6f4b580f7c8d4c6705de26318fea3e111d08ce97
2 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 marfrit
|
6f4b580f7c |
Phase 8.5: full V4L2 m2m driver, VP9 decode via QBUF/DQBUF
Replaces the Phase 8.4 debugfs-triggered chardev path with a
real V4L2 m2m driver. Userspace clients now drive decoding the
standard way — S_FMT / REQBUFS / QBUF on the OUTPUT (bitstream)
queue, DQBUF on the CAPTURE (NV12M) queue. Kernel device_run
packs the bitstream into REQ_DECODE; daemon decodes via FFmpeg;
RESP_FRAME's inline NV12 pixel payload lands in the CAPTURE
buffer. Phase 8.6 swaps the inline payload for dmabuf so big
frames stop being capped at 64 KiB.
Kernel (daedalus_v4l2_main.c, rewritten + main.h added):
- Per-open struct daedalus_ctx: v4l2_fh, m2m_ctx, ctrl_handler,
per-queue v4l2_pix_format_mplane.
- Two vb2_queues (vb2_vmalloc_memops for both — no DMA needed
yet; 8.6 switches CAPTURE to dma_contig for dmabuf-export):
OUTPUT = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, VP9_FRAME
CAPTURE = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, NV12M
- Full v4l2_ioctl_ops table: querycap, enum_fmt, g/s/try_fmt
for both queues, reqbufs/querybuf/qbuf/dqbuf/create_bufs/
prepare_buf/expbuf/streamon/streamoff via v4l2_m2m_ioctl_*
helpers.
- v4l2_m2m_ops.device_run: peeks next OUTPUT buf, builds
REQ_DECODE inline with the bitstream bytes, enqueues with an
auto-incrementing cookie, stores {ctx, src_buf, dst_buf} in
a per-device inflight list. Job stays open until RESP_FRAME.
- daedalus_complete_resp_frame(): pops the inflight entry,
memcpys inline NV12 pixels into the CAPTURE buffer (Y plane
+ interleaved CbCr), finishes via
v4l2_m2m_buf_done_and_job_finish — NOT plain buf_done +
job_finish, which leaves the src buf on the m2m queue and
causes device_run to immediately re-run on the same input
(caught on first run; second REQ_DECODE for same bitstream +
eventual oops in stop_streaming on teardown).
Kernel (daedalus_v4l2_chardev.c):
- RESP_FRAME handler now hands inline pixel payload to
daedalus_complete_resp_frame so it lands in the CAPTURE
vb2 buffer. Existing PONG and debugfs test_decode paths still
work; the latter produces a harmless ratelimited "unknown
cookie" since it bypasses V4L2 m2m.
Daemon (decoder.c, decoder.h):
- daedalus_decoder_run_request signature extended with
(nv12_out, nv12_cap, nv12_used). After the FNV-1a digest the
decoder packs YUV420P into NV12 in the caller's buffer: Y
plane line-by-line stripped of stride padding; Cb/Cr
interleaved into a single chroma plane. Truncation silent —
kernel only memcpys what fits in the CAPTURE plane.
Daemon (chardev_client.c):
- handle_req_decode allocates a response buffer sized for the
full chardev payload, lets decoder fill the pixel area
after the resp_frame struct, sends the full payload via the
existing send_response.
Test client (tools/test_m2m_decode.c, new):
- Minimal V4L2 m2m client: S_FMT both queues, REQBUFS 1 each,
mmap+fill OUTPUT, QBUF both, STREAMON, poll, DQBUF, dump
CAPTURE planes to a raw NV12 file. ~250 LOC; verifies the
whole flow without needing v4l2-ctl framing.
Roadmap update (docs/roadmap.md):
- Phase 8.4 retitled "daemon ↔ kernel decode round-trip"
to reflect what actually shipped (vs. the original V4L2-
ioctl-driven plan which moved here).
- Phase 8.5 retitled "full V4L2 m2m driver" with closure
status.
