Reference the 3 patches imported in the previous commit under the
scope-tagged patch list. Apply order is strict (0001 → 0002 → 0003).
Verified 2026-05-18 via the arch_vp9_test extlinux boot on ampere:
- VP9F enumerates on rkvdec /dev/video2
- kdirect decode bit-exact vs libavcodec SW reference at -ss 30
- libva decode (firefox/chromium-style consumer) also bit-exact
- vainfo lists VAProfileVP9Profile0 (iter38 multi-device probe auto-picks)
- All three paths agree on sha
c8624d7c42db66525f53a02a515bc38d0a17ef39f692660cc7bebb1e2d2e1b48
Removes VP9 from the "explicitly not included" comment block — issue
#12 closes with this change.
Also: AV1 stays out-of-scope per issue #6 ask 3 (kernel side fine via
the existing av1-vpu-dec node; backend just needs the 4th-fd
generalization tracked in libva-v4l2-request-fourier#2).
The next linux-ampere-fourier package rebuild from this manifest
will pick up VP9 automatically; ampere's running
7.0.0-rc3-vp9-test+ kernel already has these patches via the
operator's manual build session today.
Add coolpi-cm5-genbook DTS patch that mirrors vendor coolpi-kernel
audio routing for the internal microphone:
routing = "MIC1", "Main Mic",
"MIC2", "Headset Mic";
Necessary-but-not-sufficient: the ES8316 RX aif_out widget power-up
chain is still broken on mainline (separate issue, not addressed
here); a future codec/audio-graph-card driver fix can complete the
capture path once the topology is correct.
Include in ampere fleet manifest.
2026-05-16 bisect found that linux-rk3588-marfrit @ f8f3ad9 (the
previous baseline.ref) black-screens ampere — eDP connector reports
connected/enabled/dpms On + SDDM starts + backlight on, but the panel
shows no pixels. Decomposing the suspend/resume patch 0010 into 5
atomic sub-commits and reverting all of them did NOT recover display,
ruling out 0010 as the offender.
The 6 patches already listed in fleet/ampere.yaml's includes apply
cleanly on top of v7.0-rc3 mainline and produce a kernel that boots
with working display + power-off. That's the verified-working baseline,
captured here.
Regression source is in one of the 12 remaining commits f8f3ad9 has on
top of v7.0-rc3. Top suspect: 55d1b3dcc05e "clk: rockchip: rk3588:
Drop CLK_SET_RATE_PARENT from DCLK_VOP2_SRC" (touches display
controller clock parent rate). Bisect campaign separately.
For consumers who want a ready-to-fetch ref instead of
patches-on-mainline, the verified-working tree is on
git.reauktion.de/marfrit/linux-rk3588-marfrit @ ampere-minimal-devices
(7c241f2e2835).
No change to the includes list — same 6 patches as #8, just retargeted
to a baseline they can actually be applied to.
Generated-by: Claude Opus 4.7 <claude@reauktion.de>
Brings the second customized fleet host into kernel-agent's
scope-tagged tree. Sibling PR coming in marfrit-packages with the
arch/linux-ampere-fourier/ PKGBUILD + flat patch + config + extlinux
hook (build-tree-ready form).
Issue #6 ask #1 only — VP9 enablement (ask #2) and AV1 dec integration
(ask #3) are explicitly deferred to a separate session per the user's
direction. The ampere.yaml manifest documents what's excluded and why.
## Patches promoted
Six patches from boltzmann:~/src/misc_patches/genbook/kernel/ get
scope-tagged into kernel-agent's tree:
soc/rockchip/rk3588/
0001-...Add-pwm15-pinctrl-entries.patch (prereq for 0002)
module/coolpi-cm5/
0003-...Fix-power-off-by-enabling-RK806-as-system-power-controller.patch
board/coolpi-cm5-genbook/
0002-...Add-pwm-fan.patch
0004-...Enable-speaker-output-via-audio-graph-card.patch
0005-...Enable-USB-C-PD-charging-via-FUSB302.patch
0008-...Add-lid-switch-and-USB3-PHY-lane-config.patch
Each new scope dir gets a README.md documenting what it carries and
why the scope-level granularity makes sense (pwm15 is SoC-wide,
RK806 power-off is SoM-level not board-level, the rest are
board-specific GenBook quirks).
Note on uncommitted-modifications flag in issue body: patches 0001-0004
have working-tree-only changes in misc_patches that fix malformed
'From: PATCH 000X/000Y' headers (placeholder text instead of an
RFC-2822 author identity). The working-tree versions with proper
'From: Markus Fritsche <mfritsche@localhost>' headers are what we ship
here — the unfixed-on-disk variants would fail patch -i header parsing
on stricter implementations and are user-side cleanup that hasn't been
committed back to misc_patches yet. Markus can commit the cleanup
to that personal repo separately; this PR's ingestion does not depend
on it.
Patches 0006 (HAVE_GCC_PLUGINS Kconfig), 0009 (Bluetooth btrtl),
0010 (multi-driver suspend/wakeup) from the misc_patches series are
intentionally NOT promoted here — they need different scope tags
(arch/arm64/, driver/bluetooth/, soc/rockchip/rk3588/ + driver/ split)
and will follow when their respective campaigns demand them. The
ampere.yaml manifest documents the explicit-defer for each.
## fleet/ampere.yaml manifest
Same shape as fleet/fresnel.yaml. Baseline pinned at marfrit/linux-rockchip
branch linux-rk3588-marfrit @ f8f3ad934433 (the working tree on
boltzmann; 18 commits ahead of v7.0-rc3, current 2026-05-15 tip).
Six scope-tagged patch includes per the apply-order in the package
(pwm15 pinctrl must precede the pwm-fan node consumer).
## ampere-specific bootloader path
Documented in manifest. ampere boots from /boot/firmware/ (vfat
partition on mmcblk0p1), not /boot/ (root partition) like fresnel.
The marfrit-packages PKGBUILD's extlinux-add hook needs to write to
/boot/firmware/extlinux/extlinux.conf, not /boot/extlinux/.
## ampere as 2nd aarch64 build host
Per the README update in PR #7, ampere is now a secondary aarch64
build host. The manifest's build_host: section pins ampere as
self-hosting primary for its own kernel, with boltzmann as secondary
and fermi as fallback. This is the first manifest that has its own
host listed as the primary build target — not ideologically pretty,
but pragmatic: native arch, same uarch, full RAM, no cross-compile
step, no need to wake another host.
marfrit
claude-noether
claude-noether