bes2600: default STANDARD_FACTORY_EFUSE_FLAG off for PineTab2 factory.txt format

The shipped factory calibration file bes2600_factory.txt on PineTab2
(danctnix linux-firmware 0.3.5_2023.0209) contains 30 calibration
fields: head (3), iq/xtal (3), 2.4G power 11n (5), 5G power 11n (15),
bt (4). The file terminates with '%%\n' directly after edr_power.

When STANDARD_FACTORY_EFUSE_FLAG is defined at compile time the driver
assembles STANDARD_FACTORY with an extra select_efuse_flag section
appended and expects 31 sscanf matches (FACTORY_MEMBER_NUM=31):

    __STANDARD_FACTORY + \"##select_efuse_flag\\nselect_efuse:%hx\\n\"
                      + \"%%%%\\n\"

The PineTab2 factory.txt has no select_efuse_flag section, so sscanf
stops after field 30 and factory_parse() returns -1 with:

    bes2600_factory.txt parse fail
    read and check bes2600/bes2600_factory.txt error
    factory cali data get failed.

This was latent until the preceding patch (use request_firmware() for
factory.txt read) fixed the path bug that masked the parse failure.

Default STANDARD_FACTORY_EFUSE_FLAG to n. The flag remains overridable
at build time (make STANDARD_FACTORY_EFUSE_FLAG=y ...) for chips /
firmware packages that do ship the select_efuse_flag section.

Also: the wsm_save_factory_txt_to_mcu() prototype in wsm.h was
inconsistently wrapped in a conditional that keyed on
STANDARD_FACTORY_EFUSE_FLAG, but the function definition in wsm.c and
the call site in sta.c are ungated. With the flag now defaulting to
n, the gcc -Werror=missing-prototypes flag breaks the build. Drop the
conditional wrapper around the prototype — the function exists and is
used regardless of the factory-parse flag.

Tested-on: PineTab2 (BES2600WM + RK3566) running linux-pinetab2
6.19.10-danctnix1-1. With the flag defaulted off, factory_parse()
succeeds on the shipped factory.txt, factory_cali_data is populated,
and dmesg no longer shows the parse-fail / read-and-check-error /
factory-cali-data-get-failed sequence.

Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>

bes2600/Makefile

@@ -65,8 +65,8 @@ BES2600_DRV_VERSION := bes2600_0.3.5_2024.0116
 
 ifeq ($(CONFIG_BES2600_CALIB_FROM_LINUX),y)
 FACTORY_CRC_CHECK                    ?= n
-STANDARD_FACTORY_EFUSE_FLAG          ?= y
-FACTORY_PATH                 ?= /lib/firmware/bes2600_factory.txt
+STANDARD_FACTORY_EFUSE_FLAG          ?= n
+FACTORY_PATH                 ?= bes2600/bes2600_factory.txt
 endif
 
 # basic function

bes2600/bes2600_factory.c

@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/fs.h>
+#include <linux/firmware.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/crc32.h>
@@ -137,38 +138,32 @@ static int bes2600_factory_crc_check(struct factory_t *factory_data)
  */
 static int factory_section_read_file(char *path, void *buffer)
 {
-	int ret = 0;
-	struct file *fp;
+	const struct firmware *fw;
+	int ret;
 
 	if (!path || !buffer) {
 		bes_err("%s NULL pointer err\n", __func__);
 		return -1;
 	}
 
-	bes_devel("reading %s \n", path);
+	bes_devel("requesting firmware-class %s\n", path);
 
-	fp = filp_open(path, O_RDONLY, 0); //S_IRUSR
-	if (IS_ERR(fp)) {
-		bes_devel("BES2600 : can't open %s\n",path);
+	ret = request_firmware(&fw, path, NULL);
+	if (ret) {
+		bes_devel("BES2600: request_firmware(%s) failed: %d\n", path, ret);
 		return -1;
 	}
 
-	if (fp->f_inode->i_size <= 0 || fp->f_inode->i_size > FACTORY_MAX_SIZE) {
-		bes_err(			"bes2600_factory.txt size check failed, read_size: %lld max_size: %d\n",
-			fp->f_inode->i_size, FACTORY_MAX_SIZE);
-		filp_close(fp, NULL);
+	if (fw->size == 0 || fw->size > FACTORY_MAX_SIZE) {
+		bes_err("bes2600_factory.txt size check failed, read_size: %zu max_size: %d\n",
+			fw->size, FACTORY_MAX_SIZE);
+		release_firmware(fw);
 		return -1;
 	}
 
