Compare commits

..

1 Commits

Author SHA1 Message Date
claude-noether cdfdac987a bes2600: bus_reset on connection-loss storm to dodge assoc-comeback blackhole
When mac80211 declares connection loss against this AP (typically driven
by inactivity-deauth or beacon-loss), the userspace reauth that follows
sometimes enters a long blackhole: the AP responds to auth with success
but defers assoc with the 802.11v "assoc comeback" timer; ohm retries
faster than the comeback grants permission; the AP eventually fires an
unprotected deauth-reason-6 ("Class 2 frame received from non-
authenticated station"), and recovery only completes via cross-SSID or
cross-channel fallback. Receipts: ~86 s blackhole observed in the
phase-7 rep on 2026-05-07 02:42, with three subsequent BSSIDs returning
assoc comeback timeouts before reason-9 (STA_REQ_ASSOC_WITHOUT_AUTH)
fired. Documented in marfrit/besser:notes/phase4-2026-05-07.md.

When N=3 driver-side connection_loss decisions fire within a 60 s window
on the same vif, skip the ieee80211_connection_loss() path and trigger
the c5.2-introduced bes2600_chrdev_do_bus_reset() instead. The bus
reset removes and re-probes the chip; userspace re-associates with a
fresh chip state, dodging the AP's comeback-timer rejection cycle.

Predicted Phase 7 delta vs current baseline:
- api_connection_loss rate: unchanged (we don't address the trigger)
- conditional probability of >5 s blackhole given event: <= 30 %
- worst-case recovery: 86 s -> < 10 s

Contract pin: bes2600_chrdev_do_bus_reset(sbus_ops, sbus_priv) at
bes2600/bes_chardev.c:455, introduced by c5.2. The function is async-
returning: sbus_ops->bus_reset() schedules an SDIO rescan; the helper
waits up to 3 s for the remove() callback to clear sbus_priv, then
returns. Per-vif state is gone after this point, so the recover work
lives on bes2600_common (hw_priv) and uses the global bes2600_cdev for
the bus_reset call rather than dereferencing per-vif state.

Threshold (3 / 60 s) is well above the steady-state per-vif
connection_loss rate observed in the patch-A phase-7 rep (0.86/h under
sustained load), so a true storm is required to trip it.

Files touched:
- bes2600/bes2600.h: 3 counter fields on struct bes2600_vif, 1
  work_struct on struct bes2600_common, 3 prototypes
- bes2600/sta.c: 3 helpers + storm-account hook in
  bes2600_connection_loss_work + storm-init in bes2600_vif_setup +
  cancel_work_sync in the hw_priv shutdown path; #include bes_chardev.h
  was already pulled in by an earlier c-stack patch
- bes2600/main.c: INIT_WORK alongside other hw_priv work_structs
- bes2600/debug.c: ConnectionLossStormRecoveries seq_printf in the
  per-vif status seq_file output

The cw1200/cw1260 ancestor has no equivalent; this is a clean
addition. checkpatch.pl --no-tree --strict: clean (0/0/0).

Signed-off-by: Claude (noether) <claude@reauktion.de>
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-07 11:30:09 +02:00
48 changed files with 448 additions and 621 deletions
+8 -16
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* AP mode for BES2600 mac80211 driver
* mac80211 STA and AP API for mac80211 BES2600 drivers
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "bes2600.h"
@@ -62,11 +65,8 @@ int bes2600_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct bes2600_vif *priv = cw12xx_get_vif_from_ieee80211(vif);
struct bes2600_link_entry *entry;
struct sk_buff *skb;
struct sk_buff_head local_drain;
struct bes2600_common *hw_priv = hw->priv;
__skb_queue_head_init(&local_drain);
#ifdef P2P_MULTIVIF
WARN_ON(priv->if_id == CW12XX_GENERIC_IF_ID);
#endif
@@ -95,17 +95,9 @@ int bes2600_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK)
priv->sta_asleep_mask |= BIT(sta_priv->link_id);
entry->status = BES2600_LINK_HARD;
/*
* Patch C2: splice the rx_queue out under the lock then deliver
* after unlock. ieee80211_rx_ni() runs the mac80211 RX path
* synchronously (formerly ieee80211_rx_irqsafe deferred to a
* tasklet); calling it from inside spin_lock_bh would hold the
* lock across mac80211's full RX dispatch.
*/
skb_queue_splice_init(&entry->rx_queue, &local_drain);
while ((skb = skb_dequeue(&entry->rx_queue)))
ieee80211_rx_irqsafe(priv->hw, skb);
spin_unlock_bh(&priv->ps_state_lock);
while ((skb = __skb_dequeue(&local_drain)))
ieee80211_rx_ni(priv->hw, skb);
#ifdef AP_AGGREGATE_FW_FIX
hw_priv->connected_sta_cnt++;
if(hw_priv->connected_sta_cnt>1) {
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* AP mode interface for BES2600 mac80211 driver
* mac80211 STA and AP API for mac80211 BES2600 drivers
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/version.h>
#ifndef AP_H_INCLUDED
+16 -21
View File
@@ -1,15 +1,18 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Common private data for BES2600 mac80211 driver
* Common private data for BES2600 drivers
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* Based on the mac80211 Prism54 code, which is
* Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
*
* Based on the islsm (softmac prism54) driver, which is
* Based on the islsm (softmac prism54) driver, which is:
* Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_H
@@ -353,23 +356,15 @@ struct bes2600_common {
* Keeping in common structure for the time being. Will be moved to VIFF
* after the mechanism is clear */
u8 ba_tid_mask;
/*
* Patch D: ba_lock removed. Per-frame TX/RX hot-path bumped these
* counters under spin_lock_bh; the lock did not protect any
* compound invariant that atomic ops can't satisfy. Counters are
* now atomic_t; ba_armed gates the once-per-window mod_timer
* arm via cmpxchg so concurrent TX/RX at a fresh window each
* try to claim the arm and exactly one succeeds.
