_testmode_cmd). With CONFIG_BES2600_TESTMODE
   off the compiler never sees them; with it on gcc
   -Werror=missing-prototypes breaks the build.

   Mark the three functions static. (Keeping them file-local also
   matches their actual usage.)

Both changes are strictly scoped to make CONFIG_BES2600_TESTMODE=y
buildable; no behavioural change when the flag is off.

Tested-on: PineTab2 (BES2600WM + RK3566) running linux-pinetab2
6.19.10-danctnix1-1 with CONFIG_NL80211_TESTMODE=y. Module builds
cleanly, nl80211 testmode interface reachable via 'iw phy0 ...' from
userspace.

Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>

bes2600/Makefile

@@ -2,7 +2,7 @@ KERN_DIR = /lib/modules/$(KERNELRELEASE)/build
 # feature option
 BES2600                                 ?= m
 
-CONFIG_BES2600_TESTMODE                 ?= n
+CONFIG_BES2600_TESTMODE                 ?= y
 
 CONFIG_BES2600_ENABLE_DEVEL_LOGS        ?= n
 
@@ -66,7 +66,7 @@ BES2600_DRV_VERSION := bes2600_0.3.5_2024.0116
 ifeq ($(CONFIG_BES2600_CALIB_FROM_LINUX),y)
 FACTORY_CRC_CHECK                    ?= n
 STANDARD_FACTORY_EFUSE_FLAG          ?= y
-FACTORY_PATH                 ?= bes2600/bes2600_factory.txt
+FACTORY_PATH                 ?= /lib/firmware/bes2600_factory.txt
 endif
 
 # basic function

bes2600/bes2600_factory.c

@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/fs.h>
-#include <linux/firmware.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/crc32.h>
@@ -138,32 +137,38 @@ static int bes2600_factory_crc_check(struct factory_t *factory_data)
  */
 static int factory_section_read_file(char *path, void *buffer)
 {
-	const struct firmware *fw;
+	int ret = 0;
-	int ret;
+	struct file *fp;
 
 	if (!path || !buffer) {
 		bes_err("%s NULL pointer err\n", __func__);
 		return -1;
 	}
 
-	bes_devel("requesting firmware-class %s\n", path);
+	bes_devel("reading %s \n", path);
 
-	ret = request_firmware(&fw, path, NULL);
+	fp = filp_open(path, O_RDONLY, 0); //S_IRUSR
-	if (ret) {
+	if (IS_ERR(fp)) {
-		bes_devel("BES2600: request_firmware(%s) failed: %d\n", path, ret);
+		bes_devel("BES2600 : can't open %s\n",path);
 		return -1;
 	}
 
-	if (fw->size == 0 || fw->size > FACTORY_MAX_SIZE) {
+	if (fp->f_inode->i_size <= 0 || fp->f_inode->i_size > FACTORY_MAX_SIZE) {
-		bes_err("bes2600_factory.txt size check failed, read_size: %zu max_size: %d\n",
+		bes_err(			"bes2600_factory.txt size check failed, read_size: %lld max_size: %d\n",
-			fw->size, FACTORY_MAX_SIZE);
+			fp->f_inode->i_size, FACTORY_MAX_SIZE);
-		release_firmware(fw);
+		filp_close(fp, NULL);
 		return -1;
 	}
 
-	memcpy(buffer, fw->data, fw->size);
+	ret = kernel_read(fp, buffer, fp->f_inode->i_size, &fp->f_pos);
-	ret = (int)fw->size;
+
-	release_firmware(fw);
+	filp_close(fp, NULL);
+
+	if (ret != fp->f_inode->i_size) {
+		bes_err("bes2600_factory.txt read fail\n");
+		ret = -1;
+	}
+
 	return ret;
 }
 

bes2600/bes_log.h

@@ -8,3 +8,26 @@ extern struct device *global_dev;
 #define bes_info(fmt, ...) dev_info(global_dev, fmt, ##__VA_ARGS__)
 #define bes_warn(fmt, ...) dev_warn(global_dev, fmt, ##__VA_ARGS__)
 #define bes_err(fmt, ...) dev_err(global_dev, fmt, ##__VA_ARGS__)
+
+/*
+ * Legacy debug-subsystem-tagged log macros. The per-subsystem filtering
+ * was never implemented in-tree; these shims let code paths gated by
+ * CONFIG_BES2600_TESTMODE / CONFIG_BES2600_ITP / BES2600_DETECTION_LOGIC
+ * build when their conditions are enabled. The first argument is
+ * currently unused; pick one of the BES2600_DBG_* constants below for
+ * documentation.
+ */
+#define BES2600_DBG_SBUS       0
+#define BES2600_DBG_DOWNLOAD   0
+#define BES2600_DBG_ITP        0
+#define BES2600_DBG_TEST_MODE  0
+
+#define bes2600_info(_dbg, fmt, ...) bes_info(fmt, ##__VA_ARGS__)
+#define bes2600_err(_dbg, fmt, ...) bes_err(fmt, ##__VA_ARGS__)
+#define bes2600_warn(_dbg, fmt, ...) bes_warn(fmt, ##__VA_ARGS__)
+#define bes2600_dbg(_dbg, fmt, ...) bes_devel(fmt, ##__VA_ARGS__)
+#define bes2600_err_with_cond(_cond, _dbg, fmt, ...)		\
+	do {							\
+		if (_cond)					\
+			bes_err(fmt, ##__VA_ARGS__);		\
+	} while (0)

bes2600/sta.c

@@ -3633,7 +3633,7 @@ static int bes2600_set_power_save(struct ieee80211_hw *hw,
  *
  * Returns: 0 on success or non zero value on failure
  */
-int bes2600_start_stop_tsm(struct ieee80211_hw *hw, void *data)
+static int bes2600_start_stop_tsm(struct ieee80211_hw *hw, void *data)
 {
 	struct bes_msg_start_stop_tsm *start_stop_tsm =
 		(struct bes_msg_start_stop_tsm *) data;
@@ -3663,7 +3663,7 @@ int bes2600_start_stop_tsm(struct ieee80211_hw *hw, void *data)
  *
  * Returns: TSM parameters collected
  */
-int bes2600_get_tsm_params(struct ieee80211_hw *hw)
+static int bes2600_get_tsm_params(struct ieee80211_hw *hw)
 {
 	struct bes2600_common *hw_priv = hw->priv;
 	struct bes_tsm_stats tsm_stats;
@@ -3703,7 +3703,7 @@ int bes2600_get_tsm_params(struct ieee80211_hw *hw)
  *
  * Returns: Returns the last measured roam delay
  */
-int bes2600_get_roam_delay(struct ieee80211_hw *hw)
+static int bes2600_get_roam_delay(struct ieee80211_hw *hw)
 {
 	struct bes2600_common *hw_priv = hw->priv;
 	u16 roam_delay = hw_priv->tsm_info.roam_delay / 1000;