- Phase 8.6 reshaped to two tracks: dmabuf + AV1/H.264/
stateless controls + media controller. Adds the punch list
of v4l2-compliance failures (DECODER_CMD, S_FMT colorspace)
that 8.6 will fix.
Verification on hertz (Pi 5, 6.12.75+rpt-rpi-2712):
Kernel + daemon build clean (-Wall -Wextra clean both sides).
Test harness drives one VP9 keyframe end-to-end:
OUTPUT REQBUFS -> 2
CAPTURE REQBUFS -> 2
QBUF OUTPUT[0] bytesused=1566
QBUF CAPTURE[0]; STREAMON both
poll revents=0x5
DQBUF OUTPUT[0] flags=0x4001 (DONE)
DQBUF CAPTURE[0] flags=0x4000 payloads=[12288, 6144]
wrote 12288 Y + 6144 UV bytes to /tmp/out_m2m.nv12
Pixel correctness vs reference:
ffmpeg -i vp9_small.ivf -pix_fmt nv12 -f rawvideo -y ref.nv12
cmp /tmp/out_m2m.nv12 /tmp/ref.nv12 → match ✓
Byte-for-byte identical to FFmpeg's stock CPU decode.
v4l2-compliance: detected as Stateless Decoder; most ioctls
pass; two expected fails documented in closure doc
(DECODER_CMD/media controller, S_FMT colorspace).
Clean teardown: SIGTERM the daemon, rmmod the module, no
oops/WARN in dmesg.
Per correctness-before-speed:
- Real V4L2 ioctl table (not stubs); uses v4l2-core helpers
where they exist instead of reinventing.
- v4l2_m2m_buf_done_and_job_finish (not the manual sequence)
to keep scheduler state consistent.
- Bit-exact reference comparison, not just "looks right."
- Documented every compliance failure with the planned fix.
- All resource paths (kmalloc/kfree, inflight list cleanup,
src/dst buf removal in stop_streaming) handled on every
error branch.
Phase 8.6 next: dmabuf-export for CAPTURE (removes 64 KiB
frame-size cap), add AV1+H.264 codecs, add V4L2 stateless
controls + media controller binding, fix the colorspace +
cookie-namespace compliance issues.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
marfrit
|
c7d8050cc9 |
Initial scaffold: daedalus-v4l2 sibling repo
V4L2 stateless decoder for Pi 5, backed by sibling
daedalus-fourier kernel library (VP9 + AV1 CDEF + H.264 video
decode kernels on VideoCore VII compute + ARM NEON).
Architecture locked 2026-05-18 by mfritsche per
daedalus-fourier/docs/phase8_scoping.md:
- Option B: Linux kernel V4L2 shim + userspace daemon (not
v4l2loopback). Real /dev/videoNN; proper DRM PRIME for
browser zero-copy.
- Option γ: dlopen FFmpeg at runtime as parser. No vendoring;
fastest to v1.
- Sibling repo (this repo): V4L2-side work outside of
daedalus-fourier so kernel-library API stays clean.
Components:
kernel/ - Linux out-of-tree kernel module (GPLv2; V4L2
device + chardev bridge to userspace daemon)
daemon/ - userspace decoder daemon (BSD-2-Clause; links
libdaedalus_core.a from sibling; dlopens FFmpeg)
docs/ - architecture + 7-phase roadmap (8.1..8.7)
include/ - shared headers between kernel and daemon
Roadmap (7 sub-phases, ~1 week each):
8.1 kernel skeleton (/dev/videoNN with no-op ioctls)
8.2 chardev bridge (kernel ↔ daemon ping-pong)
8.3 daemon FFmpeg dlopen + parse path
8.4 VP9 end-to-end via daedalus_dispatch_*
8.5 dmabuf / DRM PRIME for zero-copy
8.6 AV1 + H.264 codec support
8.7 performance: hit 30fps@1080p (project floor)
No code yet — only README + design docs + directory structure.
First implementation work starts in Phase 8.1 next session.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|