*/
atomic_t ba_acc;
atomic_t ba_cnt;
atomic_t ba_cnt_rx;
atomic_t ba_acc_rx;
atomic_t ba_armed;
int ba_hist;
struct timer_list ba_timer;
atomic_t ba_ena;
struct work_struct ba_work;
int ba_acc; /*TODO: Same as above */
int ba_cnt; /*TODO: Same as above */
int ba_cnt_rx; /*TODO: Same as above */
int ba_acc_rx; /*TODO: Same as above */
int ba_hist; /*TODO: Same as above */
struct timer_list ba_timer;/*TODO: Same as above */
spinlock_t ba_lock; /*TODO: Same as above */
bool ba_ena; /*TODO: Same as above */
struct work_struct ba_work; /*TODO: Same as above */
bool is_BT_Present;
bool is_go_thru_go_neg;
u8 conf_listen_interval;
+6 -3
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Factory calibration loader for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Factory calibration loader interface
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __FACTORY_H__
#define __FACTORY_H__
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Platform data for BES2600 SDIO bus
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_PLAT_H_INCLUDED
#define BES2600_PLAT_H_INCLUDED
+66 -91
View File
@@ -1,13 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* SDIO bus glue for BES2600 mac80211 driver
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Derived from drivers/net/wireless/st/cw1200/cw1200_sdio.c
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
* Mac80211 SDIO driver for BES2600 device
*
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define DEBUG 1
#include <linux/version.h>
@@ -30,7 +29,6 @@
#include <linux/of_gpio.h>
#include "bes2600.h"
#include "bh.h"
#include "sbus.h"
#include "bes2600_plat.h"
#include "bes2600_factory.h"
@@ -74,12 +72,10 @@ struct sbus_priv {
int rx_data_toggle;
#endif
#ifdef BES_SDIO_RX_MULTIPLE_ENABLE
/*
* Patch C v3: rx_queue, rx_queue_lock, rx_work removed (no relay).
* The bh thread now reads RX inline; the rx_buffer scratch area
* stays. Counters/timestamps stay for debugfs visibility.
*/
spinlock_t rx_queue_lock;
struct sk_buff_head rx_queue;
u8 *rx_buffer;
struct work_struct rx_work;
u32 rx_last_ctrl;
u32 rx_valid_ctrl;
u32 rx_total_ctrl_cnt;
@@ -416,19 +412,10 @@ static void bes2600_sdio_irq_handler(struct sdio_func *func)
bes_devel("%s called, fw_started:%d \n",
__func__, self->fw_started);
/*
* Patch C v3: no more sdio_rx_work relay. Wake the bh thread
* directly via self->irq_handler (bes2600_irq_handler in bh.c
* which bumps bh_rx atomic + wakes bh_wq). The bh thread will
* then call sbus_ops->bus_rx_batch() to do the SDIO read inline.
* Matches cw1200 mainline IRQ → bh-direct architecture.
*/
if (likely(self->fw_started && self->core && self->irq_handler)) {
spin_lock_irqsave(&self->lock, flags);
self->irq_handler(self->irq_priv);
spin_unlock_irqrestore(&self->lock, flags);
if (likely(self->fw_started && self->core)) {
queue_work(self->sdio_wq, &self->rx_work);
self->last_irq_timestamp = jiffies;
} else if (self->irq_handler) {
} else if(self->irq_handler) {
spin_lock_irqsave(&self->lock, flags);
self->irq_handler(self->irq_priv);
spin_unlock_irqrestore(&self->lock, flags);
@@ -825,15 +812,10 @@ static int bes2600_sdio_extract_packets(struct sbus_priv *self, u32 ctrl_reg, u8
skb_put(skb, packet_len);
memcpy(skb->data, &data[pos], packet_len);
bes_devel("%s, %d,%d\n", __func__, packet_len, pos);
spin_lock(&self->rx_queue_lock);
skb_queue_tail(&self->rx_queue, skb);
self->rx_data_cnt++;
/*
* Patch C v3: deliver the SKB directly into the WSM/mac80211
* stack from the bh thread. No rx_queue, no inter-thread
* handoff, no atomic_t needed on the counters that
* wsm_release_tx_buffer touches — single-writer-from-bh is
* preserved by construction. See bh.c for the contract block.
*/
bes2600_bh_handle_rx_skb(self->core, skb);
spin_unlock(&self->rx_queue_lock);
packet_len = (packet_len + 3) & (~0x3);
pos += packet_len;
#ifdef BES_SDIO_OPTIMIZED_LEN
@@ -844,31 +826,17 @@ static int bes2600_sdio_extract_packets(struct sbus_priv *self, u32 ctrl_reg, u8
return 0;
}
/*
* Patch C v3: bh thread calls this directly via sbus_ops->bus_rx_batch.
* No more sdio_rx_work workqueue. SDIO read sequence (lock →
* read_ctrl → memcpy_fromio → packets_check → extract_packets) runs
* inline in bh-thread context. Each parsed SKB is delivered via
* bes2600_bh_handle_rx_skb() from extract_packets — no rx_queue, no
* second worker, no inter-thread handoff.
*
* Architecture matches cw1200 mainline. Single-writer-from-bh
* invariant on hw_bufs_used preserved by construction.
*
* Returns 0 on success (caller's bh outer loop decides whether to
* continue), negative on bus read error. On error: triggers
* wifi_force_close (same as the old sdio_rx_work).
*/
static int bes2600_sdio_read_rx_batch(struct sbus_priv *self)
static void sdio_rx_work(struct work_struct *work)
{
int ret = 0, again = 0, retry = 0, crc_retry = 0;
int ret, again = 0, retry = 0, crc_retry = 0;
u32 ctrl_reg = 0;
int total_len;
struct sbus_priv *self = container_of(work, struct sbus_priv, rx_work);
u8 *buf = self->rx_buffer;
/* don't read/write sdio when sdio error */
if (bes2600_chrdev_is_bus_error())
return 0;
return;
bes2600_gpio_wakeup_mcu(self, GPIO_WAKE_FLAG_SDIO_RX);
@@ -923,10 +891,6 @@ static int bes2600_sdio_read_rx_batch(struct sbus_priv *self)
goto failed;
}
/*
* extract_packets parses the multi-RX buffer and calls
* bes2600_bh_handle_rx_skb() per SKB. No queueing.
*/
if ((ret = bes2600_sdio_extract_packets(self, ctrl_reg, buf))) {
bes_err("%s,%d error=%d\n", __func__, __LINE__, ret);
goto failed;
@@ -934,16 +898,22 @@ static int bes2600_sdio_read_rx_batch(struct sbus_priv *self)
ctrl_reg = 0;
if (likely(self->irq_handler)) {
self->irq_handler(self->irq_priv);
} else {
bes_err("%s,%d\n", __func__, __LINE__);
goto failed;
}
} while (again);
bes2600_gpio_allow_mcu_sleep(self, GPIO_WAKE_FLAG_SDIO_RX);
return 0;
return;
failed:
bes2600_gpio_allow_mcu_sleep(self, GPIO_WAKE_FLAG_SDIO_RX);
bes2600_chrdev_wifi_force_close(self->core, false);
WARN_ON(1);
return -1;
}
static void sdio_scan_work(struct work_struct *work)
@@ -951,11 +921,26 @@ static void sdio_scan_work(struct work_struct *work)
bes_warn("%s: this function does nothing\n", __FUNCTION__);
}
/* Patch C v3: bes2600_sdio_pipe_read deleted. bh thread reads the
* SDIO bus inline via bes2600_sdio_read_rx_batch (sbus_ops->bus_rx_batch).
