Add coolpi-cm5-genbook DTS patch that mirrors vendor coolpi-kernel
audio routing for the internal microphone:
routing = "MIC1", "Main Mic",
"MIC2", "Headset Mic";
Necessary-but-not-sufficient: the ES8316 RX aif_out widget power-up
chain is still broken on mainline (separate issue, not addressed
here); a future codec/audio-graph-card driver fix can complete the
capture path once the topology is correct.
Include in ampere fleet manifest.
Adds fleet/ohm.yaml referencing the bes2600 series mirrored in #2 →
patches/driver/bes2600/. Establishes the manifest shape for ohm
(PineTab2 / RK3566 + BES2600).
Includes list defaults to the -danctnix sibling variants (ohm runs the
DanctNIX kernel base), 17 series total. The pure-mainline non-danctnix
variants are NOT included — they exist for vanilla consumers that ohm
doesn't currently have.
What's NOT in this commit (blockers for #5 full closure):
1. PKGBUILD migration to marfrit-packages/arch/linux-pinetab2-danctnix-besser/
PENDING the kernel-agent template renderer (b2sum regen, pkgrel
bump, cumulative-patch generation per build job).
2. Cumulative-patch ordering field (apply_order). Current order on
boltzmann is A,B,C v3,F,G,D,E,C2,c5.x,c6.x,c7,H — NOT alphabetical.
Need explicit apply_order: [...] in this manifest before
ka-promote can replace the hand-managed cumulative.
3. Config-by-manifest. The .config still lives next to the existing
boltzmann PKGBUILD. Migrate when kconfig-by-manifest lands.
4. Orphan retirement (~/src/besser/danctnix-besser-pkgbuild/ on
boltzmann). Surface to fourier campaign for working-state
migration BEFORE deletion. See besser #17 for the regression
that the orphan caused.
All four blockers documented as TODO at the bottom of fleet/ohm.yaml.
Issue #5 stays OPEN pending these.
Generated-by: Claude Opus 4.7 <claude@reauktion.de>
2026-05-16 bisect found that linux-rk3588-marfrit @ f8f3ad9 (the
previous baseline.ref) black-screens ampere — eDP connector reports
connected/enabled/dpms On + SDDM starts + backlight on, but the panel
shows no pixels. Decomposing the suspend/resume patch 0010 into 5
atomic sub-commits and reverting all of them did NOT recover display,
ruling out 0010 as the offender.
The 6 patches already listed in fleet/ampere.yaml's includes apply
cleanly on top of v7.0-rc3 mainline and produce a kernel that boots
with working display + power-off. That's the verified-working baseline,
captured here.
Regression source is in one of the 12 remaining commits f8f3ad9 has on
top of v7.0-rc3. Top suspect: 55d1b3dcc05e "clk: rockchip: rk3588:
Drop CLK_SET_RATE_PARENT from DCLK_VOP2_SRC" (touches display
controller clock parent rate). Bisect campaign separately.
For consumers who want a ready-to-fetch ref instead of
patches-on-mainline, the verified-working tree is on
git.reauktion.de/marfrit/linux-rk3588-marfrit @ ampere-minimal-devices
(7c241f2e2835).
No change to the includes list — same 6 patches as #8, just retargeted
to a baseline they can actually be applied to.
Generated-by: Claude Opus 4.7 <claude@reauktion.de>
Brings the second customized fleet host into kernel-agent's
scope-tagged tree. Sibling PR coming in marfrit-packages with the
arch/linux-ampere-fourier/ PKGBUILD + flat patch + config + extlinux
hook (build-tree-ready form).
Issue #6 ask #1 only — VP9 enablement (ask #2) and AV1 dec integration
(ask #3) are explicitly deferred to a separate session per the user's
direction. The ampere.yaml manifest documents what's excluded and why.
## Patches promoted
Six patches from boltzmann:~/src/misc_patches/genbook/kernel/ get
scope-tagged into kernel-agent's tree:
soc/rockchip/rk3588/
0001-...Add-pwm15-pinctrl-entries.patch (prereq for 0002)
module/coolpi-cm5/
0003-...Fix-power-off-by-enabling-RK806-as-system-power-controller.patch
board/coolpi-cm5-genbook/
0002-...Add-pwm-fan.patch
0004-...Enable-speaker-output-via-audio-graph-card.patch
0005-...Enable-USB-C-PD-charging-via-FUSB302.patch
0008-...Add-lid-switch-and-USB3-PHY-lane-config.patch
Each new scope dir gets a README.md documenting what it carries and
why the scope-level granularity makes sense (pwm15 is SoC-wide,
RK806 power-off is SoM-level not board-level, the rest are
board-specific GenBook quirks).
