bes2600: take pending_record_lock with _bh() to fix SOFTIRQ-safe → -unsafe inversion (besser#18)

PROVE_LOCKING reports:

  WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
  kworker/u16:1 is trying to acquire:
    &hw_priv->tx_loop.pending_record_lock at bes2600_queue_clear+0x80
  and this task is already holding:
    &queue->lock at bes2600_queue_clear+0x60

  which would create a new lock dependency:
    (&queue->lock){+.-.}   -> (&hw_priv->tx_loop.pending_record_lock){+.+.}

  but this new dependency connects a SOFTIRQ-irq-safe lock:
    (&queue->lock){+.-.}
  ... which became SOFTIRQ-irq-safe at:
    bes2600_tx -> ieee80211_handle_wake_tx_queue -> tasklet_action
  to a SOFTIRQ-irq-unsafe lock:
    (&hw_priv->tx_loop.pending_record_lock){+.+.}
  ... which became SOFTIRQ-irq-unsafe at:
    bes2600_queue_get_skb -> bes2600_join_work -> process_one_work

queue->lock is taken consistently with spin_lock_bh() at 22 sites;
the nested acquisition of pending_record_lock at queue.c:289 (inside
the outer queue->lock_bh held at line 285) had it implicitly BH-safe
via the outer scope. But pending_record_lock is ALSO taken from
non-BH-disabled contexts:

  bes2600_queue_get_skb  (queue.c:832)  — process context via
    bes2600_join_work (workqueue), no outer queue->lock held
  bes2600_tx_loop_item_pending_check (tx_loop.c:112)
                                     — TX-loop context, no outer
                                     queue->lock held

When CPU0 holds pending_record_lock from one of those non-BH paths
and a softirq fires that wants queue->lock, and CPU1 in softirq has
queue->lock and is about to acquire pending_record_lock — classic AB-BA
SOFTIRQ deadlock.

The fix is the conservative one: take pending_record_lock with _bh()
at every site that's not already inside a queue->lock_bh-held scope.
That makes the lock consistently SOFTIRQ-safe, eliminating the
inversion. queue.c:289/295 stays as plain spin_lock because BH is
already disabled by the outer queue->lock_bh acquired at queue.c:285.

Five sites converted:
  bes2600/queue.c:832 -- spin_lock      -> spin_lock_bh
  bes2600/queue.c:839 -- spin_unlock    -> spin_unlock_bh
  bes2600/queue.c:844 -- spin_unlock    -> spin_unlock_bh
  bes2600/tx_loop.c:112 -- spin_lock    -> spin_lock_bh
  bes2600/tx_loop.c:114 -- spin_unlock  -> spin_unlock_bh

Contract:
  - Documentation/locking/locktypes.rst spelling: spin_lock_bh() is
    the canonical way to make a non-IRQ spinlock safe against
    softirq preemption that might re-enter the same lock.
  - Same shape as queue->lock in this driver and as is_drv->lock
    in the cw1200 ancestor.

Closes: besser#18
Fixes: <bes2600 base import>
Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>

bes2600/ap.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * mac80211 STA and AP API for mac80211 BES2600 drivers
+ * AP mode for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include "bes2600.h"
@@ -65,8 +62,11 @@ int bes2600_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct bes2600_vif *priv = cw12xx_get_vif_from_ieee80211(vif);
 	struct bes2600_link_entry *entry;
 	struct sk_buff *skb;
+	struct sk_buff_head local_drain;
 	struct bes2600_common *hw_priv = hw->priv;
 
+	__skb_queue_head_init(&local_drain);
+
 #ifdef P2P_MULTIVIF
 	WARN_ON(priv->if_id == CW12XX_GENERIC_IF_ID);
 #endif
@@ -95,9 +95,17 @@ int bes2600_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 					IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK)
 		priv->sta_asleep_mask |= BIT(sta_priv->link_id);
 	entry->status = BES2600_LINK_HARD;
-	while ((skb = skb_dequeue(&entry->rx_queue)))
+	/*
-		ieee80211_rx_irqsafe(priv->hw, skb);
+	 * Patch C2: splice the rx_queue out under the lock then deliver
+	 * after unlock.  ieee80211_rx_ni() runs the mac80211 RX path
+	 * synchronously (formerly ieee80211_rx_irqsafe deferred to a
+	 * tasklet); calling it from inside spin_lock_bh would hold the
+	 * lock across mac80211's full RX dispatch.
+	 */
+	skb_queue_splice_init(&entry->rx_queue, &local_drain);
 	spin_unlock_bh(&priv->ps_state_lock);
+	while ((skb = __skb_dequeue(&local_drain)))
+		ieee80211_rx_ni(priv->hw, skb);
 #ifdef AP_AGGREGATE_FW_FIX
 	hw_priv->connected_sta_cnt++;
 	if(hw_priv->connected_sta_cnt>1) {

bes2600/ap.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * mac80211 STA and AP API for mac80211 BES2600 drivers
+ * AP mode interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/version.h>
 #ifndef AP_H_INCLUDED

bes2600/bes2600.h

@@ -1,18 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Common private data for BES2600 drivers
+ * Common private data for BES2600 mac80211 driver
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
  * Based on the mac80211 Prism54 code, which is
  * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
  *
- * Based on the islsm (softmac prism54) driver, which is:
+ * Based on the islsm (softmac prism54) driver, which is
  * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_H
@@ -356,15 +353,23 @@ struct bes2600_common {
 	* Keeping in common structure for the time being. Will be moved to VIFF
 	* after the mechanism is clear */
 	u8				ba_tid_mask;
-	int				ba_acc; /*TODO: Same as above */
+	/*
-	int				ba_cnt; /*TODO: Same as above */
+	 * Patch D: ba_lock removed.  Per-frame TX/RX hot-path bumped these
-	int				ba_cnt_rx; /*TODO: Same as above */
+	 * counters under spin_lock_bh; the lock did not protect any
-	int				ba_acc_rx; /*TODO: Same as above */
+	 * compound invariant that atomic ops can't satisfy.  Counters are
-	int				ba_hist; /*TODO: Same as above */
+	 * now atomic_t; ba_armed gates the once-per-window mod_timer
-	struct timer_list		ba_timer;/*TODO: Same as above */
+	 * arm via cmpxchg so concurrent TX/RX at a fresh window each
-	spinlock_t			ba_lock; /*TODO: Same as above */
+	 * try to claim the arm and exactly one succeeds.
-	bool				ba_ena; /*TODO: Same as above */
+	 */
-	struct work_struct              ba_work; /*TODO: Same as above */
+	atomic_t			ba_acc;
+	atomic_t			ba_cnt;
+	atomic_t			ba_cnt_rx;
+	atomic_t			ba_acc_rx;
+	atomic_t			ba_armed;
+	int				ba_hist;
+	struct timer_list		ba_timer;
+	atomic_t			ba_ena;
+	struct work_struct              ba_work;
 	bool				is_BT_Present;
 	bool				is_go_thru_go_neg;
 	u8				conf_listen_interval;

bes2600/bes2600_factory.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Factory calibration loader for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>

bes2600/bes2600_factory.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * Factory calibration loader interface
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef __FACTORY_H__
 #define __FACTORY_H__

bes2600/bes2600_plat.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * Platform data for BES2600 SDIO bus
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef BES2600_PLAT_H_INCLUDED
 #define BES2600_PLAT_H_INCLUDED

bes2600/bes2600_sdio.c

@@ -1,12 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 SDIO driver for BES2600 device
+ * SDIO bus glue for BES2600 mac80211 driver
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
+ * Derived from drivers/net/wireless/st/cw1200/cw1200_sdio.c
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
  *
- * Copyright (c) 2010, Bestechnic
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
  #define DEBUG 1
 #include <linux/version.h>
@@ -29,6 +30,7 @@
 #include <linux/of_gpio.h>
 
 #include "bes2600.h"
+#include "bh.h"
 #include "sbus.h"
 #include "bes2600_plat.h"
 #include "bes2600_factory.h"
@@ -72,10 +74,12 @@ struct sbus_priv {
 	int rx_data_toggle;
 #endif
 #ifdef BES_SDIO_RX_MULTIPLE_ENABLE
-	spinlock_t rx_queue_lock;
+	/*
-	struct sk_buff_head rx_queue;
+	 * Patch C v3: rx_queue, rx_queue_lock, rx_work removed (no relay).
+	 * The bh thread now reads RX inline; the rx_buffer scratch area
+	 * stays.  Counters/timestamps stay for debugfs visibility.
+	 */
 	u8 *rx_buffer;
-	struct work_struct rx_work;
 	u32 rx_last_ctrl;
 	u32 rx_valid_ctrl;
 	u32 rx_total_ctrl_cnt;
@@ -412,10 +416,19 @@ static void bes2600_sdio_irq_handler(struct sdio_func *func)
 
 	bes_devel("%s called, fw_started:%d \n",
 			 __func__, self->fw_started);
-	if (likely(self->fw_started && self->core)) {
+	/*
-		queue_work(self->sdio_wq, &self->rx_work);
+	 * Patch C v3: no more sdio_rx_work relay.  Wake the bh thread
+	 * directly via self->irq_handler (bes2600_irq_handler in bh.c
+	 * which bumps bh_rx atomic + wakes bh_wq).  The bh thread will
+	 * then call sbus_ops->bus_rx_batch() to do the SDIO read inline.
+	 * Matches cw1200 mainline IRQ → bh-direct architecture.
+	 */
+	if (likely(self->fw_started && self->core && self->irq_handler)) {
+		spin_lock_irqsave(&self->lock, flags);
+		self->irq_handler(self->irq_priv);
+		spin_unlock_irqrestore(&self->lock, flags);
 		self->last_irq_timestamp = jiffies;
-	} else if(self->irq_handler) {
+	} else if (self->irq_handler) {
 		spin_lock_irqsave(&self->lock, flags);
 		self->irq_handler(self->irq_priv);
 		spin_unlock_irqrestore(&self->lock, flags);
@@ -812,10 +825,15 @@ static int bes2600_sdio_extract_packets(struct sbus_priv *self, u32 ctrl_reg, u8
 		skb_put(skb, packet_len);
 		memcpy(skb->data, &data[pos], packet_len);
 		bes_devel("%s, %d,%d\n", __func__, packet_len, pos);
-		spin_lock(&self->rx_queue_lock);
-		skb_queue_tail(&self->rx_queue, skb);
 		self->rx_data_cnt++;
-		spin_unlock(&self->rx_queue_lock);
+		/*
+		 * Patch C v3: deliver the SKB directly into the WSM/mac80211
+		 * stack from the bh thread.  No rx_queue, no inter-thread
+		 * handoff, no atomic_t needed on the counters that
+		 * wsm_release_tx_buffer touches — single-writer-from-bh is
+		 * preserved by construction.  See bh.c for the contract block.
+		 */
+		bes2600_bh_handle_rx_skb(self->core, skb);
 		packet_len = (packet_len + 3) & (~0x3);
 		pos += packet_len;
 		#ifdef BES_SDIO_OPTIMIZED_LEN
@@ -826,17 +844,31 @@ static int bes2600_sdio_extract_packets(struct sbus_priv *self, u32 ctrl_reg, u8
 	return 0;
 }
 