-	ret = kernel_read(fp, buffer, fp->f_inode->i_size, &fp->f_pos);
-
-	filp_close(fp, NULL);
-
-	if (ret != fp->f_inode->i_size) {
-		bes_err("bes2600_factory.txt read fail\n");
-		ret = -1;
-	}
-
+	memcpy(buffer, fw->data, fw->size);
+	ret = (int)fw->size;
+	release_firmware(fw);
 	return ret;
 }
 

bes2600/bes2600_sdio.c

@@ -94,7 +94,6 @@ struct sbus_priv {
 	struct work_struct tx_work;
 	struct scatterlist tx_sg[BES_SDIO_TX_MULTIPLE_NUM + 1];
 	struct scatterlist tx_sg_nosignal[BES_SDIO_TX_MULTIPLE_NUM_NOSIGNAL + 1];
-	u8 *tx_bounce;
 	u32 tx_data_cnt;
 	u32 tx_xfer_cnt;
 	u32 tx_proc_cnt;
@@ -1136,26 +1135,7 @@ static void sdio_tx_work(struct work_struct *work)
 				}
 			}
 
-			/*
-			 * The transfer length is rounded up to the SDIO block
-			 * size, but tx_buffer->buf is only tx_buffer->len bytes
-			 * long (it usually aliases into an skb linear head).
-			 * Copy into a driver-owned bounce buffer and zero-pad
-			 * to the aligned size; otherwise DMA reads past the
-			 * skb and leaks adjacent kernel memory on the wire --
-			 * observed as KFENCE OOB reads from
-			 * bes_sdio_memcpy_to_io_helper via dma_map_sg.
-			 */
-			if (WARN_ON_ONCE(total_len + align > MAX_SDIO_TRANSFER_LEN))
-				goto flush_previous;
-			memcpy(self->tx_bounce + total_len,
-			       tx_buffer->buf, tx_buffer->len);
-			if (align > tx_buffer->len)
-				memset(self->tx_bounce + total_len +
-				       tx_buffer->len, 0,
-				       align - tx_buffer->len);
-			sg_set_buf(&sg[scatters],
-				   self->tx_bounce + total_len, align);
+			sg_set_buf(&sg[scatters], tx_buffer->buf, align);
 			total_len += align;
 			++scatters;
 /*del_node:*/
@@ -1873,17 +1853,6 @@ static int bes2600_sdio_probe(struct sdio_func *func,
 	if (!self->single_gathered_buffer)
 		return -ENOMEM;
 #endif
-#ifdef BES_SDIO_TX_MULTIPLE_ENABLE
-	self->tx_bounce = (u8 *)__get_dma_pages(GFP_KERNEL,
-					get_order(MAX_SDIO_TRANSFER_LEN));
-	if (!self->tx_bounce) {
-#ifndef SDIO_HOST_ADMA_SUPPORT
-		free_pages((unsigned long)self->single_gathered_buffer,
-			   get_order(MAX_SDIO_TRANSFER_LEN));
-#endif
-		return -ENOMEM;
-	}
-#endif
 #ifdef BES_SDIO_RXTX_TOGGLE
 	self->fw_started = false;
 #endif
@@ -2012,12 +1981,6 @@ static void bes2600_sdio_remove(struct sdio_func *func)
 		if (self->single_gathered_buffer) {
 			free_pages((unsigned long)self->single_gathered_buffer, get_order(MAX_SDIO_TRANSFER_LEN));
 		}
-#endif
-#ifdef BES_SDIO_TX_MULTIPLE_ENABLE
-		if (self->tx_bounce) {
-			free_pages((unsigned long)self->tx_bounce,
-				   get_order(MAX_SDIO_TRANSFER_LEN));
-		}
 #endif
 		kfree(self);
 	}

bes2600/wsm.h

@@ -2236,7 +2236,5 @@ int wsm_cpu_usage_cmd(struct bes2600_common *hw_priv);
 
 int wsm_wifi_status_cmd(struct bes2600_common *hw_priv, uint32_t status);
 
-#if defined(STANDARD_FACTORY_EFUSE_FLAG)
 int wsm_save_factory_txt_to_mcu(struct bes2600_common *hw_priv, const u8 *data, int if_id, enum bes2600_rf_cmd_type cmd_type);
-#endif
 #endif /* BES2600_HWIO_H_INCLUDED */