test0r
aff632ea64
On a BES2600-based PineTab2, mac80211's background-scan cadence
(about every 30 s when associated) triggers a two-step WARN splat
pattern, visible in dmesg roughly 30 times per 10 min of regular
WiFi use:
wsm_generic_confirm ret 2
WARNING: at wsm_handle_rx+0x8a4/0xf30 [bes2600]
... full stack trace ...
ieee80211 phy0: wsm_generic_confirm failed for request 0x0007.
WARNING: at bes2600_scan_work+0x5d4/0x810 [bes2600]
... full stack trace ...
ieee80211 phy0: [SCAN] Scan failed (-22).
0x0007 is the WSM start-scan request; status 2 is the firmware's
rejected-by-policy response, which it returns for at least two
conditions:
a) BT A2DP streaming in non-FDD coex mode -- the coex arbiter
in firmware won't grant an off-channel window while a SCO/
A2DP link is queued.
b) A firmware-internal busy state whose exact trigger the
driver cannot observe directly (confirmed on ohm with BT
disconnected -- rejection still fires). Likely transient
firmware-PM transitions.
Both are protocol-level policy responses, not kernel bugs, so the
full stack-trace WARN treatment is counterproductive: it buries
real problems and gets new users convinced the driver is broken.
Three-part fix:
1. struct bes2600_scan grows two fields -- reject_count and
backoff_until -- zero-initialised via the existing
ieee80211_alloc_hw()-provided kzalloc.
2. bes2600_scan_work() now consults bes2600_scan_should_defer()
before calling bes2600_scan_start(). The helper short-
circuits in two cases:
- coex_is_bt_a2dp() is true and coex is not in FDD mode,
since we already know the firmware will reject;
- BES2600_SCAN_REJECT_THRESHOLD (3) consecutive rejections
have fired and the BES2600_SCAN_BACKOFF_JIFFIES (10 s)
backoff window has not yet elapsed.
On defer or on a real firmware rejection, reject_count is
bumped and backoff_until is refreshed. A successful scan
clears reject_count.
3. The WARN_ON(hw_priv->scan.status) at the scan_start() call
site is replaced with a plain branch into the existing
fail: label. wsm_generic_confirm()'s WARN() becomes a
bes_devel() -- the per-request wiphy_warn in wsm_handle_rx
(which includes the offending request id) is kept, so real
debugging information is still on tape.
Net behaviour:
- Expected rejections no longer produce stack traces. The only
log line that remains on a rejected background scan is the
upstream-caller's wiphy_warn identifying request 0x0007 or
equivalent.
- The driver stops hammering the firmware with doomed scan
requests -- 3 rejections trigger a 10 s pause, during which
bes2600_scan_work() returns without issuing WSM 0x0007.
- The scan-completion path is unchanged; mac80211 sees the
scan complete with no results and reissues on its normal
cadence.
- Real protocol-layer bugs (unexpected underflow in the
confirm buffer) still WARN_ON at the 'underflow:' label.
Verified on ohm (PineTab2, linux-pinetab2 6.19.10-danctnix1-1):
WARN splat count dropped from 32 to 0 per 10 min uptime. WiFi
stays associated. No regression in other counters (KFENCE,
sdio_tx_work, RX failure, PS Mode Error, factory cali fail all
remain 0).
Signed-off-by: Markus Fritsche <fritsche.markus@gmail.com>