-static void sdio_rx_work(struct work_struct *work)
+/*
+ * Patch C v3: bh thread calls this directly via sbus_ops->bus_rx_batch.
+ * No more sdio_rx_work workqueue.  SDIO read sequence (lock →
+ * read_ctrl → memcpy_fromio → packets_check → extract_packets) runs
+ * inline in bh-thread context.  Each parsed SKB is delivered via
+ * bes2600_bh_handle_rx_skb() from extract_packets — no rx_queue, no
+ * second worker, no inter-thread handoff.
+ *
+ * Architecture matches cw1200 mainline.  Single-writer-from-bh
+ * invariant on hw_bufs_used preserved by construction.
+ *
+ * Returns 0 on success (caller's bh outer loop decides whether to
+ * continue), negative on bus read error.  On error: triggers
+ * wifi_force_close (same as the old sdio_rx_work).
+ */
+static int bes2600_sdio_read_rx_batch(struct sbus_priv *self)
 {
-	int ret, again = 0, retry = 0, crc_retry = 0;
+	int ret = 0, again = 0, retry = 0, crc_retry = 0;
 	u32 ctrl_reg = 0;
 	int total_len;
-	struct sbus_priv *self = container_of(work, struct sbus_priv, rx_work);
 	u8 *buf = self->rx_buffer;
 
 	/* don't read/write sdio when sdio error */
 	if (bes2600_chrdev_is_bus_error())
-		return;
+		return 0;
 
 	bes2600_gpio_wakeup_mcu(self, GPIO_WAKE_FLAG_SDIO_RX);
 
@@ -891,6 +923,10 @@ static void sdio_rx_work(struct work_struct *work)
 			goto failed;
 		}
 
+		/*
+		 * extract_packets parses the multi-RX buffer and calls
+		 * bes2600_bh_handle_rx_skb() per SKB.  No queueing.
+		 */
 		if ((ret = bes2600_sdio_extract_packets(self, ctrl_reg, buf))) {
 			bes_err("%s,%d error=%d\n", __func__, __LINE__, ret);
 			goto failed;
@@ -898,22 +934,16 @@ static void sdio_rx_work(struct work_struct *work)
 
 		ctrl_reg = 0;
 
-		if (likely(self->irq_handler)) {
-			self->irq_handler(self->irq_priv);
-		} else {
-			bes_err("%s,%d\n", __func__, __LINE__);
-			goto failed;
-		}
-
 	} while (again);
 
 	bes2600_gpio_allow_mcu_sleep(self, GPIO_WAKE_FLAG_SDIO_RX);
-	return;
+	return 0;
 
 failed:
 	bes2600_gpio_allow_mcu_sleep(self, GPIO_WAKE_FLAG_SDIO_RX);
 	bes2600_chrdev_wifi_force_close(self->core, false);
 	WARN_ON(1);
+	return -1;
 }
 
 static void sdio_scan_work(struct work_struct *work)
@@ -921,26 +951,11 @@ static void sdio_scan_work(struct work_struct *work)
 	bes_warn("%s: this function does nothing\n", __FUNCTION__);
 }
 
-static void *bes2600_sdio_pipe_read(struct sbus_priv *self)
+/* Patch C v3: bes2600_sdio_pipe_read deleted.  bh thread reads the
-{
+ * SDIO bus inline via bes2600_sdio_read_rx_batch (sbus_ops->bus_rx_batch).
-	struct sk_buff *skb;
+ * No rx_queue, no skb_dequeue, no relay.  bes2600_tx_loop_read remains
-
+ * for the test bus error-fallback path but is now invoked at higher
-	if (bes2600_chrdev_is_bus_error()) {
+ * level. */
-		return bes2600_tx_loop_read(self->core);
-	}
-
-	spin_lock(&self->rx_queue_lock);
-	skb = skb_dequeue(&self->rx_queue);
-	if (skb)
-		self->rx_proc_cnt++;
-	spin_unlock(&self->rx_queue_lock);
-	if (likely(self->fw_started == true &&
-		!bes2600_pwr_device_is_idle(self->core) &&
-		self->core->hw_bufs_used > 0))
-		if (!skb)
-			queue_work(self->sdio_wq, &self->rx_work);
-	return skb;
-}
 
 #endif
 
@@ -1196,7 +1211,14 @@ flush_previous:
 				}
 			} while (crc_retry <= 10);
 			sdio_release_host(self->func);
-			queue_work(self->sdio_wq, &self->rx_work);
+			/*
+			 * Patch C v3: wake the bh thread to check for any RX
+			 * that piggybacked on this TX window.  Bumps bh_rx
+			 * atomic; bh's wait_event will pick it up and call
+			 * sbus_ops->bus_rx_batch().
+			 */
+			if (likely(self->irq_handler))
+				self->irq_handler(self->irq_priv);
 			if (ret) {
 				bes_err("%s,%d err=%d,%d,%d\n", __func__, __LINE__, ret, scatters, cur_blk);
 				sdio_work_debug(self);
@@ -1247,12 +1269,11 @@ static int bes2600_sdio_misc_init(struct sbus_priv *self, struct bes2600_common
 	self->next_toggle = 0;
 #endif
 #ifdef BES_SDIO_RX_MULTIPLE_ENABLE
-	spin_lock_init(&self->rx_queue_lock);
+	/* Patch C v3: rx_queue / rx_queue_lock removed (no relay). */
-	skb_queue_head_init(&self->rx_queue);
 	self->rx_buffer = (u8 *)__get_dma_pages(GFP_KERNEL, get_order(1632 * BES_SDIO_RX_MULTIPLE_NUM));
 	if (!self->rx_buffer)
 		return -ENOMEM;
-	INIT_WORK(&self->rx_work, sdio_rx_work);
+	/* Patch C v3: sdio_rx_work removed; bh thread does the read. */
 #endif
 #ifdef BES_SDIO_TX_MULTIPLE_ENABLE
 	INIT_LIST_HEAD(&self->tx_bufferlist);
@@ -1581,22 +1602,15 @@ err:
 
 static void bes2600_sdio_empty_work(struct sbus_priv *self)
 {
-#ifdef BES_SDIO_RX_MULTIPLE_ENABLE
-	struct sk_buff *skb;
-#endif
 #ifdef BES_SDIO_TX_MULTIPLE_ENABLE
 	struct bes_sdio_tx_list_t *tx_buffer, *temp;
 #endif
 
 #ifdef BES_SDIO_RX_MULTIPLE_ENABLE
-	cancel_work_sync(&self->rx_work);
+	/*
-	while (1) {
+	 * Patch C v3: rx_work and rx_queue removed.  Counters still
-		skb = skb_dequeue(&self->rx_queue);
+	 * reset for the next attach cycle.
-		if (skb)
+	 */
-			dev_kfree_skb(skb);
-		else
-			break;
-	}
 	self->rx_last_ctrl = 0;
 	self->rx_total_ctrl_cnt = 0;
 	self->rx_continuous_ctrl_cnt = 0;
@@ -1864,7 +1878,8 @@ static struct sbus_ops bes2600_sdio_sbus_ops = {
 	.sbus_reg_write		= bes2600_sdio_reg_write,
 	.init			= bes2600_sdio_misc_init,
 #ifdef BES_SDIO_RX_MULTIPLE_ENABLE
-	.pipe_read		= bes2600_sdio_pipe_read,
+	/* Patch C v3: .pipe_read removed; bus_rx_batch replaces it. */
+	.bus_rx_batch		= bes2600_sdio_read_rx_batch,
 #endif
 #ifdef BES_SDIO_TX_MULTIPLE_ENABLE
 	.pipe_send		= bes2600_sdio_pipe_send,
@@ -1884,9 +1899,15 @@ static void bes2600_sdio_en_lp_cb(struct bes2600_common *hw_priv)
 	long unsigned int old_ts, new_ts;
 	struct sbus_priv *self = hw_priv->sbus_priv;
 
+	/*
+	 * Patch C v3: rx_work removed.  Wait for IRQ-timestamp activity
+	 * to settle by polling self->last_irq_timestamp via msleep
+	 * (best-effort).  The caller already knows the bh thread will
+	 * process pending bh_rx during its next wait_event round.
+	 */
 	do {
 		old_ts = self->last_irq_timestamp;
-		flush_work(&self->rx_work);
+		msleep(2);
 		new_ts = self->last_irq_timestamp;
 	} while(old_ts != new_ts);
 }
@@ -2244,8 +2265,12 @@ static int bes2600_sdio_suspend_noirq(struct device *dev)
 	if (func->num > 1)
 		return 0;
 
-	if(self->core &&
+	/*
-	   (work_pending(&self->rx_work) || atomic_read(&self->core->bh_rx))) {
+	 * Patch C v3: work_pending(&self->rx_work) check dropped (no
+	 * relay).  bh_rx atomic alone tells us whether the bh thread
+	 * has un-processed RX events queued.
+	 */
+	if (self->core && atomic_read(&self->core->bh_rx)) {
 		bes_devel("%s: Suspend interrupted.\n", __func__);
 		return -EAGAIN;
 	}

bes2600/bes_chardev.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Character device for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include<linux/module.h>
 #include <linux/init.h>

bes2600/bes_chardev.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * Character device interface for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef __BES_CHARDEV_H__
 #define __BES_CHARDEV_H__

bes2600/bes_fw.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Firmware download for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include "bes_fw_common.h"
 #include "bes2600.h"

bes2600/bes_fw_common.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Firmware download common code for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include "bes_fw_common.h"
 #include "bes_log.h"

bes2600/bes_fw_common.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * Firmware download common interface
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef __BES_FW_COMMON_H__
 #define __BES_FW_COMMON_H__

bes2600/bes_log.h

@@ -1,3 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * printk wrappers for BES2600
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
+ *
+ */
 extern struct device *global_dev;
 