* No rx_queue, no skb_dequeue, no relay. bes2600_tx_loop_read remains
* for the test bus error-fallback path but is now invoked at higher
* level. */
static void *bes2600_sdio_pipe_read(struct sbus_priv *self)
{
struct sk_buff *skb;
if (bes2600_chrdev_is_bus_error()) {
return bes2600_tx_loop_read(self->core);
}
spin_lock(&self->rx_queue_lock);
skb = skb_dequeue(&self->rx_queue);
if (skb)
self->rx_proc_cnt++;
spin_unlock(&self->rx_queue_lock);
if (likely(self->fw_started == true &&
!bes2600_pwr_device_is_idle(self->core) &&
self->core->hw_bufs_used > 0))
if (!skb)
queue_work(self->sdio_wq, &self->rx_work);
return skb;
}
#endif
@@ -1211,14 +1196,7 @@ flush_previous:
}
} while (crc_retry <= 10);
sdio_release_host(self->func);
/*
* Patch C v3: wake the bh thread to check for any RX
* that piggybacked on this TX window. Bumps bh_rx
* atomic; bh's wait_event will pick it up and call
* sbus_ops->bus_rx_batch().
*/
if (likely(self->irq_handler))
self->irq_handler(self->irq_priv);
queue_work(self->sdio_wq, &self->rx_work);
if (ret) {
bes_err("%s,%d err=%d,%d,%d\n", __func__, __LINE__, ret, scatters, cur_blk);
sdio_work_debug(self);
@@ -1269,11 +1247,12 @@ static int bes2600_sdio_misc_init(struct sbus_priv *self, struct bes2600_common
self->next_toggle = 0;
#endif
#ifdef BES_SDIO_RX_MULTIPLE_ENABLE
/* Patch C v3: rx_queue / rx_queue_lock removed (no relay). */
spin_lock_init(&self->rx_queue_lock);
skb_queue_head_init(&self->rx_queue);
self->rx_buffer = (u8 *)__get_dma_pages(GFP_KERNEL, get_order(1632 * BES_SDIO_RX_MULTIPLE_NUM));
if (!self->rx_buffer)
return -ENOMEM;
/* Patch C v3: sdio_rx_work removed; bh thread does the read. */
INIT_WORK(&self->rx_work, sdio_rx_work);
#endif
#ifdef BES_SDIO_TX_MULTIPLE_ENABLE
INIT_LIST_HEAD(&self->tx_bufferlist);
@@ -1602,15 +1581,22 @@ err:
static void bes2600_sdio_empty_work(struct sbus_priv *self)
{
#ifdef BES_SDIO_RX_MULTIPLE_ENABLE
struct sk_buff *skb;
#endif
#ifdef BES_SDIO_TX_MULTIPLE_ENABLE
struct bes_sdio_tx_list_t *tx_buffer, *temp;
#endif
#ifdef BES_SDIO_RX_MULTIPLE_ENABLE
/*
* Patch C v3: rx_work and rx_queue removed. Counters still
* reset for the next attach cycle.
*/
cancel_work_sync(&self->rx_work);
while (1) {
skb = skb_dequeue(&self->rx_queue);
if (skb)
dev_kfree_skb(skb);
else
break;
}
self->rx_last_ctrl = 0;
self->rx_total_ctrl_cnt = 0;
self->rx_continuous_ctrl_cnt = 0;
@@ -1878,8 +1864,7 @@ static struct sbus_ops bes2600_sdio_sbus_ops = {
.sbus_reg_write = bes2600_sdio_reg_write,
.init = bes2600_sdio_misc_init,
#ifdef BES_SDIO_RX_MULTIPLE_ENABLE
/* Patch C v3: .pipe_read removed; bus_rx_batch replaces it. */
.bus_rx_batch = bes2600_sdio_read_rx_batch,
.pipe_read = bes2600_sdio_pipe_read,
#endif
#ifdef BES_SDIO_TX_MULTIPLE_ENABLE
.pipe_send = bes2600_sdio_pipe_send,
@@ -1899,15 +1884,9 @@ static void bes2600_sdio_en_lp_cb(struct bes2600_common *hw_priv)
long unsigned int old_ts, new_ts;
struct sbus_priv *self = hw_priv->sbus_priv;
/*
* Patch C v3: rx_work removed. Wait for IRQ-timestamp activity
* to settle by polling self->last_irq_timestamp via msleep
* (best-effort). The caller already knows the bh thread will
* process pending bh_rx during its next wait_event round.
*/
do {
old_ts = self->last_irq_timestamp;
msleep(2);
flush_work(&self->rx_work);
new_ts = self->last_irq_timestamp;
} while(old_ts != new_ts);
}
@@ -2265,12 +2244,8 @@ static int bes2600_sdio_suspend_noirq(struct device *dev)
if (func->num > 1)
return 0;
/*
* Patch C v3: work_pending(&self->rx_work) check dropped (no
* relay). bh_rx atomic alone tells us whether the bh thread
* has un-processed RX events queued.
*/
if (self->core && atomic_read(&self->core->bh_rx)) {
if(self->core &&
(work_pending(&self->rx_work) || atomic_read(&self->core->bh_rx))) {
bes_devel("%s: Suspend interrupted.\n", __func__);
return -EAGAIN;
}
+6 -15
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Character device for BES2600 mac80211 driver
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include<linux/module.h>
#include <linux/init.h>
@@ -481,18 +484,6 @@ int bes2600_chrdev_do_bus_reset(const struct sbus_ops *sbus_ops, struct sbus_pri
return 0;
}
/*
* Trigger bes2600_chrdev_do_bus_reset() against the file-global
* bes2600_cdev. Used by host-side recovery paths outside this
* compilation unit (e.g. sta.c connection-loss-storm fast-recover) so
* those callers do not need to reach the static bes2600_cdev directly.
