test0r
6f13e008d2
The driver implements a mac80211 testmode_cmd operation that dispatches
to a set of vendor commands (GET_TX_POWER_LEVEL, GET_TX_POWER_RANGE,
SET_SNAP_FRAME, TSM_STATS, GET_ROAM_DELAY, GET_STREAM, etc) plus the
BES2600 RF-test path (bes2600_vendor_rf_cmd → firmware
patch_wifi_testMode). The testmode handlers and the .testmode_cmd
binding in struct ieee80211_ops are conditionally compiled under
CONFIG_BES2600_TESTMODE, which previously defaulted to n.
Flip the Makefile default from n to y so wifi_testmode_cmd.o is
included in the build and the .testmode_cmd op is populated. On the
PineTab2 target kernel (linux-pinetab2 6.19.10-danctnix1, built with
CONFIG_NL80211_TESTMODE=y) this exposes the BES2600 RF-test surface
through the standard nl80211 testmode interface ('iw phy0 ...').
This also makes visible two classes of bit-rot that had accumulated
while nobody was building with CONFIG_BES2600_TESTMODE=y:
1. sta.c contains ~41 calls to bes2600_info() / bes2600_err() /
bes2600_warn() / bes2600_dbg() / bes2600_err_with_cond() - a
legacy log-macro family carrying a BES2600_DBG_* subsystem-id
first argument. Neither the macros nor any of the BES2600_DBG_*
constants are defined anywhere in the tree. The same call pattern
appears under #if defined(BES2600_DETECTION_LOGIC) in hwio.c and
under CONFIG_BES2600_ITP in itp.c, both normally disabled.
Add minimal shim macros to bes_log.h that rewire the calls onto
the existing bes_info() / bes_err() / bes_warn() / bes_devel()
family (ignoring the subsystem id). Define BES2600_DBG_SBUS,
BES2600_DBG_DOWNLOAD, BES2600_DBG_ITP and BES2600_DBG_TEST_MODE
as 0 constants for documentation / grep.
2. bes2600_start_stop_tsm(), bes2600_get_tsm_params(), and
bes2600_get_roam_delay() are declared in sta.c with external
linkage but have no prototype in any header. All callers live in
sta.c (inside bes2600_testmode_cmd). With CONFIG_BES2600_TESTMODE
off the compiler never sees them; with it on gcc
-Werror=missing-prototypes breaks the build.
Mark the three functions static. (Keeping them file-local also
matches their actual usage.)
Both changes are strictly scoped to make CONFIG_BES2600_TESTMODE=y
buildable; no behavioural change when the flag is off.
Tested-on: PineTab2 (BES2600WM + RK3566) running linux-pinetab2
6.19.10-danctnix1-1 with CONFIG_NL80211_TESTMODE=y. Module builds
cleanly, nl80211 testmode interface reachable via 'iw phy0 ...' from
userspace.
Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>
231 lines
7.5 KiB
Makefile
231 lines
7.5 KiB
Makefile
KERN_DIR = /lib/modules/$(KERNELRELEASE)/build
|
|
# feature option
|
|
BES2600 ?= m
|
|
|
|
CONFIG_BES2600_TESTMODE ?= y
|
|
|
|
CONFIG_BES2600_ENABLE_DEVEL_LOGS ?= n
|
|
|
|
CONFIG_BES2600_WAPI_SUPPORT ?= n
|
|
CONFIG_BES2600_STA_DEBUG ?= y
|
|
CONFIG_BES2600_STATIC_SDD ?= y
|
|
P2P_MULTIVIF ?= y
|
|
AP_AGGREGATE_FW_FIX ?= y
|
|
CONFIG_BES2600_BT ?= n
|
|
WIFI_BT_COEXIST_EPTA_ENABLE ?= y
|
|
WIFI_BT_COEXIST_EPTA_FDD ?= n
|
|
CONFIG_BES2600_WOWLAN ?= y
|
|
CONFIG_BES2600_LISTEN_INTERVAL ?= 3
|
|
BSS_LOSS_CHECK ?= y
|
|
|
|
CONFIG_BES2600_DEBUGFS ?= y
|
|
CONFIG_BES2600_ITP ?= n
|
|
|
|
CONFIG_BES2600_NON_POWER_OF_TWO_BLOCKSIZES ?= n
|
|
CONFIG_BES2600_CALIB_FROM_LINUX ?= y
|
|
|
|
CONFIG_BES2600_WIFI_BOOT_ON ?= y
|
|
CONFIG_BES2600_BT_BOOT_ON ?= n
|
|
|
|
BES2600_GPIO_WAKEUP_AP ?= n
|
|
BES2600_WRITE_DPD_TO_FILE ?= n
|
|
BES2600_TX_MORE_RETRY ?= n
|
|
|
|
# bes evb
|
|
BES2600_INDEPENDENT_EVB ?= n
|
|
# wifi module for allwinner made by bes
|
|
BES2600_INTEGRATED_MODULE_V1 ?= n
|
|
# xiaomi R329 wifi module
|
|
BES2600_INTEGRATED_MODULE_V2 ?= n
|
|
# sicun QM215 wifi module
|
|
BES2600_INTEGRATED_MODULE_V3 ?= n
|
|
|
|
# 0: use dynamic_ps_timeout value
|
|
# other: override dynamic_ps_timeout value
|
|
BES2600_FASTPS_IDLE_TIME ?= 8
|
|
|
|
#1.rock api(fixed macaddr)
|
|
#2.read from file(macaddr of customers)
|
|
#3.read from file(macaddr template)
|
|
#4.random macaddr
|
|
GET_MAC_ADDR_METHOD ?= 4
|
|
|
|
ifeq ($(CONFIG_BES2600_DEBUGFS),y)
|
|
BES2600_DUMP_FW_DPD_LOG ?= n
|
|
endif
|
|
|
|
ifeq ($(CONFIG_BES2600_TESTMODE),y)
|
|
CONFIG_BES2600_KEEP_ALIVE ?= n
|
|
ifeq ($(CONFIG_BES2600_KEEP_ALIVE),y)
|
|
ccflags-y += -DVENDOR_XM_KEEPALIVE
|
|
endif
|
|
endif
|
|
|
|
BES2600_DRV_VERSION := bes2600_0.3.5_2024.0116
|
|
|
|
ifeq ($(CONFIG_BES2600_CALIB_FROM_LINUX),y)
|
|
FACTORY_CRC_CHECK ?= n
|
|
STANDARD_FACTORY_EFUSE_FLAG ?= n
|
|
FACTORY_PATH ?= bes2600/bes2600_factory.txt
|
|
endif
|
|
|
|
# basic function
|
|
define boolen_flag
|
|
$(strip $(if $(findstring $($(1)),$(2)),-D$(1)))
|
|
endef
|
|
|
|
define string_flag
|
|
$(strip $(if $($(1)),-D$(1)=\"$($(1))\"))
|
|
endef
|
|
|
|
define value_flag
|
|
$(strip $(if $($(1)),-D$(1)=$($(1))))
|
|
endef
|
|
|
|
ccflags-y += -Werror
|
|
|
|
SDIO_HOST_ADMA_SUPPORT ?= y
|
|
ccflags-y += -DCONFIG_BES2600_WLAN_BES
|
|
ccflags-y += -DBES_SDIO_RXTX_TOGGLE
|
|
ccflags-y += -DBES_SDIO_TX_MULTIPLE_ENABLE
|
|
ccflags-y += -DBES_SDIO_RX_MULTIPLE_ENABLE
|
|
ccflags-y += -DBES_UNIFIED_PM
|
|
ccflags-y += -DBES_SDIO_OPTIMIZED_LEN
|
|
ccflags-y += -DBES2600_HOST_TIMESTAMP_DEBUG
|
|
|
|