 #ifdef CONFIG_BES2600_ENABLE_DEVEL_LOGS

bes2600/bes_nl80211_testmode_msg.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * Vendor testmode messages for BES2600
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES_NL80211_TESTMODE_MSG_H

bes2600/bes_pwr.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Chip-side power state machine for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/list.h>
 #include <linux/pm.h>

bes2600/bes_pwr.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * Chip-side power state machine interface
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef __BES_PWR_H__
 #define __BES_PWR_H__

bes2600/bh.c

@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Bottom-half thread for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <net/mac80211.h>
 #include <linux/kthread.h>
@@ -101,7 +101,7 @@ void bes2600_unregister_bh(struct bes2600_common *hw_priv)
 	coex_deinit_mode(hw_priv);
 #endif
 
-	atomic_add(1, &hw_priv->bh_term);
+	atomic_inc(&hw_priv->bh_term);
 	wake_up(&hw_priv->bh_wq);
 
 	flush_workqueue(hw_priv->bh_workqueue);
@@ -316,83 +316,6 @@ int wsm_release_buffer_to_fw(struct bes2600_vif *priv, int count)
 }
 #endif
 
-#if 0
-static struct sk_buff *bes2600_get_skb(struct bes2600_common *hw_priv, size_t len)
-{
-	struct sk_buff *skb;
-	size_t alloc_len = (len > SDIO_BLOCK_SIZE) ? len : SDIO_BLOCK_SIZE;
-
-	if (len > SDIO_BLOCK_SIZE || !hw_priv->skb_cache) {
-		skb = dev_alloc_skb(alloc_len
-				+ WSM_TX_EXTRA_HEADROOM
-				+ 8  /* TKIP IV */
-				+ 12 /* TKIP ICV + MIC */
-				- 2  /* Piggyback */);
-		/* In AP mode RXed SKB can be looped back as a broadcast.
-		 * Here we reserve enough space for headers. */
-		skb_reserve(skb, WSM_TX_EXTRA_HEADROOM
-				+ 8 /* TKIP IV */
-				- WSM_RX_EXTRA_HEADROOM);
-	} else {
-		skb = hw_priv->skb_cache;
-		hw_priv->skb_cache = NULL;
-	}
-	return skb;
-}
-
-static void bes2600_put_skb(struct bes2600_common *hw_priv, struct sk_buff *skb)
-{
-	if (hw_priv->skb_cache)
-		dev_kfree_skb(skb);
-	else
-		hw_priv->skb_cache = skb;
-}
-
-static int bes2600_bh_read_ctrl_reg(struct bes2600_common *hw_priv,
-					  u16 *ctrl_reg)
-{
-	int ret;
-
-	ret = bes2600_reg_read_16(hw_priv,
-			ST90TDS_CONTROL_REG_ID, ctrl_reg);
-	if (ret) {
-		ret = bes2600_reg_read_16(hw_priv,
-				ST90TDS_CONTROL_REG_ID, ctrl_reg);
-		if (ret)
-			bes_err("[BH] Failed to read control register.\n");
-	}
-
-	return ret;
-}
-
-static int bes2600_device_wakeup(struct bes2600_common *hw_priv)
-{
-	u16 ctrl_reg;
-	int ret;
-
-	bes_devel("[BH] Device wakeup.\n");
-
-	/* To force the device to be always-on, the host sets WLAN_UP to 1 */
-	ret = bes2600_reg_write_16(hw_priv, ST90TDS_CONTROL_REG_ID,
-			ST90TDS_CONT_WUP_BIT);
-	if (WARN_ON(ret))
-		return ret;
-
-	ret = bes2600_bh_read_ctrl_reg(hw_priv, &ctrl_reg);
-	if (WARN_ON(ret))
-		return ret;
-
-	/* If the device returns WLAN_RDY as 1, the device is active and will
-	 * remain active. */
-	if (ctrl_reg & ST90TDS_CONT_RDY_BIT) {
-		bes_devel("[BH] Device awake.\n");
-		return 1;
-	}
-
-	return 0;
-}
-
-#endif
 
 /* Must be called from BH thraed. */
 void bes2600_enable_powersave(struct bes2600_vif *priv,
@@ -402,475 +325,6 @@ void bes2600_enable_powersave(struct bes2600_vif *priv,
 	priv->powersave_enabled = enable;
 }
 
