test0r
b8ba0b342e
Fold bes2600/tx-sdio-dma-oob into the linear series as 7/7. Re-cover-letter and update testing matrix. Update UPSTREAM.md table and submission route to list the 7th branch. The PS Mode Error residual note is removed from the known-limitations section -- it stopped recurring after 7/7 deployed. Both staging-prep-series/ (Mobian paths) and staging-prep-series- danctnix/ (drivers/staging/bes2600/ paths) variants regenerated; all 14 patch files checkpatch --strict clean (0/0/0). Net: +117 / -550 lines across 9 files.
109 lines
4.0 KiB
Diff
109 lines
4.0 KiB
Diff
From 108d3967eac4ba3a6e0f508d865a5f221b49079d Mon Sep 17 00:00:00 2001
|
|
Message-ID: <108d3967eac4ba3a6e0f508d865a5f221b49079d.1776940528.git.fritsche.markus@gmail.com>
|
|
In-Reply-To: <cover.1776940528.git.fritsche.markus@gmail.com>
|
|
References: <cover.1776940528.git.fritsche.markus@gmail.com>
|
|
From: Markus Fritsche <fritsche.markus@gmail.com>
|
|
Date: Wed, 22 Apr 2026 12:37:45 +0200
|
|
Subject: [PATCH 4/7] bes2600: gate device LP-mode entry on successful per-VIF
|
|
firmware handshake
|
|
|
|
bes2600_pwr_enter_lp_mode() drives the transition to low-power for each
|
|
associated STA VIF: it pushes wsm_set_pm(), waits up to 5 seconds on
|
|
pm_enter_cmpl for the firmware to acknowledge, then unconditionally
|
|
calls bes2600_pwr_device_enter_lp_mode() to drop the device end of the
|
|
bus.
|
|
|
|
Two bugs:
|
|
|
|
1. A failed wsm_set_pm() only logs an error, then still falls into
|
|
wait_for_completion_timeout() on a completion the firmware will
|
|
never post (the set-mode command never reached it). The loop
|
|
therefore always blocks the full 5 s, logs a second error, and
|
|
proceeds.
|
|
|
|
2. A genuine wait-timeout (firmware received the set-mode command but
|
|
never posted the indication) also only logs a warning. The code
|
|
then drops to bes2600_pwr_device_enter_lp_mode(), handing the
|
|
device subsystem an inconsistent view of mac-layer state.
|
|
|
|
On PineTab2 (BES2600WM + RK3566) the second bug is the recurring
|
|
root-cause of the 'bes2600_pwr_enter_lp_mode, wait pm ind timeout'
|
|
message flooding dmesg every 5-10 s when the interface is associated
|
|
and idle. Sending the device to LP in that state cascades into the
|
|
SDIO TX path as the 'bes_sdio_memcpy_to_io_helper / sdio_tx_work'
|
|
WARN splat.
|
|
|
|
Fix:
|
|
- Add a 'timeouts' counter; bump it on both failure paths.
|
|
- Skip the wait_for_completion entirely when wsm_set_pm() failed
|
|
(there is no completion to wait for).
|
|
- Only call bes2600_pwr_device_enter_lp_mode() when every per-VIF
|
|
handshake reached firmware-ACKed completion; otherwise return
|
|
-ETIMEDOUT and leave the device in its current power state.
|
|
|
|
Tested-on: PineTab2 running linux-pinetab2 6.19.10-danctnix1-1.
|
|
Post-patch the handshake still fails on this particular firmware
|
|
revision (separate root-cause investigation outside this patch), but
|
|
the driver now returns -ETIMEDOUT cleanly instead of flooding dmesg
|
|
and destabilising the SDIO path.
|
|
|
|
Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>
|
|
---
|
|
drivers/staging/bes2600/bes_pwr.c | 20 +++++++++++++++++---
|
|
1 file changed, 17 insertions(+), 3 deletions(-)
|
|
|
|
diff --git a/drivers/staging/bes2600/bes_pwr.c b/bes2600/bes_pwr.c
|
|
index e7a1045..f62ae22 100644
|
|
--- a/drivers/staging/bes2600/bes_pwr.c
|
|
+++ b/drivers/staging/bes2600/bes_pwr.c
|
|
@@ -472,6 +472,7 @@ static int bes2600_pwr_enter_lp_mode(struct bes2600_common *hw_priv)
|
|
int i = 0;
|
|
struct bes2600_vif *priv;
|
|
int ret = 0;
|
|
+ int timeouts = 0;
|
|
char ip_str[20];
|
|
unsigned long status = 0;
|
|
|
|
@@ -528,22 +529,35 @@ static int bes2600_pwr_enter_lp_mode(struct bes2600_common *hw_priv)
|
|
if (ret) {
|
|
atomic_set(&hw_priv->bes_power.pm_set_in_process, 0);
|
|
bes_err("%s, set operation mode fail\n", __func__);
|
|
+ timeouts++;
|
|
+ continue;
|
|
}
|
|
|
|
/* wait power save mode changed indication */
|
|
status = wait_for_completion_timeout(&hw_priv->bes_power.pm_enter_cmpl, 5 * HZ);
|
|
atomic_set(&hw_priv->bes_power.pm_set_in_process, 0);
|
|
reinit_completion(&hw_priv->bes_power.pm_enter_cmpl);
|
|
- if (!status)
|
|
+ if (!status) {
|
|
bes_err("%s, wait pm ind timeout\n", __func__);
|
|
+ timeouts++;
|
|
+ }
|
|
} else {
|
|
bes_devel("skip enter lp mode\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
- /* set device low power configuration */
|
|
- bes2600_pwr_device_enter_lp_mode(hw_priv);
|
|
+ /*
|
|
+ * Enter the device-end of the LP transition only if every per-VIF
|
|
+ * mac80211 handshake reached firmware-ACKed completion. Doing the
|
|
+ * device-LP setup while any VIF is still pending leaves the driver
|
|
+ * in an inconsistent state that cascades into SDIO TX errors on
|
|
+ * the BES2600.
|
|
+ */
|
|
+ if (timeouts == 0)
|
|
+ bes2600_pwr_device_enter_lp_mode(hw_priv);
|
|
+ else
|
|
+ ret = -ETIMEDOUT;
|
|
|
|
return ret;
|
|
}
|
|
--
|
|
2.53.0
|
|
|