ifeq ($(BES2600_WRITE_DPD_TO_FILE),y)
|
|
BES2600_DPD_PATH ?= /data/cfg/bes2600_dpd.bin
|
|
BES2600_DEFAULT_DPD_PATH ?= /lib/firmware/bes2600_dpd.bin
|
|
BES2600_DPD_GOLDEN_PATH ?= /data/cfg/bes2600_dpd_golden.bin
|
|
endif
|
|
|
|
ifeq ($(BES2600_DUMP_FW_DPD_LOG),y)
|
|
BES2600_DPD_LOG_PATH ?= /data/applog/bes2600_dpd_log.log
|
|
endif
|
|
|
|
# compilation macros setting
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_VENDOR_CMD,y)
|
|
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_STATIC_SDD,y)
|
|
ccflags-y += $(call boolen_flag,P2P_MULTIVIF,y)
|
|
ccflags-y += $(call boolen_flag,AP_AGGREGATE_FW_FIX,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_BT,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_WAPI_SUPPORT,y)
|
|
ccflags-y += $(call boolen_flag,WIFI_BT_COEXIST_EPTA_ENABLE,y)
|
|
ccflags-y += $(call boolen_flag,WIFI_BT_COEXIST_EPTA_FDD,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_DISABLE_BEACON_HINTS,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_NON_POWER_OF_TWO_BLOCKSIZES,y)
|
|
ccflags-y += $(call boolen_flag,BES2600_TX_MORE_RETRY,y)
|
|
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_ITP,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_DEBUGFS,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_BH_DEBUG,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_WSM_DEBUG,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_WSM_DUMPS,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_WSM_DUMPS_SHORT,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_TXRX_DEBUG,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_TX_POLICY_DEBUG,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_STA_DEBUG,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_DUMP_ON_ERROR,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_WOWLAN,y)
|
|
ccflags-y += $(call value_flag,CONFIG_BES2600_LISTEN_INTERVAL)
|
|
ccflags-y += $(call value_flag,BES2600_FASTPS_IDLE_TIME)
|
|
ccflags-y += $(call boolen_flag,BSS_LOSS_CHECK,y)
|
|
|
|
ccflags-y += $(call string_flag,BES2600_LOAD_FW_TOOL_PATH)
|
|
ccflags-y += $(call string_flag,BES2600_LOAD_FW_TOOL_DEVICE)
|
|
ccflags-y += $(call string_flag,BES2600_DRV_VERSION)
|
|
ccflags-y += $(call string_flag,BES2600_DPD_PATH)
|
|
ccflags-y += $(call string_flag,BES2600_DEFAULT_DPD_PATH)
|
|
ccflags-y += $(call string_flag,BES2600_DPD_GOLDEN_PATH)
|
|
|
|
ccflags-y += $(call boolen_flag,BES2600_INDEPENDENT_EVB,y)
|
|
ccflags-y += $(call boolen_flag,BES2600_INTEGRATED_MODULE_V1,y)
|
|
ccflags-y += $(call boolen_flag,BES2600_INTEGRATED_MODULE_V2,y)
|
|
ccflags-y += $(call boolen_flag,BES2600_INTEGRATED_MODULE_V3,y)
|
|