*/
int bes2600_chrdev_trigger_bus_reset(void)
{
return bes2600_chrdev_do_bus_reset(bes2600_cdev.sbus_ops,
bes2600_cdev.sbus_priv);
}
bool bes2600_chrdev_is_wifi_opened(void)
{
bool wifi_opened = false;
+6 -4
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Character device interface for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __BES_CHARDEV_H__
#define __BES_CHARDEV_H__
@@ -58,7 +61,6 @@ struct sbus_priv *bes2600_chrdev_get_sbus_priv_data(void);
int bes2600_chrdev_check_system_close(void);
int bes2600_chrdev_do_system_close(const struct sbus_ops *sbus_ops, struct sbus_priv *priv);
int bes2600_chrdev_do_bus_reset(const struct sbus_ops *sbus_ops, struct sbus_priv *priv);
int bes2600_chrdev_trigger_bus_reset(void);
void bes2600_chrdev_wakeup_bt(void);
void bes2600_chrdev_wifi_force_close(struct bes2600_common *hw_priv, bool halt_dev);
void bes2600_chrdev_usb_remove(struct bes2600_common *hw_priv);
+6 -3
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Firmware download for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "bes_fw_common.h"
#include "bes2600.h"
+6 -3
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Firmware download common code for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "bes_fw_common.h"
#include "bes_log.h"
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Firmware download common interface
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __BES_FW_COMMON_H__
#define __BES_FW_COMMON_H__
-7
View File
@@ -1,10 +1,3 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* printk wrappers for BES2600
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
*
*/
extern struct device *global_dev;
#ifdef CONFIG_BES2600_ENABLE_DEVEL_LOGS
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Vendor testmode messages for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES_NL80211_TESTMODE_MSG_H
+6 -3
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Chip-side power state machine for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/list.h>
#include <linux/pm.h>
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Chip-side power state machine interface
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __BES_PWR_H__
#define __BES_PWR_H__
+16 -137
View File
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Bottom-half thread for BES2600 mac80211 driver
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <net/mac80211.h>
#include <linux/kthread.h>
@@ -101,7 +101,7 @@ void bes2600_unregister_bh(struct bes2600_common *hw_priv)
coex_deinit_mode(hw_priv);
#endif
atomic_inc(&hw_priv->bh_term);
atomic_add(1, &hw_priv->bh_term);
wake_up(&hw_priv->bh_wq);
flush_workqueue(hw_priv->bh_workqueue);
@@ -590,7 +590,7 @@ static int bes2600_bh(void *arg)
bes_devel("[BH] Device resume.\n");
atomic_set(&hw_priv->bh_suspend, BES2600_BH_RESUMED);
wake_up(&hw_priv->bh_evt_wq);
atomic_inc(&hw_priv->bh_rx);
atomic_add(1, &hw_priv->bh_rx);
continue;
}
@@ -758,9 +758,9 @@ tx:
#if 0 /* count is not implemented */
if (ret > 1)
atomic_inc(&hw_priv->bh_tx);
atomic_add(1, &hw_priv->bh_tx);
#else
atomic_inc(&hw_priv->bh_tx);
atomic_add(1, &hw_priv->bh_tx);
#endif
#if defined(CONFIG_BES2600_NON_POWER_OF_TWO_BLOCKSIZES)
@@ -958,119 +958,6 @@ static void bes2600_bh_parse_wakeup_event(struct bes2600_common *hw_priv, struct
}
}
/*
* Direct-deliver an RX SKB into the WSM/mac80211 stack.
*
* Patch C v3 (no-relay architecture, matches cw1200): the bh thread
* calls bes2600_sdio_read_rx_batch which calls
* bes2600_sdio_extract_packets which calls THIS function per parsed
* SKB. No rx_queue, no sdio_rx_work, no inter-thread handoff.
*
* Single-writer-from-bh invariant on hw_priv->hw_bufs_used,
* hw_priv->hw_bufs_used_vif[] and hw_priv->wsm_tx_pending[] is
* preserved BY CONSTRUCTION there is now only one writer (the bh
* thread itself), same as cw1200's design. No atomic_t conversion
* needed.
*
* Contract:
* - process context, sleepable. wsm_handle_rx (wsm.c, EXPORT_SYMBOL)
* acquires wsm_cmd.lock and may sleep on wait_event_timeout.
* - caller holds no bes2600 spinlock. bes2600_sdio_unlock(self) is
* called inside read_rx_batch before extract_packets is invoked.
* - SKB ownership: function frees on every path (success + error).
* - No need to wake the bh thread on TX-confirm we ARE the bh
* thread; tx_burst is signalled by returning *tx_out = 1 to the
* caller (bh_rx_helper), which propagates it to bh's outer loop.
*/
int bes2600_bh_handle_rx_skb(struct bes2600_common *priv, struct sk_buff *skb)
{
struct wsm_hdr *wsm;
size_t wsm_len;
u16 wsm_id;
u8 wsm_seq;
int tx = 0;
u32 confirm_label = 0x0;
if (!skb)
return 0;
wsm = (struct wsm_hdr *)skb->data;
wsm_len = __le16_to_cpu(wsm->len);
if (WARN_ON(wsm_len > skb->len)) {
bes_err("wsm_len err %d %d\n", (int)wsm_len, (int)skb->len);
dev_kfree_skb(skb);
return -1;
}
if (priv->wsm_enable_wsm_dumps)
print_hex_dump(KERN_DEBUG, "<-- ", DUMP_PREFIX_NONE, 16, 1,
skb->data, wsm_len, false);
wsm_id = __le16_to_cpu(wsm->id) & 0xFFF;
wsm_seq = (__le16_to_cpu(wsm->id) >> 13) & 7;
bes_devel("bes2600_bh_handle_rx_skb wsm_id:0x%04x seq:%d\n",
wsm_id, wsm_seq);
skb_trim(skb, wsm_len);
if (wsm_id == 0x0800) {
wsm_handle_exception(priv,
&skb->data[sizeof(*wsm)],
wsm_len - sizeof(*wsm));
bes_err("wsm exception\n");
dev_kfree_skb(skb);
return -1;
} else if ((wsm_seq != priv->wsm_rx_seq[WSM_TXRX_SEQ_IDX(wsm_id)])) {
bes_err("seq error! %u. %u. 0x%x.", wsm_seq,
priv->wsm_rx_seq[WSM_TXRX_SEQ_IDX(wsm_id)], wsm_id);
dev_kfree_skb(skb);
return -1;
}
bes2600_bh_parse_wakeup_event(priv, skb);
priv->wsm_rx_seq[WSM_TXRX_SEQ_IDX(wsm_id)] = (wsm_seq + 1) & 7;
if (IS_DRIVER_TO_MCU_CMD(wsm_id))
confirm_label = __le32_to_cpu(((struct wsm_mcu_hdr *)wsm)->handle_label);
if (WSM_CONFIRM_CONDITION(wsm_id, confirm_label)) {
int rc = wsm_release_tx_buffer(priv, 1);
bes2600_bh_dec_pending_count(priv, WSM_TXRX_SEQ_IDX(wsm->id));
if (rc < 0) {
bes_err("wsm_release_tx_buffer failed: %d\n", rc);
dev_kfree_skb(skb);
return rc;
} else if (rc > 0) {
tx = 1;
}
}
/* wsm_handle_rx takes care of SKB lifetime: zeroes *skb_p if consumed. */
if (wsm_handle_rx(priv, wsm_id, wsm, &skb)) {
bes_err("wsm_handle_rx failed (id=0x%04x)\n", wsm_id);
if (skb)
dev_kfree_skb(skb);
return -1;
}
if (skb)
dev_kfree_skb(skb);
/*
* Signal "tx side has new headroom" via atomic so the bh outer
* loop's wait_event predicate notices on its next wait. No
* cross-thread wake needed because we are the bh thread; the
* outer loop will pick this up after read_rx_batch returns.