Note on uncommitted-modifications flag in issue body: patches 0001-0004
have working-tree-only changes in misc_patches that fix malformed
'From: PATCH 000X/000Y' headers (placeholder text instead of an
RFC-2822 author identity). The working-tree versions with proper
'From: Markus Fritsche <mfritsche@localhost>' headers are what we ship
here — the unfixed-on-disk variants would fail patch -i header parsing
on stricter implementations and are user-side cleanup that hasn't been
committed back to misc_patches yet. Markus can commit the cleanup
to that personal repo separately; this PR's ingestion does not depend
on it.
Patches 0006 (HAVE_GCC_PLUGINS Kconfig), 0009 (Bluetooth btrtl),
0010 (multi-driver suspend/wakeup) from the misc_patches series are
intentionally NOT promoted here — they need different scope tags
(arch/arm64/, driver/bluetooth/, soc/rockchip/rk3588/ + driver/ split)
and will follow when their respective campaigns demand them. The
ampere.yaml manifest documents the explicit-defer for each.
## fleet/ampere.yaml manifest
Same shape as fleet/fresnel.yaml. Baseline pinned at marfrit/linux-rockchip
branch linux-rk3588-marfrit @ f8f3ad934433 (the working tree on
boltzmann; 18 commits ahead of v7.0-rc3, current 2026-05-15 tip).
Six scope-tagged patch includes per the apply-order in the package
(pwm15 pinctrl must precede the pwm-fan node consumer).
## ampere-specific bootloader path
Documented in manifest. ampere boots from /boot/firmware/ (vfat
partition on mmcblk0p1), not /boot/ (root partition) like fresnel.
The marfrit-packages PKGBUILD's extlinux-add hook needs to write to
/boot/firmware/extlinux/extlinux.conf, not /boot/extlinux/.
## ampere as 2nd aarch64 build host
Per the README update in PR #7, ampere is now a secondary aarch64
build host. The manifest's build_host: section pins ampere as
self-hosting primary for its own kernel, with boltzmann as secondary
and fermi as fallback. This is the first manifest that has its own
host listed as the primary build target — not ideologically pretty,
but pragmatic: native arch, same uarch, full RAM, no cross-compile
step, no need to wake another host.
Three changes that together flip kernel-agent from spec'd to operational
in the manual-orchestrated form. Real ka-* CLI verbs come in later phases;
this commit gets a first iteration through the pipeline and proves the
flow at the artifact level.
1. Promote vb2_dma_resv RFC v2 series into the scope-tagged tree
Markus iterated v2 locally on boltzmann (kernel-agent-bootstrap dir,
reaching linux-fresnel-fourier pkgrel=14). v2 attaches the producer
fence at device_run in slept-OK context per Dufresne's v1 review on
linux-media. The three patches land under
patches/subsystem/media/videobuf2/dma-resv-release-fence/:
- 0004 (helper) — opt-in vb2 dma_resv producer-fence helper
- 0005 (driver opt-in) — hantro device_run attach
- 0006 (driver opt-in) — rockchip-rga device_run attach
Numbered 4/5/6 because the fresnel build PKGBUILD applies them after
the three 0001/0002/0003 PBP DTS patches; this directory's numbering
follows that apply-order, not the upstream lore series numbering.
README at the scope dir documents fleet eligibility, decision history,
and the v1 → v2 design pivot.
2. Update fleet/fresnel.yaml to include the v2 series
Pre-v2 manifest had a comment block 'Explicitly NOT included … vb2
dma-resv-release-fence … defer until v2 lands'. v2 has landed. Move
those three lines from 'excluded' to 'includes', annotate the decision
inline.
3. README updates
- Build hosts table: add ampere (CoolPi GenBook, RK3588 32GB) as
secondary aarch64 host. Same uarch as boltzmann, on-demand wake via
His. Gives the fleet a second native build target for when boltzmann
is busy (e.g. carrying a firefox-fourier 4h build).
- 'Out of scope this round' bootstrap section: mark vb2_dma_resv as
resolved 2026-05-15, keep panfrost IOMMU_CACHE deferred.
4. First ka-* CLI verb implemented: bin/ka-status
bash, ~120 lines. Reads fleet/*.yaml manifests, queries Gitea for
open [ka:*] issues, probes each reachable host for the installed
kernel-package version. Read-only — no sudo, no host writes. Picks
GITEA_TOKEN from /opt/herding/etc/claude-identities/<host>.creds or
env override.
Proves the agent's Gitea-API + manifest-parsing skeleton works
end-to-end without committing to a full ka-promote/build/install
implementation. Smoke-tested locally:
$ bin/ka-status
kernel-agent status (repo: marfrit/kernel-agent)
open [ka:*] issues total: 1
══ fresnel ══
manifest: arch=arm64 soc=rockchip/rk3399 board=pinebook-pro
package: linux-fresnel-fourier
installed: host-down # (fresnel is currently powered off)
open ka-issues: (none for this host)
No PKGBUILD update in this PR — that lives in marfrit-packages and
ships as a sibling PR (the actual linux-fresnel-fourier-7.0-14 publish).
claude-noether
claude-noether