ccflags-y += $(call boolen_flag,SDIO_HOST_ADMA_SUPPORT,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_TESTMODE,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_KEEP_ALIVE,y)
|
|
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_WIFI_BOOT_ON,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_BT_BOOT_ON,y)
|
|
ccflags-y += $(call boolen_flag,CONFIG_BES2600_CALIB_FROM_LINUX,y)
|
|
|
|
ccflags-y += $(call value_flag,GET_MAC_ADDR_METHOD)
|
|
ccflags-y += $(call string_flag,PATH_WIFI_MACADDR)
|
|
ccflags-y += $(call string_flag,FACTORY_PATH)
|
|
ccflags-y += $(call string_flag,FACTORY_DEFAULT_PATH)
|
|
ccflags-y += $(call boolen_flag,FACTORY_SAVE_MULTI_PATH,y)
|
|
ccflags-y += $(call boolen_flag,FACTORY_CRC_CHECK,y)
|
|
|
|
ccflags-y += $(call boolen_flag,BES2600_GPIO_WAKEUP_AP,y)
|
|
ccflags-y += $(call boolen_flag,BES2600_WRITE_DPD_TO_FILE,y)
|
|
|
|
ccflags-y += $(call boolen_flag,BES2600_DUMP_FW_DPD_LOG,y)
|
|
ccflags-y += $(call string_flag,BES2600_DPD_LOG_PATH)
|
|
|
|
ccflags-y += $(call boolen_flag,STANDARD_FACTORY_EFUSE_FLAG,y)
|
|
|
|
# internal feature options
|
|
ccflags-y += -DAP_HT_CAP_UPDATE
|
|
ccflags-y += -DBES2600_RX_IN_BH
|
|
ccflags-y += -DDCW1260_DETECTION_LOGIC
|
|
|
|
# sdd options
|
|
ccflags-y += -DTEST_11B=0
|
|
ccflags-y += -DDPD_CALI=0
|
|
ccflags-y += -DDPD_CALI=0
|
|
ccflags-y += -DALI_CONFG=0
|
|
ccflags-y += -DCHIP_WIFI_ROM_VER=1
|
|
ccflags-y += -DWIFI_OUT_FEM=0
|
|
ccflags-y += -DRF_TX_CONTROL_IO=16
|
|
|
|
# stbc rx option
|
|
ccflags-y += -DSTBC_RX_24G=0
|
|
ccflags-y += -DSTBC_RX_5G=0
|
|
|
|
#ccflags-y += -DP2P_STA_COEX
|
|
#ccflags-y += -DMCAST_FWDING
|
|
#ccflags-y += -DAP_AGGREGATE_FW_FIX
|
|
# Extra IE for probe response from upper layer is needed in P2P GO
|
|
# For offloading probe response to FW, the extra IE must be included
|
|
# in the probe response template
|
|
#ccflags-y += -DPROBE_RESP_EXTRA_IE
|
|
ccflags-y += -DIPV6_FILTERING
|
|
|
|
# basic files for building module
|
|
bes2600-y := \
|
|
fwio.o \
|
|
txrx.o \
|
|
main.o \
|
|
queue.o \
|
|
hwio.o \
|
|
bh.o \
|
|
wsm.o \
|
|
sta.o \
|
|
ap.o \
|
|
scan.o \
|
|
bes_chardev.o \
|
|
tx_loop.o \
|
|
bes_fw.o \
|
|
bes_fw_common.o \
|
|
bes2600_factory.o \
|
|
bes2600_sdio.o
|
|
|
|
# compilation files select
|
|
bes2600-$(CONFIG_BES2600_DEBUGFS) += debug.o
|
|
bes2600-$(CONFIG_BES2600_ITP) += itp.o
|
|
bes2600-$(CONFIG_PM) += pm.o
|
|
bes2600-$(CONFIG_BES2600_BT) += bes2600_btusb.o
|
|
bes2600-$(CONFIG_BES2600_TESTMODE) += wifi_testmode_cmd.o
|
|
|
|
bes2600-$(WIFI_BT_COEXIST_EPTA_ENABLE) += epta_coex.o epta_request.o
|
|
bes2600-$(CONFIG_BES2600_WOWLAN) += bes_pwr.o
|
|
|
|
obj-$(BES2600) += bes2600.o
|
|
|
|
all: modules
|
|
|
|
modules clean:
|
|
$(MAKE) -C $(KERN_DIR) M=$(shell pwd) $@
|