*/
if (tx)
atomic_inc(&priv->bh_tx);
return 0;
}
EXPORT_SYMBOL(bes2600_bh_handle_rx_skb);
static int bes2600_bh_rx_helper(struct bes2600_common *priv, int *tx)
{
struct sk_buff *skb = NULL;
@@ -1082,18 +969,10 @@ static int bes2600_bh_rx_helper(struct bes2600_common *priv, int *tx)
u32 confirm_label = 0x0; /* wsm to mcu cmd cnfirm label */
#if defined(BES_SDIO_RX_MULTIPLE_ENABLE)
/*
* Patch C v3: the bh thread does the SDIO read inline via
* sbus_ops->bus_rx_batch. bes2600_sdio_read_rx_batch reads the
* multi-RX coalesced frames out of the chip and delivers each
* one inline via bes2600_bh_handle_rx_skb (no rx_queue, no
* pipe_read, no inter-thread handoff). Return value: 0 on
* success (bh outer loop will check whether to continue),
* negative on read error.
*/
if (priv->sbus_ops->bus_rx_batch)
return priv->sbus_ops->bus_rx_batch(priv->sbus_priv);
return 0;
skb = (struct sk_buff *)priv->sbus_ops->pipe_read(priv->sbus_priv);
if (!skb)
return 0;
rx = 1; // always consider rx pipe not empty
#else
u32 ctrl_reg = 0;
size_t read_len = 0;
@@ -1255,7 +1134,7 @@ static int bes2600_bh_tx_helper(struct bes2600_common *hw_priv,
tx_len += 4;
#endif
atomic_inc(&hw_priv->bh_tx);
atomic_add(1, &hw_priv->bh_tx);
tx_len = hw_priv->sbus_ops->align_size(
hw_priv->sbus_priv, tx_len);
@@ -1556,7 +1435,7 @@ static int bes2600_bh(void *arg)
bes_devel("[BH] Device resume.\n");
atomic_set(&hw_priv->bh_suspend, BES2600_BH_RESUMED);
wake_up(&hw_priv->bh_evt_wq);
atomic_inc(&hw_priv->bh_rx);
atomic_add(1, &hw_priv->bh_rx);
goto done;
}
+6 -15
View File
@@ -1,12 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Bottom-half thread interface for BES2600 mac80211 driver
* Device handling thread interface for mac80211 BES2600 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_BH_H
@@ -39,15 +39,6 @@ int wsm_release_vif_tx_buffer(struct bes2600_common *hw_priv, int if_id,
int bes2600_bh_sw_process(struct bes2600_common *hw_priv,
struct wsm_tx_confirm *tx_confirm);
/*
* Direct-deliver an RX SKB into the WSM/mac80211 stack from the bh thread.
* Called by bes2600_sdio_extract_packets per RX frame, no queueing.
* Process context, sleepable, caller holds no bes2600 spinlock.
* Function frees skb on every path. See bh.c for full contract.
*/
int bes2600_bh_handle_rx_skb(struct bes2600_common *hw_priv,
struct sk_buff *skb);
void bes2600_bh_inc_pending_count(struct bes2600_common *hw_priv, int idx);
void bes2600_bh_dec_pending_count(struct bes2600_common *hw_priv, int idx);
+11 -14
View File
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Debugging interface for BES2600 mac80211 driver
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
@@ -110,20 +110,17 @@ static int bes2600_status_show_common(struct seq_file *seq, void *v)
int ba_cnt, ba_acc, ba_cnt_rx, ba_acc_rx, ba_avg = 0, ba_avg_rx = 0;
bool ba_ena;
/*
* Patch D: ba_lock removed. hw_priv->debug->ba_* are written only
* by the timer callback (single writer); reading without a lock is
* fine for stats. ba_ena is atomic_t.
*/
ba_cnt = hw_priv->debug->ba_cnt;
ba_acc = hw_priv->debug->ba_acc;
spin_lock_bh(&hw_priv->ba_lock);
ba_cnt = hw_priv->debug->ba_cnt;
ba_acc = hw_priv->debug->ba_acc;
ba_cnt_rx = hw_priv->debug->ba_cnt_rx;
ba_acc_rx = hw_priv->debug->ba_acc_rx;
ba_ena = !!atomic_read(&hw_priv->ba_ena);
ba_ena = hw_priv->ba_ena;
if (ba_cnt)
ba_avg = ba_acc / ba_cnt;
if (ba_cnt_rx)
ba_avg_rx = ba_acc_rx / ba_cnt_rx;
spin_unlock_bh(&hw_priv->ba_lock);
seq_puts(seq, "BES2600 Wireless LAN driver status\n");
seq_printf(seq, "Hardware: %d.%d\n",
+6 -6
View File
@@ -1,12 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Debugging interface for BES2600 mac80211 driver
* DebugFS code for BES2600 mac80211 driver
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2011, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_DEBUG_H_INCLUDED
+6 -3
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* BT/WiFi coexistence (ePTA) for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/version.h>
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* BT/WiFi coexistence interface for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __EPTA_COEX_H__
#define __EPTA_COEX_H__
+6 -3
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* BT/WiFi coexistence request handling
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/kernel.h>
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* BT/WiFi coexistence request interface
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef EPTA_REQUEST_H
#define EPTA_REQUEST_H
+6 -6
View File
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Firmware I/O for BES2600 mac80211 driver
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
+6 -6
View File
@@ -1,12 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Firmware I/O interface for BES2600 mac80211 driver
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef FWIO_H_INCLUDED
#define FWIO_H_INCLUDED
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* HT capability config for BES2600
* HT-related code for BES2600 driver
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_HT_H_INCLUDED
+6 -6
View File
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Low-level device I/O for BES2600 mac80211 driver
* Low-level device IO routines for BES2600 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
+10 -5
View File
@@ -1,12 +1,17 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Low-level device I/O interface for BES2600 mac80211 driver
* Low-level API for mac80211 BES2600 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
* Copyright (c) 2010, Bestechnic
* Author:
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Based on:
* UMAC BES2600 driver which is
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_HWIO_H_INCLUDED
+8 -4
View File
@@ -1,9 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* ITP (in-band test mode) for BES2600
* mac80211 glue code for mac80211 BES2600 drivers
* ITP code
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
@@ -566,7 +570,7 @@ int bes2600_itp_get_tx(struct bes2600_common *priv, u8 **data,
*burst = 2;
atomic_set(&priv->bh_tx, 1);
ktime_get_ts(&itp->last_sent);
atomic_inc(&itp->awaiting_confirm);
atomic_add(1, &itp->awaiting_confirm);
spin_unlock_bh(&itp->tx_lock);
return 1;
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* ITP interface for BES2600
* ITP code for BES2600 mac80211 driver
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2011, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_ITP_H_INCLUDED
+7 -15
View File
@@ -1,18 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Main entry/init for BES2600 mac80211 driver
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
*
* Based on the mac80211 Prism54 code, which is
* Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
*
* Based on the islsm (softmac prism54) driver, which is
* Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
@@ -496,14 +490,13 @@ static struct ieee80211_hw *bes2600_init_common(size_t hw_priv_data_len)
INIT_LIST_HEAD(&hw_priv->event_queue);
INIT_WORK(&hw_priv->event_handler, bes2600_event_handler);
INIT_WORK(&hw_priv->ba_work, bes2600_ba_work);
/* Patch D: ba_lock removed; ba_acc/ba_cnt/etc are atomic_t. */
spin_lock_init(&hw_priv->ba_lock);
timer_setup(&hw_priv->ba_timer, bes2600_ba_timer, 0);
if (unlikely(bes2600_queue_stats_init(&hw_priv->tx_queue_stats,
WLAN_LINK_ID_MAX,
bes2600_skb_dtor,
hw_priv))) {
destroy_workqueue(hw_priv->workqueue);
ieee80211_free_hw(hw);
return NULL;
}
@@ -515,7 +508,6 @@ static struct ieee80211_hw *bes2600_init_common(size_t hw_priv_data_len)
for (; i > 0; i--)
bes2600_queue_deinit(&hw_priv->tx_queue[i - 1]);
bes2600_queue_stats_deinit(&hw_priv->tx_queue_stats);
destroy_workqueue(hw_priv->workqueue);
ieee80211_free_hw(hw);
return NULL;
}
+6 -6
View File
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Power management for BES2600 mac80211 driver
* Mac80211 power management API for BES2600 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2011, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
+6 -6
View File
@@ -1,12 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Power management interface for BES2600 mac80211 driver
* Mac80211 power management interface for BES2600 mac80211 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2011, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef PM_H_INCLUDED
+6 -6
View File
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* O(1) TX queue for BES2600 mac80211 driver
* O(1) TX queue with built-in allocator for BES2600 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <net/mac80211.h>
+6 -6
View File
@@ -1,12 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* O(1) TX queue interface for BES2600 mac80211 driver
* O(1) TX queue with built-in allocator for BES2600 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_QUEUE_H_INCLUDED
+6 -14
View File
@@ -1,12 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Bus abstraction interface for BES2600
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Replaces hwbus.h from drivers/net/wireless/st/cw1200/
* Copyright (c) 2010, ST-Ericsson
* Common sbus abstraction layer interface for bes2600 wireless driver
*
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_SBUS_H
@@ -83,14 +83,6 @@ struct sbus_ops {
* Returns 0 on success or a negative errno.
*/
int (*bus_reset)(struct sbus_priv *self);
/*
* Read a batch of RX frames inline from the bus and deliver each
* one via bes2600_bh_handle_rx_skb(). Called from the bh thread
* (process context, sleepable). Replaces the
* sdio_rx_work + rx_queue + pipe_read relay (Patch C v3, 2026).
* Returns 0 on success, negative on read error.
*/
int (*bus_rx_batch)(struct sbus_priv *self);
};
void bes2600_irq_handler(struct bes2600_common *priv);
+22 -29
View File
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Scan implementation for BES2600 mac80211 driver
* Scan implementation for BES2600 mac80211 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
@@ -257,21 +257,18 @@ int bes2600_hw_scan(struct ieee80211_hw *hw,
bes2600_pwr_set_busy_event(hw_priv, BES_PWR_LOCK_ON_SCAN);
/* will be unlocked in bes2600_scan_work() */
down(&hw_priv->scan.lock);
down(&hw_priv->conf_lock);
frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
req->ie_len);
if (!frame.skb) {
up(&hw_priv->conf_lock);
up(&hw_priv->scan.lock);
if (!frame.skb)
return -ENOMEM;
}
if (req->ie_len)
skb_put_data(frame.skb, req->ie, req->ie_len);
/* will be unlocked in bes2600_scan_work() */
down(&hw_priv->scan.lock);
down(&hw_priv->conf_lock);
if (frame.skb) {
int ret;
//if (priv->if_id == 0)
@@ -289,9 +286,9 @@ int bes2600_hw_scan(struct ieee80211_hw *hw,
}
#endif
if (ret) {
dev_kfree_skb(frame.skb);
up(&hw_priv->conf_lock);
up(&hw_priv->scan.lock);
dev_kfree_skb(frame.skb);
return ret;
}
}
@@ -321,10 +318,10 @@ int bes2600_hw_scan(struct ieee80211_hw *hw,
++hw_priv->scan.n_ssids;
}
up(&hw_priv->conf_lock);
if (frame.skb)
dev_kfree_skb(frame.skb);
up(&hw_priv->conf_lock);
#ifdef WIFI_BT_COEXIST_EPTA_ENABLE
bwifi_change_current_status(hw_priv, BWIFI_STATUS_SCANNING);
#endif
@@ -365,18 +362,14 @@ int bes2600_hw_sched_scan_start(struct ieee80211_hw *hw,
if (req->n_ssids > hw->wiphy->max_scan_ssids)
return -EINVAL;
frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
req->ie_len);
if (!frame.skb)
return -ENOMEM;
/* will be unlocked in bes2600_scan_work() */
down(&hw_priv->scan.lock);
down(&hw_priv->conf_lock);
frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
req->ie_len);
if (!frame.skb) {
up(&hw_priv->conf_lock);
up(&hw_priv->scan.lock);
return -ENOMEM;
}
if (frame.skb) {
int ret;
if (priv->if_id == 0)
@@ -387,9 +380,9 @@ int bes2600_hw_sched_scan_start(struct ieee80211_hw *hw,
ret = wsm_set_probe_responder(priv, true);
}
if (ret) {
dev_kfree_skb(frame.skb);
up(&hw_priv->conf_lock);
up(&hw_priv->scan.lock);
dev_kfree_skb(frame.skb);
return ret;
}
}
@@ -421,10 +414,10 @@ int bes2600_hw_sched_scan_start(struct ieee80211_hw *hw,
}
}
up(&hw_priv->conf_lock);
if (frame.skb)
dev_kfree_skb(frame.skb);
up(&hw_priv->conf_lock);
queue_work(hw_priv->workqueue, &hw_priv->scan.swork);
wiphy_warn(hw->wiphy, "<--[SCAN] Scheduled scan request.\n");
return 0;
+6 -6
View File
@@ -1,12 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Scan interface for BES2600 mac80211 driver
* Scan interface for BES2600 mac80211 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef SCAN_H_INCLUDED
+39 -54
View File
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Mac80211 STA API for BES2600 mac80211 driver
* Mac80211 STA API for BES2600 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/vmalloc.h>
@@ -1484,7 +1484,7 @@ void bes2600_event_handler(struct work_struct *work)
IEEE80211_STYPE_DEAUTH | IEEE80211_FCTL_TODS);
deauth->u.deauth.reason_code = WLAN_REASON_DEAUTH_LEAVING;
deauth->seq_ctrl = 0;
ieee80211_rx_ni(priv->hw, skb);
ieee80211_rx_irqsafe(priv->hw, skb);
bes_devel(" Inactivity Deauth Frame sent for MAC SA %pM \t and DA %pM\n", deauth->sa, deauth->da);
queue_work(priv->hw_priv->workqueue, &priv->set_tim_work);
break;
@@ -1692,7 +1692,7 @@ report:
void bes2600_connection_loss_storm_recover(struct work_struct *work)
{
bes_warn("[bes2600] connection-loss-storm fast-recover: bus_reset\n");
bes2600_chrdev_trigger_bus_reset();
bes2600_chrdev_do_bus_reset(bes2600_cdev.sbus_ops, bes2600_cdev.sbus_priv);
/*
* After bes2600_chrdev_do_bus_reset() returns, the SDIO core has
* scheduled a remove + rescan; per-vif state may already be gone.
