test0r
3d15c5367d
Two additions to fleet/ohm.yaml's includes for the bes2600 driver scope: 1. driver/bes2600/tx-sdio-dma-oob-danctnix/ — already on disk from ka#17 but not previously included. The cumulative-c5x-danctnix shipped in pkgrel=3 did NOT have this fix; pkgrel=4 per-series regressed because the staging-prep series was excluded. KFENCE caught the OOB during pkgrel=4 soak; pkgrel=5 included it. 2. driver/bes2600/join-confirm-reset-danctnix/ — NEW scope. cw1200 ancestor port (sta.c:1339-1344) with bes2600-specific PASSIVE-gate compensation in bes2600_unjoin_work. Closes besser#25. Verified pkgrel=6 srcversion 0E16463F: cascade gone, periodic ~600ms latency jitter also gone (same root cause). Status note: per-series reconstruction is now converged. The cumulative-c5x-danctnix entry is left as historical fallback; ka#29's blocker (per-series mirrors not applying cleanly) was resolved by manually reconstructing the per-series in marfrit/bes2600-dkms bes2600/join-confirm-failure-reset (top commit 3d833f8). Build still hand-managed via boltzmann:~/src/besser/marfrit-besser/ danctnix-besser-pkgbuild/kernel/PKGBUILD; ka-promote / ka-build template rendering still pending per the original TODOs. Signed-off-by: Claude (noether) <claude@reauktion.de>
patches/driver/bes2600/
BES2600 WiFi driver patches (drivers/staging/bes2600/*, mainline-bound).
Mirrored from marfrit/besser/patches/ on 2026-05-16.
Scope tag: driver:bes2600 (see fleet/ohm.yaml for the consumer).
Consumer: ohm (PineTab2, RK3566 + BES2600 SDIO).
Series taxonomy
30 series (15 base + 15 -danctnix siblings). The -danctnix
variants exist because vanilla series don't apply on the DanctNIX
kernel base (slightly different in-tree state for drivers/staging/bes2600/*).
Keep both as separate series until BES2600 lands upstream, then
collapse — issue #2 acceptance criterion.
Each series directory contains numbered .patch files plus
optionally a 0000-cover-letter.patch for multi-patch series.
Promotion eligibility (per series)
Marked here for the kernel-agent CLI (ka-promote) to pick up.
Markus to update as series mature. Default UNSET means "ask before
including in a build".
| Series | promote_eligible | Notes |
|---|---|---|
debian-copyright-fsf-address |
unset | Debian packaging metadata; not kernel-side |
drop-dpd-file-paths |
unset | |
drop-dpd-file-paths-danctnix |
unset | DanctNIX sibling |
drop-orphan-file-io |
unset | |
drop-orphan-file-io-danctnix |
unset | DanctNIX sibling |
enable-testmode |
unset | |
factory-drop-kernel-write |
unset | |
factory-drop-kernel-write-danctnix |
unset | DanctNIX sibling |
factory-series |
unset | |
factory-thread-dev |
unset | |
lmac-recover-via-mmc-hw-reset |
unset | |
lmac-recover-via-mmc-hw-reset-danctnix |
unset | DanctNIX sibling |
pm-detect-firmware-unsupported |
unset | |
pm-detect-firmware-unsupported-danctnix |
unset | DanctNIX sibling |
pm-gate-on-handshake |
unset | |
pm-state-resync |
unset | |
pm-state-resync-danctnix |
unset | DanctNIX sibling |
pm-timeout-silence |
unset | |
pm-timeout-silence-danctnix |
unset | DanctNIX sibling |
pm-wake-consume-state |
unset | |
pm-wake-consume-state-danctnix |
unset | DanctNIX sibling |
remove-chardev-user-interface |
unset | Cross-ref bes_chardev merge regression (besser #17) |
scan-defer-backoff-tune |
unset | |
scan-defer-backoff-tune-danctnix |
unset | DanctNIX sibling |
scan-defer-on-reject |
unset | |
scan-defer-on-reject-danctnix |
unset | DanctNIX sibling |
staging-prep-series |
unset | 7-patch cover-letter series; upstream-staging-prep work |
staging-prep-series-danctnix |
unset | DanctNIX sibling |
tx-sdio-dma-oob |
unset | |
tx-sdio-dma-oob-danctnix |
unset | DanctNIX sibling |
DKMS-to-in-tree transition path
bes2600-dkms (Mobian fork, in marfrit/bes2600-dkms) is the
out-of-tree shim that ohm currently uses for the BES2600 wifi+BT.
Once these driver/bes2600/ series land in mainline (or at least in
DanctNIX's PineTab2 kernel base):
- ohm's manifest drops the
bes2600-dkmspackage dependency kernel-agentbuilds the in-tree variant via the series listed heremarfrit/bes2600-dkmsrepo gets archived (kept as history)- PineTab2 buyers from then on get bes2600 directly out of the kernel
Track the dropdown in fleet/ohm.yaml (replaces_dkms: bes2600-dkms
once the cumulative series is enough to replace it).
Cumulative-patch generation order
The current single-patch cumulative (0001-bes2600-besser-cumulative-series.patch
in the existing PKGBUILD) is generated in this order on boltzmann:
A, B, C v3, F, G, D, E, C2, c5.x, c6.x, c7, H
This is NOT alphabetical — C2 follows E rather than coming after
C v3. ka-promote MUST honor an explicit series-ordering field
when concatenating, not sort by series name. Field name TBD; suggest
adding apply_order: to fleet/ohm.yaml (issue #5 will surface this
when the cumulative gets regenerated).
References
- Issue:
git.reauktion.de/marfrit/kernel-agent/issues/2 - Source repo:
git.reauktion.de/marfrit/besser/patches/ - Consumer: ohm (
fleet/ohm.yaml) - Related:
bes2600-dkms,linux-pinetab2-danctnix-besserPKGBUILD