test0r
6168e9d340
When mac80211 toggles PSM on the BES2600, the host sends WSM set_pm
and waits up to 5 s on bes_power.pm_enter_cmpl for a firmware-side
PM-changed indication confirming the transition. Three sequenced
flaws make the wait-and-confirm racy and leave host/chip bookkeeping
desynced when anything misfires:
1) bes2600_pwr_notify_ps_changed() unconditionally fires
complete(pm_enter_cmpl) for any non-active psmode. It does not
check whether a host-initiated set_pm is actually pending. A
spontaneous indication (firmware-internal coex move,
idle-driven aging) primes the completion, and the next host-
driven enter_lp_mode sees a false success on its first
wait_for_completion_timeout.
2) The wait/reinit ordering in bes2600_pwr_enter_lp_mode is
status = wait_for_completion_timeout(...);
atomic_set(pm_set_in_process, 0);
reinit_completion(...);
If an indication arrives between wait_for_completion_timeout
returning with status==1 and reinit_completion, the next
enter_lp_mode iteration's wait can also see false success. The
reinit must happen *before* we start the new request, not
after handling the previous one.
3) On wait_pm_ind timeout, the driver returns -ETIMEDOUT and walks
away. It does not record that the firmware's actual PM state
is no longer known to the host. Subsequent wake paths
(gpio_wake / sbus_active) assume the chip is still active and
hit deterministic SDIO failures when the firmware has
transitioned anyway.
This patch is the safe-prerequisite half of a wider fix:
* bes_pwr.h gains enum bes2600_chip_pm_state {ACTIVE, LP, UNKNOWN}
and bes_power.chip_pm_state. Its job is to track what the host
has *seen the firmware confirm*, not what the host has
requested. Initialised to ACTIVE in bes2600_pwr_init().
* bes2600_pwr_notify_ps_changed() unconditionally updates
chip_pm_state on every indication, but only fires
complete(pm_enter_cmpl) when atomic_cmpxchg(pm_set_in_process,
1, 0) succeeds. A spontaneous indication can no longer prime a
waiter that will only set up its request afterwards.
* bes2600_pwr_enter_lp_mode() now reinit_completion()s before
setting pm_set_in_process and sending wsm_set_pm. After a
timeout, it cmpxchgs pm_set_in_process back to 0 (so a late
indication cannot prime the next iteration) and on the win-
cmpxchg branch records chip_pm_state=UNKNOWN.
A follow-up patch consumes chip_pm_state on the wake side
(bes2600_pwr_device_exit_lp_mode + bes2600_gpio_wakeup_mcu) to fix
the deterministic "active mcu fail" cycle this state-record
enables a fix for. Splitting the work this way keeps the lock-free
race fix small and reviewable on its own.
No new locks, no behaviour change on the success path. Only the
recovery path (timeout + spontaneous indication) gains correctness.
Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>