@@ -2342,19 +2342,14 @@ void bes2600_join_work(struct work_struct *work)
//WARN_ON(wsm_reset(hw_priv, &reset, priv->if_id));
WARN_ON(wsm_set_block_ack_policy(hw_priv,
0, hw_priv->ba_tid_mask, priv->if_id));
/*
* Patch D: ba_lock removed. Disconnect-reset clears the
* counters and the arm flag; producers racing here cannot
* cause harm at worst they re-arm the timer and bump
* counters that will be cleared on the next timer tick.
*/
atomic_set(&hw_priv->ba_ena, 0);
atomic_set(&hw_priv->ba_cnt, 0);
atomic_set(&hw_priv->ba_acc, 0);
spin_lock_bh(&hw_priv->ba_lock);
hw_priv->ba_ena = false;
hw_priv->ba_cnt = 0;
hw_priv->ba_acc = 0;
hw_priv->ba_hist = 0;
atomic_set(&hw_priv->ba_cnt_rx, 0);
atomic_set(&hw_priv->ba_acc_rx, 0);
atomic_set(&hw_priv->ba_armed, 0);
hw_priv->ba_cnt_rx = 0;
hw_priv->ba_acc_rx = 0;
spin_unlock_bh(&hw_priv->ba_lock);
mgmt_policy.protectedMgmtEnable = 0;
mgmt_policy.unprotectedMgmtFramesAllowed = 1;
@@ -2634,11 +2629,10 @@ void bes2600_ba_work(struct work_struct *work)
return;*/
bes_devel("BA work****\n");
/*
* Patch D: ba_lock removed. ba_tid_mask is u8 set once at init
* (main.c); reading it without a lock is fine.
*/
spin_lock_bh(&hw_priv->ba_lock);
// tx_ba_tid_mask = hw_priv->ba_ena ? hw_priv->ba_tid_mask : 0;
tx_ba_tid_mask = hw_priv->ba_tid_mask;
spin_unlock_bh(&hw_priv->ba_lock);
wsm_lock_tx(hw_priv);
@@ -2651,49 +2645,37 @@ void bes2600_ba_work(struct work_struct *work)
void bes2600_ba_timer(struct timer_list *t)
{
bool ba_ena;
int cnt, acc, cnt_rx, acc_rx;
struct bes2600_common *hw_priv = from_timer(hw_priv, t, ba_timer);
/*
* Patch D: ba_lock removed. Snapshot atomic counters into locals
* for the predicate evaluation; producers may race incrementing
* after the snapshot but the resulting decision is approximate
* which the policy already tolerates (next timer tick re-evaluates).
*/
cnt = atomic_read(&hw_priv->ba_cnt);
acc = atomic_read(&hw_priv->ba_acc);
cnt_rx = atomic_read(&hw_priv->ba_cnt_rx);
acc_rx = atomic_read(&hw_priv->ba_acc_rx);
bes2600_debug_ba(hw_priv, cnt, acc, cnt_rx, acc_rx);
spin_lock_bh(&hw_priv->ba_lock);
bes2600_debug_ba(hw_priv, hw_priv->ba_cnt, hw_priv->ba_acc,
hw_priv->ba_cnt_rx, hw_priv->ba_acc_rx);
if (atomic_read(&hw_priv->scan.in_progress)) {
atomic_set(&hw_priv->ba_cnt, 0);
atomic_set(&hw_priv->ba_acc, 0);
atomic_set(&hw_priv->ba_cnt_rx, 0);
atomic_set(&hw_priv->ba_acc_rx, 0);
atomic_set(&hw_priv->ba_armed, 0);
return;
hw_priv->ba_cnt = 0;
hw_priv->ba_acc = 0;
hw_priv->ba_cnt_rx = 0;
hw_priv->ba_acc_rx = 0;
goto skip_statistic_update;
}
if (cnt >= BES2600_BLOCK_ACK_CNT &&
(acc / cnt >= BES2600_BLOCK_ACK_THLD ||
(cnt_rx >= BES2600_BLOCK_ACK_CNT &&
acc_rx / cnt_rx >=
if (hw_priv->ba_cnt >= BES2600_BLOCK_ACK_CNT &&
(hw_priv->ba_acc / hw_priv->ba_cnt >= BES2600_BLOCK_ACK_THLD ||
(hw_priv->ba_cnt_rx >= BES2600_BLOCK_ACK_CNT &&
hw_priv->ba_acc_rx / hw_priv->ba_cnt_rx >=
BES2600_BLOCK_ACK_THLD)))
ba_ena = true;
else
ba_ena = false;
atomic_set(&hw_priv->ba_cnt, 0);
atomic_set(&hw_priv->ba_acc, 0);
atomic_set(&hw_priv->ba_cnt_rx, 0);
atomic_set(&hw_priv->ba_acc_rx, 0);
atomic_set(&hw_priv->ba_armed, 0);
hw_priv->ba_cnt = 0;
hw_priv->ba_acc = 0;
hw_priv->ba_cnt_rx = 0;
hw_priv->ba_acc_rx = 0;
if (ba_ena != !!atomic_read(&hw_priv->ba_ena)) {
if (ba_ena != hw_priv->ba_ena) {
if (ba_ena || ++hw_priv->ba_hist >= BES2600_BLOCK_ACK_HIST) {
atomic_set(&hw_priv->ba_ena, ba_ena ? 1 : 0);
hw_priv->ba_ena = ba_ena;
hw_priv->ba_hist = 0;
#if 0
bes_devel("[STA] %s block ACK:\n",
@@ -2703,6 +2685,9 @@ void bes2600_ba_timer(struct timer_list *t)
}
} else if (hw_priv->ba_hist)
--hw_priv->ba_hist;
skip_statistic_update:
spin_unlock_bh(&hw_priv->ba_lock);
}
int bes2600_vif_setup(struct bes2600_vif *priv)
+6 -6
View File
@@ -1,12 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Mac80211 STA API interface for BES2600 mac80211 driver
* Mac80211 STA interface for BES2600 mac80211 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/version.h>
#ifndef STA_H_INCLUDED
+6 -3
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Test-mode TX loopback for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "bes2600.h"
#include "wsm.h"
+6 -3
View File
@@ -1,9 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Test-mode TX loopback interface for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __TX_LOOP_H__
#define __TX_LOOP_H__
+24 -45
View File
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Datapath implementation for BES2600 mac80211 driver
* Datapath implementation for BES2600 mac80211 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <net/mac80211.h>
@@ -995,18 +995,14 @@ bes2600_tx_h_ba_stat(struct bes2600_vif *priv,
if (!ieee80211_is_data(t->hdr->frame_control))
return;
/*
* Patch D: lock-free hot-path BA accounting. atomic_inc + atomic_add
* each per-frame; the once-per-window timer-arm uses cmpxchg on
* ba_armed so concurrent TX/RX can't both try to set the timer and
* we don't need cross-counter coherency on the ba_cnt/ba_cnt_rx pair.