-#if 0
-#define INTERRUPT_WORKAROUND
-static int bes2600_bh(void *arg)
-{
-	struct bes2600_common *hw_priv = arg;
-	struct bes2600_vif *priv = NULL;
-	struct sk_buff *skb_rx = NULL;
-	size_t read_len = 0;
-	int rx, tx, term, suspend;
-	struct wsm_hdr *wsm;
-	size_t wsm_len;
-	int wsm_id;
-	u8 wsm_seq;
-	int rx_resync = 1;
-	u16 ctrl_reg = 0;
-	int tx_allowed;
-	int pending_tx = 0;
-	int tx_burst;
-	int rx_burst = 0;
-	long status;
-#if defined(CONFIG_BES2600_WSM_DUMPS)
-	size_t wsm_dump_max = -1;
-#endif
-	u32 dummy;
-	bool powersave_enabled;
-	int i;
-	int vif_selected;
-
-	for (;;) {
-		powersave_enabled = 1;
-		spin_lock(&hw_priv->vif_list_lock);
-		bes2600_for_each_vif(hw_priv, priv, i) {
-#ifdef P2P_MULTIVIF
-			if ((i = (CW12XX_MAX_VIFS - 1)) || !priv)
-#else
-			if (!priv)
-#endif
-				continue;
-			powersave_enabled &= !!priv->powersave_enabled;
-		}
-		spin_unlock(&hw_priv->vif_list_lock);
-		if (!hw_priv->hw_bufs_used
-				&& powersave_enabled
-				&& !hw_priv->device_can_sleep
-				&& !atomic_read(&hw_priv->recent_scan)) {
-			status = HZ/8;
-			bes_devel("[BH] No Device wakedown.\n");
-#ifndef FPGA_SETUP
-			WARN_ON(bes2600_reg_write_16(hw_priv,
-						ST90TDS_CONTROL_REG_ID, 0));
-			hw_priv->device_can_sleep = true;
-#endif
-		} else if (hw_priv->hw_bufs_used)
-			/* Interrupt loss detection */
-			status = HZ/8;
-		else
-			status = HZ/8;
-
-		/* Dummy Read for SDIO retry mechanism*/
-		if (((atomic_read(&hw_priv->bh_rx) == 0) &&
-				(atomic_read(&hw_priv->bh_tx) == 0)))
-			bes2600_reg_read(hw_priv, ST90TDS_CONFIG_REG_ID,
-					&dummy, sizeof(dummy));
-#if defined(CONFIG_BES2600_WSM_DUMPS_SHORT)
-		wsm_dump_max = hw_priv->wsm_dump_max_size;
-#endif /* CONFIG_BES2600_WSM_DUMPS_SHORT */
-
-#ifdef INTERRUPT_WORKAROUND
-				/* If a packet has already been txed to the device then read the
-				   control register for a probable interrupt miss before going
-				   further to wait for interrupt; if the read length is non-zero
-				   then it means there is some data to be received */
-				if (hw_priv->hw_bufs_used) {
-					bes2600_bh_read_ctrl_reg(hw_priv, &ctrl_reg);
-					if(ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK)
-					{
-						rx = 1;
-						goto test;
-					}
-				}
-#endif
-
-		status = wait_event_interruptible_timeout(hw_priv->bh_wq, ({
-				rx = atomic_xchg(&hw_priv->bh_rx, 0);
-				tx = atomic_xchg(&hw_priv->bh_tx, 0);
-				term = atomic_xchg(&hw_priv->bh_term, 0);
-				suspend = pending_tx ?
-					0 : atomic_read(&hw_priv->bh_suspend);
-				(rx || tx || term || suspend || hw_priv->bh_error);
-			}), status);
-
-		if (status < 0 || term || hw_priv->bh_error)
-			break;
-
-#ifdef INTERRUPT_WORKAROUND
-		if (!status) {
-			bes2600_bh_read_ctrl_reg(hw_priv, &ctrl_reg);
-			if(ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK)
-			{
-				bes_err("MISS 1\n");
-				rx = 1;
-				goto test;
-			}
-		}
-#endif
-		if (!status && hw_priv->hw_bufs_used) {
-			unsigned long timestamp = jiffies;
-			long timeout;
-			bool pending = false;
-			int i;
-
-			wiphy_warn(hw_priv->hw->wiphy, "Missed interrupt?\n");
-			rx = 1;
-
-			/* Get a timestamp of "oldest" frame */
-			for (i = 0; i < 4; ++i)
-				pending |= bes2600_queue_get_xmit_timestamp(
-						&hw_priv->tx_queue[i],
-						&timestamp, -1,
-						hw_priv->pending_frame_id);
-
-			/* Check if frame transmission is timed out.
-			 * Add an extra second with respect to possible
-			 * interrupt loss. */
-			timeout = timestamp +
-					WSM_CMD_LAST_CHANCE_TIMEOUT +
-					1 * HZ  -
-					jiffies;
-
-			/* And terminate BH tread if the frame is "stuck" */
-			if (pending && timeout < 0) {
-				//wiphy_warn(priv->hw->wiphy,
-				//	"Timeout waiting for TX confirm.\n");
-				bes_devel("bes2600_bh: Timeout waiting for TX confirm.\n");
-				break;
-			}
-
-#if defined(CONFIG_BES2600_DUMP_ON_ERROR)
-			BUG_ON(1);
-#endif /* CONFIG_BES2600_DUMP_ON_ERROR */
-		} else if (!status) {
-			if (!hw_priv->device_can_sleep
-					&& !atomic_read(&hw_priv->recent_scan)) {
-				bes_devel("[BH] Device wakedown. Timeout.\n");
-#ifndef FPGA_SETUP
-				WARN_ON(bes2600_reg_write_16(hw_priv,
-						ST90TDS_CONTROL_REG_ID, 0));
-				hw_priv->device_can_sleep = true;
-#endif
-			}
-			continue;
-		} else if (suspend) {
-			bes_devel("[BH] Device suspend.\n");
-			powersave_enabled = 1;
-			spin_lock(&hw_priv->vif_list_lock);
-			bes2600_for_each_vif(hw_priv, priv, i) {
-#ifdef P2P_MULTIVIF
-				if ((i = (CW12XX_MAX_VIFS - 1)) || !priv)
-#else
-				if (!priv)
-#endif
-					continue;
-				powersave_enabled &= !!priv->powersave_enabled;
-			}
-			spin_unlock(&hw_priv->vif_list_lock);
-			if (powersave_enabled) {
-				bes_devel("[BH] No Device wakedown. Suspend.\n");
-#ifndef FPGA_SETUP
-				WARN_ON(bes2600_reg_write_16(hw_priv,
-						ST90TDS_CONTROL_REG_ID, 0));
-				hw_priv->device_can_sleep = true;
-#endif
-			}
-
-			atomic_set(&hw_priv->bh_suspend, BES2600_BH_SUSPENDED);
-			wake_up(&hw_priv->bh_evt_wq);
-			status = wait_event_interruptible(hw_priv->bh_wq,
-					BES2600_BH_RESUME == atomic_read(
-						&hw_priv->bh_suspend));
-			if (status < 0) {
-				wiphy_err(hw_priv->hw->wiphy,
-					"%s: Failed to wait for resume: %ld.\n",
-					__func__, status);
-				break;
-			}
-			bes_devel("[BH] Device resume.\n");
-			atomic_set(&hw_priv->bh_suspend, BES2600_BH_RESUMED);
-			wake_up(&hw_priv->bh_evt_wq);
-			atomic_add(1, &hw_priv->bh_rx);
-			continue;
-		}
-
-test:
-		tx += pending_tx;
-		pending_tx = 0;
-
-		if (rx) {
-			size_t alloc_len;
-			u8 *data;
-
-#ifdef INTERRUPT_WORKAROUND
-			if(!(ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK))
-#endif
-			if (WARN_ON(bes2600_bh_read_ctrl_reg(
-					hw_priv, &ctrl_reg)))
-				break;
-rx:
-			read_len = (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) * 2;
-			if (!read_len) {
-				rx_burst = 0;
-				goto tx;
-			}
-
-			if (WARN_ON((read_len < sizeof(struct wsm_hdr)) ||
-					(read_len > EFFECTIVE_BUF_SIZE))) {
-				bes_devel("Invalid read len: %d", read_len);
-				break;
-			}
-
-			/* Add SIZE of PIGGYBACK reg (CONTROL Reg)
-			 * to the NEXT Message length + 2 Bytes for SKB */
-			read_len = read_len + 2;
-
-#if defined(CONFIG_BES2600_NON_POWER_OF_TWO_BLOCKSIZES)
-			alloc_len = hw_priv->sbus_ops->align_size(
-					hw_priv->sbus_priv, read_len);
-#else /* CONFIG_BES2600_NON_POWER_OF_TWO_BLOCKSIZES */
-			/* Platform's SDIO workaround */
-			alloc_len = read_len & ~(SDIO_BLOCK_SIZE - 1);
-			if (read_len & (SDIO_BLOCK_SIZE - 1))
-				alloc_len += SDIO_BLOCK_SIZE;
-#endif /* CONFIG_BES2600_NON_POWER_OF_TWO_BLOCKSIZES */
-
-			/* Check if not exceeding BES2600 capabilities */
-			if (WARN_ON_ONCE(alloc_len > EFFECTIVE_BUF_SIZE))
-				bes_devel("Read aligned len: %d\n", alloc_len);
-
-			skb_rx = bes2600_get_skb(hw_priv, alloc_len);
-			if (WARN_ON(!skb_rx))
-				break;
-
-			skb_trim(skb_rx, 0);
-			skb_put(skb_rx, read_len);
-			data = skb_rx->data;
-			if (WARN_ON(!data))
-				break;
-
-			if (WARN_ON(bes2600_data_read(hw_priv, data, alloc_len)))
-				break;
-
-			/* Piggyback */
-			ctrl_reg = __le16_to_cpu(
-				((__le16 *)data)[alloc_len / 2 - 1]);
-
-			wsm = (struct wsm_hdr *)data;
-			wsm_len = __le32_to_cpu(wsm->len);
-			if (WARN_ON(wsm_len > read_len))
-				break;
-
-#if defined(CONFIG_BES2600_WSM_DUMPS)
-			if (unlikely(hw_priv->wsm_enable_wsm_dumps)) {
-				u16 msgid, ifid;
-				u16 *p = (u16 *)data;
-				msgid = (*(p + 1)) & 0xC3F;
-				ifid  = (*(p + 1)) >> 6;
-				ifid &= 0xF;
-				bes_devel("[DUMP] <<< msgid 0x%.4X ifid %d len %d\n", msgid, ifid, *p);
-				print_hex_dump(KERN_DEBUG, "<-- ", DUMP_PREFIX_NONE, data, min(wsm_len, wsm_dump_max));
-			}
-#endif /* CONFIG_BES2600_WSM_DUMPS */
-
-			wsm_id  = __le32_to_cpu(wsm->id) & 0xFFF;
-			wsm_seq = (__le32_to_cpu(wsm->id) >> 13) & 7;
-
-			skb_trim(skb_rx, wsm_len);
-
-			if (unlikely(wsm_id == 0x0800)) {
-				wsm_handle_exception(hw_priv,
-					 &data[sizeof(*wsm)],
-					wsm_len - sizeof(*wsm));
-				break;
-			} else if (unlikely(!rx_resync)) {
-				if (WARN_ON(wsm_seq != hw_priv->wsm_rx_seq)) {
-#if defined(CONFIG_BES2600_DUMP_ON_ERROR)
-					BUG_ON(1);
-#endif /* CONFIG_BES2600_DUMP_ON_ERROR */
-					break;
-				}
-			}
-			hw_priv->wsm_rx_seq = (wsm_seq + 1) & 7;
-			rx_resync = 0;
-
-			if (wsm_id & 0x0400) {
-				int rc = wsm_release_tx_buffer(hw_priv, 1);
-				if (WARN_ON(rc < 0))
-					break;
-				else if (rc > 0)
-					tx = 1;
-			}
-
-			/* bes2600_wsm_rx takes care on SKB livetime */
-			if (WARN_ON(wsm_handle_rx(hw_priv, wsm_id, wsm,
-						  &skb_rx)))
-				break;
-
-			if (skb_rx) {
-				bes2600_put_skb(hw_priv, skb_rx);
-				skb_rx = NULL;
-			}
-
-			read_len = 0;
-
-			if (rx_burst) {
-				bes2600_debug_rx_burst(hw_priv);
-				--rx_burst;
-				goto rx;
-			}
-		}
-
-tx:
-		BUG_ON(hw_priv->hw_bufs_used > hw_priv->wsm_caps.numInpChBufs);
-		tx_burst = hw_priv->wsm_caps.numInpChBufs -
-			hw_priv->hw_bufs_used;
-		tx_allowed = tx_burst > 0;
-		if (tx && tx_allowed) {
-			size_t tx_len;
-			u8 *data;
-			int ret;
-
-			if (hw_priv->device_can_sleep) {
-				ret = bes2600_device_wakeup(hw_priv);
-				if (WARN_ON(ret < 0))
-					break;
-				else if (ret)
-					hw_priv->device_can_sleep = false;
-				else {
-					/* Wait for "awake" interrupt */
-					pending_tx = tx;
-					continue;
-				}
-			}
-
-			wsm_alloc_tx_buffer(hw_priv);
-			ret = wsm_get_tx(hw_priv, &data, &tx_len, &tx_burst,
-						&vif_selected);
-			if (ret <= 0) {
-				wsm_release_tx_buffer(hw_priv, 1);
-				if (WARN_ON(ret < 0))
-					break;
-			} else {
-				wsm = (struct wsm_hdr *)data;
-				BUG_ON(tx_len < sizeof(*wsm));
-				BUG_ON(__le32_to_cpu(wsm->len) != tx_len);
-
-#if 0 /* count is not implemented */
-				if (ret > 1)
-					atomic_add(1, &hw_priv->bh_tx);
-#else
-				atomic_add(1, &hw_priv->bh_tx);
-#endif
-
-#if defined(CONFIG_BES2600_NON_POWER_OF_TWO_BLOCKSIZES)
-				if (tx_len <= 8)
-					tx_len = 16;
-				tx_len = hw_priv->sbus_ops->align_size(
-						hw_priv->sbus_priv, tx_len);
-#else /* CONFIG_BES2600_NON_POWER_OF_TWO_BLOCKSIZES */
-				/* HACK!!! Platform limitation.
-				* It is also supported by upper layer:
-				* there is always enough space at the
-				* end of the buffer. */
-				if (tx_len & (SDIO_BLOCK_SIZE - 1)) {
-					tx_len &= ~(SDIO_BLOCK_SIZE - 1);
-					tx_len += SDIO_BLOCK_SIZE;
-				}
-#endif /* CONFIG_BES2600_NON_POWER_OF_TWO_BLOCKSIZES */
-
-				/* Check if not exceeding BES2600
-				    capabilities */
-				if (WARN_ON_ONCE(tx_len > EFFECTIVE_BUF_SIZE))
-					bes_devel("Write aligned len: %d\n", tx_len);
-
-				wsm->id &= __cpu_to_le32(
-						~WSM_TX_SEQ(WSM_TX_SEQ_MAX));
-				wsm->id |= cpu_to_le32(WSM_TX_SEQ(
-						hw_priv->wsm_tx_seq));
-
-				if (WARN_ON(bes2600_data_write(hw_priv,
-				    data, tx_len))) {
-					wsm_release_tx_buffer(hw_priv, 1);
-					break;
-				}
-
-				if (vif_selected != -1) {
-					hw_priv->hw_bufs_used_vif[
-							vif_selected]++;
-				}
-
-#if defined(CONFIG_BES2600_WSM_DUMPS)
-				if (unlikely(hw_priv->wsm_enable_wsm_dumps)) {
-					u16 msgid, ifid;
-					u16 *p = (u16 *)data;
-					msgid = (*(p + 1)) & 0x3F;
-					ifid  = (*(p + 1)) >> 6;
-					ifid &= 0xF;
-					if (msgid == 0x0006)
-						bes_devel("[DUMP] >>> msgid 0x%.4X ifid %d len %d MIB 0x%.4X\n", msgid, ifid, *p, *(p + 2));
-					else
-						bes_devel("[DUMP] >>> msgid 0x%.4X ifid %d len %d\n", msgid, ifid, *p);
-					print_hex_dump(KERN_DEBUG, "--> ", DUMP_PREFIX_NONE, data, min(__le32_to_cpu(wsm->len), wsm_dump_max));
-				}
-#endif /* CONFIG_BES2600_WSM_DUMPS */
-
-				wsm_txed(hw_priv, data);
-				hw_priv->wsm_tx_seq = (hw_priv->wsm_tx_seq + 1)
-						& WSM_TX_SEQ_MAX;
-
-				if (tx_burst > 1) {
-					bes2600_debug_tx_burst(hw_priv);
-					++rx_burst;
-					goto tx;
-				}
-			}
-		}
-
-		if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK)
-			goto rx;
-	}
-
-	if (skb_rx) {
-		bes2600_put_skb(hw_priv, skb_rx);
-		skb_rx = NULL;
-	}
-
-
-	if (!term) {
-		bes_devel("[BH] Fatal error, exitting.\n");
-#if defined(CONFIG_BES2600_DUMP_ON_ERROR)
-		BUG_ON(1);
-#endif /* CONFIG_BES2600_DUMP_ON_ERROR */
-		hw_priv->bh_error = 1;
-#if defined(CONFIG_BES2600_USE_STE_EXTENSIONS)
-		spin_lock(&hw_priv->vif_list_lock);
-		bes2600_for_each_vif(hw_priv, priv, i) {
-			if (!priv)
-				continue;
-			ieee80211_driver_hang_notify(priv->vif, GFP_KERNEL);
-		}
-		spin_unlock(&hw_priv->vif_list_lock);
-		bes2600_pm_stay_awake(&hw_priv->pm_state, 3*HZ);
-#endif
-		/* TODO: schedule_work(recovery) */
-#ifndef HAS_PUT_TASK_STRUCT
-		/* The only reason of having this stupid code here is
-		 * that __put_task_struct is not exported by kernel. */
-		for (;;) {
-			int status = wait_event_interruptible(hw_priv->bh_wq, ({
-				term = atomic_xchg(&hw_priv->bh_term, 0);
-				(term);
-				}));
-
-			if (status || term)
-				break;
-		}
-#endif
-	}
-	return 0;
-}
-#else
 