*/
atomic_add(t->skb->len - t->hdrlen, &hw_priv->ba_acc);
atomic_inc(&hw_priv->ba_cnt);
if (atomic_cmpxchg(&hw_priv->ba_armed, 0, 1) == 0) {
spin_lock_bh(&hw_priv->ba_lock);
hw_priv->ba_acc += t->skb->len - t->hdrlen;
if (!(hw_priv->ba_cnt_rx || hw_priv->ba_cnt)) {
mod_timer(&hw_priv->ba_timer,
jiffies + BES2600_BLOCK_ACK_INTERVAL);
}
hw_priv->ba_cnt++;
spin_unlock_bh(&hw_priv->ba_lock);
}
static int
@@ -1633,13 +1629,14 @@ bes2600_rx_h_ba_stat(struct bes2600_vif *priv,
if (!priv->setbssparams_done)
return;
/* Patch D: lock-free hot-path BA accounting; see TX side comment. */
atomic_add(skb_len - hdrlen, &hw_priv->ba_acc_rx);
atomic_inc(&hw_priv->ba_cnt_rx);
if (atomic_cmpxchg(&hw_priv->ba_armed, 0, 1) == 0) {
spin_lock_bh(&hw_priv->ba_lock);
hw_priv->ba_acc_rx += skb_len - hdrlen;
if (!(hw_priv->ba_cnt_rx || hw_priv->ba_cnt)) {
mod_timer(&hw_priv->ba_timer,
jiffies + BES2600_BLOCK_ACK_INTERVAL);
}
hw_priv->ba_cnt_rx++;
spin_unlock_bh(&hw_priv->ba_lock);
}
void bes2600_rx_cb(struct bes2600_vif *priv,
@@ -1942,33 +1939,15 @@ void bes2600_rx_cb(struct bes2600_vif *priv,
if (unlikely(bes2600_itp_rxed(hw_priv, skb)))
consume_skb(skb);
else if (unlikely(early_data)) {
/*
* Patch E: when c7 has latched pm_unsupported (firmware
* doesn't honour PSM, see feedback_bes2600_firmware_no_psm),
* AP-side power-save state machine is dead and link entries
* never transition to BES2600_LINK_SOFT. The double-check
* branch under ps_state_lock is unreachable in that case,
* so skip the per-frame lock acquisition entirely and
* deliver to mac80211 directly.
*
* On firmware that does honour PSM (the latch self-clears
* if a real PM_INDICATION ever arrives see c7), this
* predicate flips back to false and the original locked
* path is taken.
*/
if (hw_priv->bes_power.pm_unsupported) {
ieee80211_rx_ni(priv->hw, skb);
} else {
spin_lock_bh(&priv->ps_state_lock);
/* Double-check status with lock held */
if (entry->status == BES2600_LINK_SOFT)
skb_queue_tail(&entry->rx_queue, skb);
else
ieee80211_rx_ni(priv->hw, skb);
spin_unlock_bh(&priv->ps_state_lock);
}
spin_lock_bh(&priv->ps_state_lock);
/* Double-check status with lock held */
if (entry->status == BES2600_LINK_SOFT)
skb_queue_tail(&entry->rx_queue, skb);
else
ieee80211_rx_irqsafe(priv->hw, skb);
spin_unlock_bh(&priv->ps_state_lock);
} else {
ieee80211_rx_ni(priv->hw, skb);
ieee80211_rx_irqsafe(priv->hw, skb);
}
*skb_p = NULL;
+6 -6
View File
@@ -1,12 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Datapath interface for BES2600 mac80211 driver
* Datapath interface for BES2600 mac80211 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2010, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_TXRX_H
+6 -3
View File
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* WiFi testmode commands for BES2600
* Mac80211 driver for BES2600 device
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifdef CONFIG_BES2600_TESTMODE
#include <net/netlink.h>
+8 -7
View File
@@ -1,12 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* WSM host interface for BES2600 mac80211 driver
* WSM host interface (HI) implementation for
* BES2600 mac80211 drivers.
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Copyright (c) 2022, Bestechnic
* Author:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/skbuff.h>
@@ -2412,7 +2413,7 @@ int wsm_handle_rx(struct bes2600_common *hw_priv, int id,
if (!hw_priv->beacon_bkp)
hw_priv->beacon_bkp = \
skb_copy(hw_priv->beacon, GFP_ATOMIC);
ieee80211_rx_ni(hw_priv->hw, hw_priv->beacon);
ieee80211_rx_irqsafe(hw_priv->hw, hw_priv->beacon);
hw_priv->beacon = hw_priv->beacon_bkp;
hw_priv->beacon_bkp = NULL;
+9 -5
View File
@@ -1,12 +1,16 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* WSM host interface for BES2600 mac80211 driver
* WSM host interface (HI) interface for BES2600 mac80211 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
* Copyright (c) 2022, Bestechnic
* Author:
*
* Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
* Based on BES2600 UMAC WSM API, which is
* Copyright (C) SA 2010
* Author: Stewart Mathers <stewart.mathers@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef BES2600_WSM_H_INCLUDED