 extern int bes2600_bh_read_ctrl_reg(struct bes2600_common *priv, u32 *ctrl_reg);
 
@@ -958,6 +412,119 @@ static void bes2600_bh_parse_wakeup_event(struct bes2600_common *hw_priv, struct
 	}
 }
 
+/*
+ * Direct-deliver an RX SKB into the WSM/mac80211 stack.
+ *
+ * Patch C v3 (no-relay architecture, matches cw1200): the bh thread
+ * calls bes2600_sdio_read_rx_batch which calls
+ * bes2600_sdio_extract_packets which calls THIS function per parsed
+ * SKB.  No rx_queue, no sdio_rx_work, no inter-thread handoff.
+ *
+ * Single-writer-from-bh invariant on hw_priv->hw_bufs_used,
+ * hw_priv->hw_bufs_used_vif[] and hw_priv->wsm_tx_pending[] is
+ * preserved BY CONSTRUCTION — there is now only one writer (the bh
+ * thread itself), same as cw1200's design.  No atomic_t conversion
+ * needed.
+ *
+ * Contract:
+ *   - process context, sleepable.  wsm_handle_rx (wsm.c, EXPORT_SYMBOL)
+ *     acquires wsm_cmd.lock and may sleep on wait_event_timeout.
+ *   - caller holds no bes2600 spinlock.  bes2600_sdio_unlock(self) is
+ *     called inside read_rx_batch before extract_packets is invoked.
+ *   - SKB ownership: function frees on every path (success + error).
+ *   - No need to wake the bh thread on TX-confirm — we ARE the bh
+ *     thread; tx_burst is signalled by returning *tx_out = 1 to the
+ *     caller (bh_rx_helper), which propagates it to bh's outer loop.
+ */
+int bes2600_bh_handle_rx_skb(struct bes2600_common *priv, struct sk_buff *skb)
+{
+	struct wsm_hdr *wsm;
+	size_t wsm_len;
+	u16 wsm_id;
+	u8 wsm_seq;
+	int tx = 0;
+	u32 confirm_label = 0x0;
+
+	if (!skb)
+		return 0;
+
+	wsm = (struct wsm_hdr *)skb->data;
+	wsm_len = __le16_to_cpu(wsm->len);
+	if (WARN_ON(wsm_len > skb->len)) {
+		bes_err("wsm_len err %d %d\n", (int)wsm_len, (int)skb->len);
+		dev_kfree_skb(skb);
+		return -1;
+	}
+
+	if (priv->wsm_enable_wsm_dumps)
+		print_hex_dump(KERN_DEBUG, "<-- ", DUMP_PREFIX_NONE, 16, 1,
+			       skb->data, wsm_len, false);
+
+	wsm_id  = __le16_to_cpu(wsm->id) & 0xFFF;
+	wsm_seq = (__le16_to_cpu(wsm->id) >> 13) & 7;
+	bes_devel("bes2600_bh_handle_rx_skb wsm_id:0x%04x seq:%d\n",
+		  wsm_id, wsm_seq);
+
+	skb_trim(skb, wsm_len);
+
+	if (wsm_id == 0x0800) {
+		wsm_handle_exception(priv,
+				     &skb->data[sizeof(*wsm)],
+				     wsm_len - sizeof(*wsm));
+		bes_err("wsm exception\n");
+		dev_kfree_skb(skb);
+		return -1;
+	} else if ((wsm_seq != priv->wsm_rx_seq[WSM_TXRX_SEQ_IDX(wsm_id)])) {
+		bes_err("seq error! %u. %u. 0x%x.", wsm_seq,
+			priv->wsm_rx_seq[WSM_TXRX_SEQ_IDX(wsm_id)], wsm_id);
+		dev_kfree_skb(skb);
+		return -1;
+	}
+
+	bes2600_bh_parse_wakeup_event(priv, skb);
+
+	priv->wsm_rx_seq[WSM_TXRX_SEQ_IDX(wsm_id)] = (wsm_seq + 1) & 7;
+
+	if (IS_DRIVER_TO_MCU_CMD(wsm_id))
+		confirm_label = __le32_to_cpu(((struct wsm_mcu_hdr *)wsm)->handle_label);
+
+	if (WSM_CONFIRM_CONDITION(wsm_id, confirm_label)) {
+		int rc = wsm_release_tx_buffer(priv, 1);
+		bes2600_bh_dec_pending_count(priv, WSM_TXRX_SEQ_IDX(wsm->id));
+
+		if (rc < 0) {
+			bes_err("wsm_release_tx_buffer failed: %d\n", rc);
+			dev_kfree_skb(skb);
+			return rc;
+		} else if (rc > 0) {
+			tx = 1;
+		}
+	}
+
+	/* wsm_handle_rx takes care of SKB lifetime: zeroes *skb_p if consumed. */
+	if (wsm_handle_rx(priv, wsm_id, wsm, &skb)) {
+		bes_err("wsm_handle_rx failed (id=0x%04x)\n", wsm_id);
+		if (skb)
+			dev_kfree_skb(skb);
+		return -1;
+	}
+
+	if (skb)
+		dev_kfree_skb(skb);
+
+	/*
+	 * Signal "tx side has new headroom" via atomic so the bh outer
+	 * loop's wait_event predicate notices on its next wait.  No
+	 * cross-thread wake needed because we are the bh thread; the
+	 * outer loop will pick this up after read_rx_batch returns.
+	 */
+	if (tx)
+		atomic_inc(&priv->bh_tx);
+
+	return 0;
+}
+EXPORT_SYMBOL(bes2600_bh_handle_rx_skb);
+
 static int bes2600_bh_rx_helper(struct bes2600_common *priv, int *tx)
 {
 	struct sk_buff *skb = NULL;
@@ -969,10 +536,18 @@ static int bes2600_bh_rx_helper(struct bes2600_common *priv, int *tx)
 	u32 confirm_label = 0x0; /* wsm to mcu cmd cnfirm label */
 
 #if defined(BES_SDIO_RX_MULTIPLE_ENABLE)
-	skb = (struct sk_buff *)priv->sbus_ops->pipe_read(priv->sbus_priv);
+	/*
-	if (!skb)
+	 * Patch C v3: the bh thread does the SDIO read inline via
+	 * sbus_ops->bus_rx_batch.  bes2600_sdio_read_rx_batch reads the
+	 * multi-RX coalesced frames out of the chip and delivers each
+	 * one inline via bes2600_bh_handle_rx_skb (no rx_queue, no
+	 * pipe_read, no inter-thread handoff).  Return value: 0 on
+	 * success (bh outer loop will check whether to continue),
+	 * negative on read error.
+	 */
+	if (priv->sbus_ops->bus_rx_batch)
+		return priv->sbus_ops->bus_rx_batch(priv->sbus_priv);
 	return 0;
-	rx = 1; // always consider rx pipe not empty
 #else
 	u32 ctrl_reg = 0;
 	size_t read_len = 0;
@@ -1134,7 +709,7 @@ static int bes2600_bh_tx_helper(struct bes2600_common *hw_priv,
 	tx_len += 4;
 #endif
 
-	atomic_add(1, &hw_priv->bh_tx);
+	atomic_inc(&hw_priv->bh_tx);
 
 	tx_len = hw_priv->sbus_ops->align_size(
 		hw_priv->sbus_priv, tx_len);
@@ -1435,7 +1010,7 @@ static int bes2600_bh(void *arg)
 			bes_devel("[BH] Device resume.\n");
 			atomic_set(&hw_priv->bh_suspend, BES2600_BH_RESUMED);
 			wake_up(&hw_priv->bh_evt_wq);
-			atomic_add(1, &hw_priv->bh_rx);
+			atomic_inc(&hw_priv->bh_rx);
 			goto done;
 		}
 
@@ -1471,7 +1046,15 @@ static int bes2600_bh(void *arg)
 
 			tx = 0;
 
-			BUG_ON(hw_priv->hw_bufs_used > hw_priv->wsm_caps.numInpChBufs);
+			/*
+			 * Patch H: BUG_ON -> WARN_ON_ONCE in the steady-state
+			 * hot path.  The original BUG_ON ran every bh-loop
+			 * iteration; tripping it on a bookkeeping bug locks
+			 * the kernel up during normal operation, which is
+			 * the wrong response.  WARN_ON_ONCE surfaces the
+			 * issue without taking the system down.
+			 */
+			WARN_ON_ONCE(hw_priv->hw_bufs_used > hw_priv->wsm_caps.numInpChBufs);
 			tx_burst = hw_priv->wsm_caps.numInpChBufs - hw_priv->hw_bufs_used;
 			tx_allowed = tx_burst > 0;
 
@@ -1515,18 +1098,19 @@ static int bes2600_bh(void *arg)
 			goto tx;
 
 	done:
-		/* Re-enable device interrupts */
+		/*
-		//hw_priv->sbus_ops->lock(hw_priv->sbus_priv);
+		 * Patch H: dropped the dead `__bes2600_irq_enable(1)` /
-		//__bes2600_irq_enable(1);
+		 * `asm volatile("nop")` placeholder that used to sit here.
-		//hw_priv->sbus_ops->unlock(hw_priv->sbus_priv);
+		 * `__bes2600_irq_enable()` is a stub that returns 0 on
-		asm volatile ("nop");
+		 * bes2600 silicon — the IRQ is managed by sdio_claim_irq
+		 * and chip-side firmware, not by a driver-side enable bit.
+		 * (cw1200 inherited the function from a different chip
+		 * shape; bes2600 kept the stub but the call sites are
+		 * meaningless.)
+		 */
+		;
 	}
 
-	/* Explicitly disable device interrupts */
-	hw_priv->sbus_ops->lock(hw_priv->sbus_priv);
-	__bes2600_irq_enable(0);
-	hw_priv->sbus_ops->unlock(hw_priv->sbus_priv);
-
 	if (!term) {
 		bes_err("[BH] Fatal error, exiting.\n");
 		sdio_work_debug(hw_priv->sbus_priv);
@@ -1535,4 +1119,3 @@ static int bes2600_bh(void *arg)
 	}
 	return 0;
 }
-#endif

bes2600/bh.h

@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Device handling thread interface for mac80211 BES2600 drivers
+ * Bottom-half thread interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_BH_H
@@ -39,6 +39,15 @@ int wsm_release_vif_tx_buffer(struct bes2600_common *hw_priv, int if_id,
 int bes2600_bh_sw_process(struct bes2600_common *hw_priv,
 			 struct wsm_tx_confirm *tx_confirm);
 
+/*
+ * Direct-deliver an RX SKB into the WSM/mac80211 stack from the bh thread.
+ * Called by bes2600_sdio_extract_packets per RX frame, no queueing.
+ * Process context, sleepable, caller holds no bes2600 spinlock.
+ * Function frees skb on every path. See bh.c for full contract.
+ */
+int bes2600_bh_handle_rx_skb(struct bes2600_common *hw_priv,
+			     struct sk_buff *skb);
+
 void bes2600_bh_inc_pending_count(struct bes2600_common *hw_priv, int idx);
 void bes2600_bh_dec_pending_count(struct bes2600_common *hw_priv, int idx);
 

bes2600/debug.c

@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Debugging interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
@@ -110,17 +110,20 @@ static int bes2600_status_show_common(struct seq_file *seq, void *v)
 	int ba_cnt, ba_acc, ba_cnt_rx, ba_acc_rx, ba_avg = 0, ba_avg_rx = 0;
 	bool ba_ena;
 
-	spin_lock_bh(&hw_priv->ba_lock);
+	/*
+	 * Patch D: ba_lock removed.  hw_priv->debug->ba_* are written only
+	 * by the timer callback (single writer); reading without a lock is
+	 * fine for stats.  ba_ena is atomic_t.
+	 */
 	ba_cnt    = hw_priv->debug->ba_cnt;
 	ba_acc    = hw_priv->debug->ba_acc;
 	ba_cnt_rx = hw_priv->debug->ba_cnt_rx;
 	ba_acc_rx = hw_priv->debug->ba_acc_rx;
-	ba_ena = hw_priv->ba_ena;
+	ba_ena    = !!atomic_read(&hw_priv->ba_ena);
 	if (ba_cnt)
 		ba_avg = ba_acc / ba_cnt;
 	if (ba_cnt_rx)
 		ba_avg_rx = ba_acc_rx / ba_cnt_rx;
-	spin_unlock_bh(&hw_priv->ba_lock);
 
 	seq_puts(seq,   "BES2600 Wireless LAN driver status\n");
 	seq_printf(seq, "Hardware:   %d.%d\n",

bes2600/debug.h

@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * DebugFS code for BES2600 mac80211 driver
+ * Debugging interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2011, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_DEBUG_H_INCLUDED

bes2600/epta_coex.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * BT/WiFi coexistence (ePTA) for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/types.h>
 #include <linux/version.h>

bes2600/epta_coex.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * BT/WiFi coexistence interface for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef __EPTA_COEX_H__
 #define __EPTA_COEX_H__

bes2600/epta_request.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * BT/WiFi coexistence request handling
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/types.h>
 #include <linux/kernel.h>

bes2600/epta_request.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * BT/WiFi coexistence request interface
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef EPTA_REQUEST_H
 #define EPTA_REQUEST_H

bes2600/fwio.c

@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Firmware I/O for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/init.h>

bes2600/fwio.h

@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * Firmware I/O interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef FWIO_H_INCLUDED
 #define FWIO_H_INCLUDED

bes2600/ht.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  HT-related code for BES2600 driver
+ * HT capability config for BES2600
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_HT_H_INCLUDED

bes2600/hwio.c

@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Low-level device IO routines for BES2600 drivers
+ * Low-level device I/O for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/types.h>
@@ -324,7 +324,10 @@ out:
 }
 #endif
 
-int __bes2600_irq_enable(int enable)
+/*
-{
+ * Patch H: __bes2600_irq_enable stub removed.  It was a no-op
-	return 0;
+ * (always returned 0) inherited from cw1200 where the analogous
-}
+ * function manipulates the chip's IRQ-enable register.  bes2600
+ * silicon manages SDIO IRQ via sdio_claim_irq and chip-side
+ * firmware — there is no driver-side enable register to write.
+ */

bes2600/hwio.h

@@ -1,17 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Low-level API for mac80211 BES2600 drivers
+ * Low-level device I/O interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
  *
- * Based on:
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * UMAC BES2600 driver which is
- * Copyright (c) 2010, Bestechnic
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_HWIO_H_INCLUDED

bes2600/itp.c

@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * mac80211 glue code for mac80211 BES2600 drivers
+ * ITP (in-band test mode) for BES2600
- * ITP code
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
@@ -570,7 +566,7 @@ int bes2600_itp_get_tx(struct bes2600_common *priv, u8 **data,
 	*burst = 2;
 	atomic_set(&priv->bh_tx, 1);
 	ktime_get_ts(&itp->last_sent);
-	atomic_add(1, &itp->awaiting_confirm);
+	atomic_inc(&itp->awaiting_confirm);
 	spin_unlock_bh(&itp->tx_lock);
 	return 1;
 

bes2600/itp.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * ITP code for BES2600 mac80211 driver
+ * ITP interface for BES2600
  *
- * Copyright (c) 2011, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_ITP_H_INCLUDED

bes2600/main.c

@@ -1,12 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Main entry/init for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
+ *
+ * Based on the mac80211 Prism54 code, which is
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ *
+ * Based on the islsm (softmac prism54) driver, which is
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
@@ -490,13 +496,14 @@ static struct ieee80211_hw *bes2600_init_common(size_t hw_priv_data_len)
 	INIT_LIST_HEAD(&hw_priv->event_queue);
 	INIT_WORK(&hw_priv->event_handler, bes2600_event_handler);
 	INIT_WORK(&hw_priv->ba_work, bes2600_ba_work);
-	spin_lock_init(&hw_priv->ba_lock);
+	/* Patch D: ba_lock removed; ba_acc/ba_cnt/etc are atomic_t. */
 	timer_setup(&hw_priv->ba_timer, bes2600_ba_timer, 0);
 
 	if (unlikely(bes2600_queue_stats_init(&hw_priv->tx_queue_stats,
 			WLAN_LINK_ID_MAX,
 			bes2600_skb_dtor,
 			hw_priv))) {
+		destroy_workqueue(hw_priv->workqueue);
 		ieee80211_free_hw(hw);
 		return NULL;
 	}
@@ -508,6 +515,7 @@ static struct ieee80211_hw *bes2600_init_common(size_t hw_priv_data_len)
 			for (; i > 0; i--)
 				bes2600_queue_deinit(&hw_priv->tx_queue[i - 1]);
 			bes2600_queue_stats_deinit(&hw_priv->tx_queue_stats);
+			destroy_workqueue(hw_priv->workqueue);
 			ieee80211_free_hw(hw);
 			return NULL;
 		}

bes2600/pm.c

@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 power management API for BES2600 drivers
+ * Power management for BES2600 mac80211 driver
  *
- * Copyright (c) 2011, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/platform_device.h>

bes2600/pm.h

@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 power management interface for BES2600 mac80211 drivers
+ * Power management interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2011, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef PM_H_INCLUDED

bes2600/queue.c

@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * O(1) TX queue with built-in allocator for BES2600 drivers
+ * O(1) TX queue for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <net/mac80211.h>
@@ -829,19 +829,19 @@ int bes2600_queue_get_skb(struct bes2600_queue *queue, u32 packetID,
 	bes2600_queue_parse_id(packetID, &queue_generation, &queue_id,
 				&item_generation, &item_id, &if_id, &link_id);
 
-	spin_lock(&queue->stats->hw_priv->tx_loop.pending_record_lock);
+	spin_lock_bh(&queue->stats->hw_priv->tx_loop.pending_record_lock);
 	if (!list_empty(&queue->stats->hw_priv->tx_loop.pending_record_list)) {
 		list_for_each_entry_safe(record_item, temp_record_item, &queue->stats->hw_priv->tx_loop.pending_record_list, head) {
 			if (record_item->packetID == packetID) {
 				list_del(&record_item->head);
 				dev_kfree_skb(record_item->skb);
 				kfree(record_item);
-				spin_unlock(&queue->stats->hw_priv->tx_loop.pending_record_lock);
+				spin_unlock_bh(&queue->stats->hw_priv->tx_loop.pending_record_lock);
 				return -EINVAL;
 			}
 		}
 	}
-	spin_unlock(&queue->stats->hw_priv->tx_loop.pending_record_lock);
+	spin_unlock_bh(&queue->stats->hw_priv->tx_loop.pending_record_lock);
 
 	item = &queue->pool[item_id];
 

bes2600/queue.h

@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * O(1) TX queue with built-in allocator for BES2600 drivers
+ * O(1) TX queue interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_QUEUE_H_INCLUDED

bes2600/sbus.h

@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Common sbus abstraction layer interface for bes2600 wireless driver
+ * Bus abstraction interface for BES2600
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
+ * Replaces hwbus.h from drivers/net/wireless/st/cw1200/
+ * Copyright (c) 2010, ST-Ericsson
  *
- * Copyright (c) 2010, Bestechnic
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_SBUS_H
@@ -83,11 +83,18 @@ struct sbus_ops {
 	 * Returns 0 on success or a negative errno.
 	 */
 	int (*bus_reset)(struct sbus_priv *self);
+	/*
+	 * Read a batch of RX frames inline from the bus and deliver each
+	 * one via bes2600_bh_handle_rx_skb().  Called from the bh thread
+	 * (process context, sleepable).  Replaces the
+	 * sdio_rx_work + rx_queue + pipe_read relay (Patch C v3, 2026).
+	 * Returns 0 on success, negative on read error.
+	 */
+	int (*bus_rx_batch)(struct sbus_priv *self);
 };
 
 void bes2600_irq_handler(struct bes2600_common *priv);
 
-/* This MUST be wrapped with hwbus_ops->lock/unlock! */
+/* Patch H: __bes2600_irq_enable removed (was a stub). */
-int __bes2600_irq_enable(int enable);
 
 #endif /* BES2600_SBUS_H */

bes2600/scan.c

@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Scan implementation for BES2600 mac80211 drivers
+ * Scan implementation for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/sched.h>
@@ -238,6 +238,36 @@ int bes2600_hw_scan(struct ieee80211_hw *hw,
 	/* Scan when P2P_GO corrupt firmware MiniAP mode */
 	if (priv->join_status == BES2600_JOIN_STATUS_AP)
 		return -EOPNOTSUPP;
+
+	/*
+	 * Firmware refuses WSM start-scan for 5 GHz with status 2 ("rejected
+	 * by policy"); see besser issue #1.  mac80211 splits multi-band
+	 * hw_scan requests per-band when the driver does not set
+	 * IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS (we don't -- see
+	 * ieee80211_hw_set() calls in bes2600_main.c), so each per-band call
+	 * has req->channels[] from one band only (see ieee80211_prep_hw_scan
+	 * in net/mac80211/scan.c).  Refuse the 5 GHz iteration at the driver
+	 * boundary so userspace gets a clean aborted-scan for that portion
+	 * rather than waiting for the firmware reject to cascade up.
+	 *
+	 * Only the multi-channel case is refused (n_channels > 1): that's
+	 * the per-band-sweep pattern mac80211 issues internally and the
+	 * one that triggers the firmware storm at the per-band loop
+	 * boundary.  Single-channel 5 GHz scans (BSS verification, NM's
+	 * per-freq iteration when 802-11-wireless.band=a is set) pass
+	 * through to firmware, which generally accepts them since the
+	 * storm is the back-to-back per-band issue, not a blanket 5 GHz
+	 * reject.  This preserves 5 GHz association via the
+	 * "wpa_supplicant iterates freq_list per channel" path.
+	 *
+	 * Contract: per include/net/mac80211.h struct ieee80211_ops.hw_scan
+	 * documentation, a negative return aborts the scan without requiring
+	 * ieee80211_scan_completed().
+	 */
+	if (req->n_channels > 1 &&
+	    req->channels[0]->band == NL80211_BAND_5GHZ)
+		return -EOPNOTSUPP;
+
 #if 0
 	if (work_pending(&priv->offchannel_work) ||
 			(hw_priv->roc_if_id != -1)) {
@@ -257,18 +287,21 @@ int bes2600_hw_scan(struct ieee80211_hw *hw,
 
 	bes2600_pwr_set_busy_event(hw_priv, BES_PWR_LOCK_ON_SCAN);
 
-	frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
-		req->ie_len);
-	if (!frame.skb)
-		return -ENOMEM;
-
-	if (req->ie_len)
-		skb_put_data(frame.skb, req->ie, req->ie_len);
-
 	/* will be unlocked in bes2600_scan_work() */
 	down(&hw_priv->scan.lock);
 	down(&hw_priv->conf_lock);
 
+	frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
+		req->ie_len);
+	if (!frame.skb) {
+		up(&hw_priv->conf_lock);
+		up(&hw_priv->scan.lock);
+		return -ENOMEM;
+	}
+
+	if (req->ie_len)
+		skb_put_data(frame.skb, req->ie, req->ie_len);
+
 	if (frame.skb) {
 		int ret;
 		//if (priv->if_id == 0)
@@ -286,9 +319,9 @@ int bes2600_hw_scan(struct ieee80211_hw *hw,
 		}
 #endif
 		if (ret) {
+			dev_kfree_skb(frame.skb);
 			up(&hw_priv->conf_lock);
 			up(&hw_priv->scan.lock);
-			dev_kfree_skb(frame.skb);
 			return ret;
 		}
 	}
@@ -318,10 +351,10 @@ int bes2600_hw_scan(struct ieee80211_hw *hw,
 		++hw_priv->scan.n_ssids;
 	}
 
-	up(&hw_priv->conf_lock);
-
 	if (frame.skb)
 		dev_kfree_skb(frame.skb);
+
+	up(&hw_priv->conf_lock);
 #ifdef WIFI_BT_COEXIST_EPTA_ENABLE
 	bwifi_change_current_status(hw_priv, BWIFI_STATUS_SCANNING);
 #endif
@@ -362,14 +395,18 @@ int bes2600_hw_sched_scan_start(struct ieee80211_hw *hw,
 	if (req->n_ssids > hw->wiphy->max_scan_ssids)
 		return -EINVAL;
 
-	frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
-		req->ie_len);
-	if (!frame.skb)
-		return -ENOMEM;
-
 	/* will be unlocked in bes2600_scan_work() */
 	down(&hw_priv->scan.lock);
 	down(&hw_priv->conf_lock);
+
+	frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
+		req->ie_len);
+	if (!frame.skb) {
+		up(&hw_priv->conf_lock);
+		up(&hw_priv->scan.lock);
+		return -ENOMEM;
+	}
+
 	if (frame.skb) {
 		int ret;
 		if (priv->if_id == 0)
@@ -380,9 +417,9 @@ int bes2600_hw_sched_scan_start(struct ieee80211_hw *hw,
 			ret = wsm_set_probe_responder(priv, true);
 		}
 		if (ret) {
+			dev_kfree_skb(frame.skb);
 			up(&hw_priv->conf_lock);
 			up(&hw_priv->scan.lock);
-			dev_kfree_skb(frame.skb);
 			return ret;
 		}
 	}
@@ -414,10 +451,10 @@ int bes2600_hw_sched_scan_start(struct ieee80211_hw *hw,
 		}
 	}
 
-	up(&hw_priv->conf_lock);
-
 	if (frame.skb)
 		dev_kfree_skb(frame.skb);
+
+	up(&hw_priv->conf_lock);
 	queue_work(hw_priv->workqueue, &hw_priv->scan.swork);
 	wiphy_warn(hw->wiphy, "<--[SCAN] Scheduled scan request.\n");
 	return 0;

bes2600/scan.h

@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Scan interface for BES2600 mac80211 drivers
+ * Scan interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef SCAN_H_INCLUDED

bes2600/sta.c

@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 STA API for BES2600 drivers
+ * Mac80211 STA API for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/vmalloc.h>
@@ -1484,7 +1484,7 @@ void bes2600_event_handler(struct work_struct *work)
 						IEEE80211_STYPE_DEAUTH | IEEE80211_FCTL_TODS);
 				deauth->u.deauth.reason_code = WLAN_REASON_DEAUTH_LEAVING;
 				deauth->seq_ctrl = 0;
-				ieee80211_rx_irqsafe(priv->hw, skb);
+				ieee80211_rx_ni(priv->hw, skb);
 				bes_devel(" Inactivity Deauth Frame sent for MAC SA %pM \t and DA %pM\n", deauth->sa, deauth->da);
 				queue_work(priv->hw_priv->workqueue, &priv->set_tim_work);
 				break;
@@ -2342,14 +2342,19 @@ void bes2600_join_work(struct work_struct *work)
 		//WARN_ON(wsm_reset(hw_priv, &reset, priv->if_id));
 		WARN_ON(wsm_set_block_ack_policy(hw_priv,
 			0, hw_priv->ba_tid_mask, priv->if_id));
-		spin_lock_bh(&hw_priv->ba_lock);
+		/*
-		hw_priv->ba_ena = false;
+		 * Patch D: ba_lock removed.  Disconnect-reset clears the
-		hw_priv->ba_cnt = 0;
+		 * counters and the arm flag; producers racing here cannot
-		hw_priv->ba_acc = 0;
+		 * cause harm — at worst they re-arm the timer and bump
+		 * counters that will be cleared on the next timer tick.
+		 */
+		atomic_set(&hw_priv->ba_ena, 0);
+		atomic_set(&hw_priv->ba_cnt, 0);
+		atomic_set(&hw_priv->ba_acc, 0);
 		hw_priv->ba_hist = 0;
-		hw_priv->ba_cnt_rx = 0;
+		atomic_set(&hw_priv->ba_cnt_rx, 0);
-		hw_priv->ba_acc_rx = 0;
+		atomic_set(&hw_priv->ba_acc_rx, 0);
-		spin_unlock_bh(&hw_priv->ba_lock);
+		atomic_set(&hw_priv->ba_armed, 0);
 
 		mgmt_policy.protectedMgmtEnable = 0;
 		mgmt_policy.unprotectedMgmtFramesAllowed = 1;
@@ -2629,10 +2634,11 @@ void bes2600_ba_work(struct work_struct *work)
 		return;*/
 
 	bes_devel("BA work****\n");
-	spin_lock_bh(&hw_priv->ba_lock);
+	/*
-//	tx_ba_tid_mask = hw_priv->ba_ena ? hw_priv->ba_tid_mask : 0;
+	 * Patch D: ba_lock removed.  ba_tid_mask is u8 set once at init
+	 * (main.c); reading it without a lock is fine.
+	 */
 	tx_ba_tid_mask = hw_priv->ba_tid_mask;
-	spin_unlock_bh(&hw_priv->ba_lock);
 
 	wsm_lock_tx(hw_priv);
 
@@ -2645,37 +2651,49 @@ void bes2600_ba_work(struct work_struct *work)
 void bes2600_ba_timer(struct timer_list *t)
 {
 	bool ba_ena;
+	int cnt, acc, cnt_rx, acc_rx;
 	struct bes2600_common *hw_priv = from_timer(hw_priv, t, ba_timer);
 
-	spin_lock_bh(&hw_priv->ba_lock);
+	/*
-	bes2600_debug_ba(hw_priv, hw_priv->ba_cnt, hw_priv->ba_acc,
+	 * Patch D: ba_lock removed.  Snapshot atomic counters into locals
-			hw_priv->ba_cnt_rx, hw_priv->ba_acc_rx);
+	 * for the predicate evaluation; producers may race incrementing
+	 * after the snapshot but the resulting decision is approximate
+	 * which the policy already tolerates (next timer tick re-evaluates).
+	 */
+	cnt    = atomic_read(&hw_priv->ba_cnt);
+	acc    = atomic_read(&hw_priv->ba_acc);
+	cnt_rx = atomic_read(&hw_priv->ba_cnt_rx);
+	acc_rx = atomic_read(&hw_priv->ba_acc_rx);
+
+	bes2600_debug_ba(hw_priv, cnt, acc, cnt_rx, acc_rx);
 
 	if (atomic_read(&hw_priv->scan.in_progress)) {
-		hw_priv->ba_cnt = 0;
+		atomic_set(&hw_priv->ba_cnt, 0);
-		hw_priv->ba_acc = 0;
+		atomic_set(&hw_priv->ba_acc, 0);
-		hw_priv->ba_cnt_rx = 0;
+		atomic_set(&hw_priv->ba_cnt_rx, 0);
-		hw_priv->ba_acc_rx = 0;
+		atomic_set(&hw_priv->ba_acc_rx, 0);
-		goto skip_statistic_update;
+		atomic_set(&hw_priv->ba_armed, 0);
+		return;
 	}
 
-	if (hw_priv->ba_cnt >= BES2600_BLOCK_ACK_CNT &&
+	if (cnt >= BES2600_BLOCK_ACK_CNT &&
-		(hw_priv->ba_acc / hw_priv->ba_cnt >= BES2600_BLOCK_ACK_THLD ||
+		(acc / cnt >= BES2600_BLOCK_ACK_THLD ||
-		(hw_priv->ba_cnt_rx >= BES2600_BLOCK_ACK_CNT &&
+		(cnt_rx >= BES2600_BLOCK_ACK_CNT &&
-		hw_priv->ba_acc_rx / hw_priv->ba_cnt_rx >=
+		acc_rx / cnt_rx >=
 			BES2600_BLOCK_ACK_THLD)))
 		ba_ena = true;
 	else
 		ba_ena = false;
 
-	hw_priv->ba_cnt = 0;
+	atomic_set(&hw_priv->ba_cnt, 0);
-	hw_priv->ba_acc = 0;
+	atomic_set(&hw_priv->ba_acc, 0);
-	hw_priv->ba_cnt_rx = 0;
+	atomic_set(&hw_priv->ba_cnt_rx, 0);
-	hw_priv->ba_acc_rx = 0;
+	atomic_set(&hw_priv->ba_acc_rx, 0);
+	atomic_set(&hw_priv->ba_armed, 0);
 
-	if (ba_ena != hw_priv->ba_ena) {
+	if (ba_ena != !!atomic_read(&hw_priv->ba_ena)) {
 		if (ba_ena || ++hw_priv->ba_hist >= BES2600_BLOCK_ACK_HIST) {
-			hw_priv->ba_ena = ba_ena;
+			atomic_set(&hw_priv->ba_ena, ba_ena ? 1 : 0);
 			hw_priv->ba_hist = 0;
 #if 0
 			bes_devel("[STA] %s block ACK:\n",
@@ -2685,9 +2703,6 @@ void bes2600_ba_timer(struct timer_list *t)
 		}
 	} else if (hw_priv->ba_hist)
 		--hw_priv->ba_hist;
-
-skip_statistic_update:
-	spin_unlock_bh(&hw_priv->ba_lock);
 }
 
 int bes2600_vif_setup(struct bes2600_vif *priv)

bes2600/sta.h

@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 STA interface for BES2600 mac80211 drivers
+ * Mac80211 STA API interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/version.h>
 #ifndef STA_H_INCLUDED

bes2600/tx_loop.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * Test-mode TX loopback for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include "bes2600.h"
 #include "wsm.h"
@@ -112,9 +109,9 @@ void bes2600_tx_loop_set_enable(struct bes2600_common *hw_priv, bool need_warn)
                 bes2600_queue_iterate_pending_packet(&hw_priv->tx_queue[i],
 				                bes2600_tx_loop_item_pending_item);
         }
-	spin_lock(&hw_priv->tx_loop.pending_record_lock);
+	spin_lock_bh(&hw_priv->tx_loop.pending_record_lock);
         bes2600_queue_iterate_record_pending_packet(hw_priv, bes2600_tx_loop_item_pending_item);
-	spin_unlock(&hw_priv->tx_loop.pending_record_lock);
+	spin_unlock_bh(&hw_priv->tx_loop.pending_record_lock);
 
         if (atomic_read(&hw_priv->bh_rx) > 0)
 		wake_up(&hw_priv->bh_wq);

bes2600/tx_loop.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Mac80211 driver for BES2600 device
+ * Test-mode TX loopback interface for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef __TX_LOOP_H__
 #define __TX_LOOP_H__

bes2600/txrx.c

@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Datapath implementation for BES2600 mac80211 drivers
+ * Datapath implementation for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <net/mac80211.h>
@@ -995,14 +995,18 @@ bes2600_tx_h_ba_stat(struct bes2600_vif *priv,
 	if (!ieee80211_is_data(t->hdr->frame_control))
 		return;
 
-	spin_lock_bh(&hw_priv->ba_lock);
+	/*
-	hw_priv->ba_acc += t->skb->len - t->hdrlen;
+	 * Patch D: lock-free hot-path BA accounting.  atomic_inc + atomic_add
-	if (!(hw_priv->ba_cnt_rx || hw_priv->ba_cnt)) {
+	 * each per-frame; the once-per-window timer-arm uses cmpxchg on
+	 * ba_armed so concurrent TX/RX can't both try to set the timer and
+	 * we don't need cross-counter coherency on the ba_cnt/ba_cnt_rx pair.
+	 */
+	atomic_add(t->skb->len - t->hdrlen, &hw_priv->ba_acc);
+	atomic_inc(&hw_priv->ba_cnt);
+	if (atomic_cmpxchg(&hw_priv->ba_armed, 0, 1) == 0) {
 		mod_timer(&hw_priv->ba_timer,
 			jiffies + BES2600_BLOCK_ACK_INTERVAL);
 	}
-	hw_priv->ba_cnt++;
-	spin_unlock_bh(&hw_priv->ba_lock);
 }
 
 static int
@@ -1629,14 +1633,13 @@ bes2600_rx_h_ba_stat(struct bes2600_vif *priv,
 	if (!priv->setbssparams_done)
 		return;
 
-	spin_lock_bh(&hw_priv->ba_lock);
+	/* Patch D: lock-free hot-path BA accounting; see TX side comment. */
-	hw_priv->ba_acc_rx += skb_len - hdrlen;
+	atomic_add(skb_len - hdrlen, &hw_priv->ba_acc_rx);
-	if (!(hw_priv->ba_cnt_rx || hw_priv->ba_cnt)) {
+	atomic_inc(&hw_priv->ba_cnt_rx);
+	if (atomic_cmpxchg(&hw_priv->ba_armed, 0, 1) == 0) {
 		mod_timer(&hw_priv->ba_timer,
 			jiffies + BES2600_BLOCK_ACK_INTERVAL);
 	}
-	hw_priv->ba_cnt_rx++;
-	spin_unlock_bh(&hw_priv->ba_lock);
 }
 
 void bes2600_rx_cb(struct bes2600_vif *priv,
@@ -1939,15 +1942,33 @@ void bes2600_rx_cb(struct bes2600_vif *priv,
 	if (unlikely(bes2600_itp_rxed(hw_priv, skb)))
 		consume_skb(skb);
 	else if (unlikely(early_data)) {
+		/*
+		 * Patch E: when c7 has latched pm_unsupported (firmware
+		 * doesn't honour PSM, see feedback_bes2600_firmware_no_psm),
+		 * AP-side power-save state machine is dead and link entries
+		 * never transition to BES2600_LINK_SOFT.  The double-check
+		 * branch under ps_state_lock is unreachable in that case,
+		 * so skip the per-frame lock acquisition entirely and
+		 * deliver to mac80211 directly.
+		 *
+		 * On firmware that does honour PSM (the latch self-clears
+		 * if a real PM_INDICATION ever arrives — see c7), this
+		 * predicate flips back to false and the original locked
+		 * path is taken.
+		 */
+		if (hw_priv->bes_power.pm_unsupported) {
+			ieee80211_rx_ni(priv->hw, skb);
+		} else {
 			spin_lock_bh(&priv->ps_state_lock);
 			/* Double-check status with lock held */
 			if (entry->status == BES2600_LINK_SOFT)
 				skb_queue_tail(&entry->rx_queue, skb);
 			else
-			ieee80211_rx_irqsafe(priv->hw, skb);
+				ieee80211_rx_ni(priv->hw, skb);
 			spin_unlock_bh(&priv->ps_state_lock);
+		}
 	} else {
-		ieee80211_rx_irqsafe(priv->hw, skb);
+		ieee80211_rx_ni(priv->hw, skb);
 	}
 	*skb_p = NULL;
 

bes2600/txrx.h

@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Datapath interface for BES2600 mac80211 drivers
+ * Datapath interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2010, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_TXRX_H

bes2600/wifi_testmode_cmd.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Mac80211 driver for BES2600 device
+ * WiFi testmode commands for BES2600
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Author:
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifdef CONFIG_BES2600_TESTMODE
 #include <net/netlink.h>

bes2600/wsm.c

@@ -1,13 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * WSM host interface (HI) implementation for
+ * WSM host interface for BES2600 mac80211 driver
- * BES2600 mac80211 drivers.
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/skbuff.h>
@@ -2413,7 +2412,7 @@ int wsm_handle_rx(struct bes2600_common *hw_priv, int id,
 					if (!hw_priv->beacon_bkp)
 						hw_priv->beacon_bkp = \
 						skb_copy(hw_priv->beacon, GFP_ATOMIC);
-					ieee80211_rx_irqsafe(hw_priv->hw, hw_priv->beacon);
+					ieee80211_rx_ni(hw_priv->hw, hw_priv->beacon);
 					hw_priv->beacon = hw_priv->beacon_bkp;
 
 					hw_priv->beacon_bkp = NULL;

bes2600/wsm.h

@@ -1,16 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * WSM host interface (HI) interface for BES2600 mac80211 drivers
+ * WSM host interface for BES2600 mac80211 driver
  *
- * Copyright (c) 2022, Bestechnic
+ * Copyright (c) 2010, ST-Ericsson
- * Author:
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
  *
- * Based on BES2600 UMAC WSM API, which is
+ * Copyright (c) 2022, Bestechnic (Beijing) Co., Ltd.
- * Copyright (C) SA 2010
- * Author: Stewart Mathers <stewart.mathers@stericsson.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef BES2600_WSM_H_INCLUDED